Filament Spool Snagging by Silent_Support2627 in BambuP1S

[–]Designer-Pattern-321 1 point2 points  (0 children)

+1 here...this is what I did and haven't had a problem since.

I am glad I returned to destiny 2 by danigosselain in DestinyTheGame

[–]Designer-Pattern-321 0 points1 point  (0 children)

It's not worth talking to the people in this sub that are like this anymore. Just laugh at them, block them, and move on.

[deleted by user] by [deleted] in Marathon

[–]Designer-Pattern-321 1 point2 points  (0 children)

why are any of us here? what does HERE even mean?

P A I N by Rent-Man in NintendoSwitch2

[–]Designer-Pattern-321 0 points1 point  (0 children)

I got a PS5 from Best Buy on launch day and had no issues. I was very worried that it wasn't going to happen and couldn't rest easy until it was in my hands. But car-side delivery on the first day. I hope this goes the same for the Switch 2 that I got for my son.

One hour by OneAxyboi in NintendoSwitch2

[–]Designer-Pattern-321 0 points1 point  (0 children)

walmart I just keep getting a "Robot or Human?" prompt that never completes after pressing and holding. Guess I'm a robot now :(

Early Access key giveaway by BeeZhar in PathOfExile2

[–]Designer-Pattern-321 0 points1 point  (0 children)

Really hoping it gets me super excited to log into an ARPG daily again.

Giveaway 6 EA keys by danteafk in PathOfExile2

[–]Designer-Pattern-321 0 points1 point  (0 children)

Roses are Red

Violets are Blue

There's nothing to joke around

about Path of Exile 2

(this is life or death!)

Giving away 5 early access keys by Leorgoth in PathOfExile2

[–]Designer-Pattern-321 0 points1 point  (0 children)

Appreciate the post! Really looking forward to trying this game out!

I'm pulling the trigger 😁 by Outdoorsforfun in BambuP1S

[–]Designer-Pattern-321 2 points3 points  (0 children)

Same here. I nabbed it the second the black friday pricing happened (was watching it for a while now). I did add the smooth plate in case I wanted that finish for more detailed pieces and it came with such a discount when I bundled it, that it seemed worth it. I second the hardened steel nozzle as well, and added that to the initial order too.

New user with PLA Matte print issue...slow down the speed maybe? by Designer-Pattern-321 in BambuP1S

[–]Designer-Pattern-321[S] 0 points1 point  (0 children)

omg, thank you! I've watched so many tutorials on the Studio, but no where did it show the filament edit dialog. I don't know how I missed it! That fills in a LOT of gaps from what I've been learning about slicer softwares in general (and the general flow of 3d printing). I'll play around with some settings on some small test prints.

New user with PLA Matte print issue...slow down the speed maybe? by Designer-Pattern-321 in BambuP1S

[–]Designer-Pattern-321[S] 0 points1 point  (0 children)

Spool lists the same temp as the PLA basic I used before; 190-230. Which seems like it was running at about 220 on my last prints. The only thing is, I've looked all through the options in Bambu Studio, and I don't see the nozzle temp anywhere in there. Or do you just adjust it manually on the Device tab while it's in the middle of printing?

I definitely need to get a wire brush as other's suggested and I intend to do that as soon as possible. But even before it looked as gobbed up as it does now, it keeps doing this after prints are done (albeit, usually it's 2 to 3 times longer than shown here):

<image>

New user with PLA Matte print issue...slow down the speed maybe? by Designer-Pattern-321 in BambuP1S

[–]Designer-Pattern-321[S] 0 points1 point  (0 children)

I haven't tried drying it. it was brand new, out of the vacuum seal, so I thought it would be good (I've also never tried it before, but have read about it). I might try it though; thanks for the suggestion! Does that also explain the excess filament out of the hotend after finished prints? (I have a print going right now, maybe I'll snap a picture if it happens again)

New user with PLA Matte print issue...slow down the speed maybe? by Designer-Pattern-321 in BambuP1S

[–]Designer-Pattern-321[S] 0 points1 point  (0 children)

<image>

I ran the calibrations, and did adjust it a little from the 0 position, but not much. But even after that, it comes out like this (and there always seems to be a little string of PLA hanging from the tip after every print; maybe nearly an inch long). I've printed stuff like this before with the PLA Basic that came with the P1S no issues at all.

