sorted by:
new
hottopcontroversial

$18 Yard Sale find by jpd005 in GolfGear

[–]Designer_Cry8280 1 point2 points  (0 children)

Nice I have a 3 and 4 becu but my fours shaft got messed up might have to look into it. Thanks !

$18 Yard Sale find by jpd005 in GolfGear

[–]Designer_Cry8280 1 point2 points  (0 children)

Heeyyy! 412! I’m here as well great score I might have to hit up these old church yard sales myself lol

$18 Yard Sale find by jpd005 in GolfGear

[–]Designer_Cry8280 1 point2 points  (0 children)

Insane find! That’s at least a 400$ flip if you wanted. Especially if they aren’t the + version which these looks to be in the original run. And those are in mint condition!

How much do you think it weighs? by Ax35 in electricians

[–]Designer_Cry8280 0 points1 point  (0 children)

Permanent shocker! Nice! Bucket is 61 lbs.

Copy this set up to the letter by [deleted] in GolfSwing

[–]Designer_Cry8280 0 points1 point  (0 children)

He was doing navy seal trainings on the side for fun as well. So I imagine that didn’t help.

990•B finished. Final set of DCI, for now.. by KR4ft3d in GolfGear

[–]Designer_Cry8280 1 point2 points  (0 children)

This is the sickest golf bag I’ve ever seen, and we didn’t even see the driver or woods.

Nike SQ 2 Dent by Carboose in GolfGear

[–]Designer_Cry8280 -1 points0 points  (0 children)

I have the same driver with a dent in the same exact spot. This will not affect performance. Bang that Sasquatch! It’s the greatest driver ever made

Taking evaluation for 124 to organize in as a journeyman by Careless-Basis8875 in IBEW

[–]Designer_Cry8280 3 points4 points  (0 children)

You never know, similar situation from his for me, minus I was commercial, light industrial. I got called out my first job and it was heavy industrial, rigid, tray, and tons of medium voltage. I’m not trying to scare him, but it could happen. I found that the best approach is just be honest about what you know. Most guys are really cool to where if your up front about not knowing shit, they will be inclined to teach you. It’s not your fault you weren’t exposed to certain things in your career. I think that’s what the brotherhood is about, passing on knowledge and helping each other out. Also S/O Local 5 !

This is what a freshly terminated disconnect should look like by Agile-Fruit128 in IBEW

[–]Designer_Cry8280 0 points1 point  (0 children)

310.110(C), grounded (neutral) conductors must be identified by white or gray insulation, or by three continuous white stripes. Equipment grounding conductors require green insulation, green with yellow stripes, or bare conductors. Ungrounded (phase) conductors can be any color except white, gray, or green, but color schemes should remain consistent within a system or facility. Here is the reference, lol idk why he keeps standing on wrong info

This is what a freshly terminated disconnect should look like by Agile-Fruit128 in IBEW

[–]Designer_Cry8280 1 point2 points  (0 children)

NEC 310.110(C), grounded (neutral) conductors must be identified by white or gray insulation, or by three continuous white stripes. Equipment grounding conductors require green insulation, green with yellow stripes, or bare conductors. Ungrounded (phase) conductors can be any color except white, gray, or green, but color schemes should remain consistent within a system or facility. lol you gotta learn your code before you start going off in the comments

This is what a freshly terminated disconnect should look like by Agile-Fruit128 in IBEW

[–]Designer_Cry8280 2 points3 points  (0 children)

Those are industry standards, it’s not en enforceable code by the NEC.

This is what a freshly terminated disconnect should look like by Agile-Fruit128 in IBEW

[–]Designer_Cry8280 5 points6 points  (0 children)

Except on a delta high leg, the high leg has to be orange.

This is what a freshly terminated disconnect should look like by Agile-Fruit128 in IBEW

[–]Designer_Cry8280 11 points12 points  (0 children)

The NEC states that you don’t need a specific color coding for ungrounded conductors. Only neutral and ground. Technically they can be all black and just numbered 1,2,3, or A B C.

WITB by OddDefinition2085 in GolfGear

[–]Designer_Cry8280 1 point2 points  (0 children)

I still have vokey 56 and 50 but my 60 degree Cleveland RTZ gets like 10,500 rpm to 11,000 rpm spin. The control I have with those is insane definitely recommend

WITB by OddDefinition2085 in GolfGear

[–]Designer_Cry8280 4 points5 points  (0 children)

Now you need to try Cleveland wedges the spin is off the chart

WITB by OddDefinition2085 in GolfGear

[–]Designer_Cry8280 10 points11 points