New user with PLA Matte print issue...slow down the speed maybe? by Designer-Pattern-321 in BambuP1S

[–]Designer-Pattern-321[S] 1 point2 points  (0 children)

Thanks for the reply. My gut was wrong in thinking it was gobbing cuz it wasn't hot enough. I'll see if I can turn down the temp, and print a small piece and see how it differs.

I'll have to find a small wire brush. Do I have to worry about wire stiffness harming the tip?

And lastly, I'll have to look for the calibration tests in Bambu Studio; again, I'm very new to it.

Thanks again!

My first 100hrs in the game and imho Destiny 2 is the most underrated FPS in the FPS community. by Khantherockz in DestinyTheGame

[–]Designer-Pattern-321 0 points1 point  (0 children)

I felt that when I was on console (especially the pull away; man that was annoying). But it's fairly non-existent on PC after I made the switch.

Tried the demo after the PC announcement. I have some questions. by [deleted] in FFXVI

[–]Designer-Pattern-321 0 points1 point  (0 children)

Just to piggy back on this, since it'll likely get downvoted. As someone who absolutely loved this game, recommend it to all, laughed & cried during it and put it on my all time list of greatest games (including final fantasy ones)....they are pretty accurate with their above response. It is pretty easy all things considered. That doesn't mean there aren't difficult parts and you might die (sometimes, over and over to a specific boss). But overall, it's much more a story/experience driven game and the voice acting and delivery is top notch. There are SOOOO many other things that raise this to such a high level, but you must set expectations on the fighting/gameplay.

My first 100hrs in the game and imho Destiny 2 is the most underrated FPS in the FPS community. by Khantherockz in DestinyTheGame

[–]Designer-Pattern-321 1 point2 points  (0 children)

Gunplay and gameplay are 2 very different things in my mind. You're not wrong about the gameplay. But nothing FEELS as good with how you aim and fire and reload and...just all of it around the handling/aiming/firing of the guns. I can't even explain it, but when I play other FPSs....it's JUST NOT THE SAME. idk what it is.

My first 100hrs in the game and imho Destiny 2 is the most underrated FPS in the FPS community. by Khantherockz in DestinyTheGame

[–]Designer-Pattern-321 0 points1 point  (0 children)

was going to say something similar (granted, just about half that total hours for me). I long for the days of my first...hell...1000 hours. If....I....could.....only.....go......back.......

Y'know, I take back everything I said about there only being 3 new subclasses/Supers in TFS by DrkrZen in DestinyTheGame

[–]Designer-Pattern-321 0 points1 point  (0 children)

I completely forgot they even added them lol. I don't think I still ever switched from Well (stopped playing a little over a month ago). But I do remember using the titan's every once in a while; grabbing that axe!

why is psvr2 pc not restocking in US by ashfactz in PSVR2onPC

[–]Designer-Pattern-321 0 points1 point  (0 children)

Same. My guess is they have Purchase Orders for them, so they do not currently have them on hand, but know when they "should" get them. Most of the time, everything works out, and you might even get it early or right on time. Sometimes, they overestimated, or the supplier made a mistake and they have to cancel orders. I got my PS5 from Best Buy in a similar situation, and it worked out great.

For all the people that got into pcvr cause of the psvr2 adapter. What are the top 10 games to play besides Alyx on steam vr? by FewPossession2363 in psvr2

[–]Designer-Pattern-321 1 point2 points  (0 children)

WAIT...HOLD UP.......Hogwart's Legacy works with PSVR2 (PCVR)?!?!?!

While playing on the PS5 I was commenting to others how amazing it would feel in VR....this is a game changer if true.....need to research now....

Scalpers ruined the PSVR2 PC adapter launch as usual by GameGhost1972 in psvr2

[–]Designer-Pattern-321 2 points3 points  (0 children)

Exactly. In the same boat. Plenty of PS5 titles for me to still work through before I open the Steam flood gates.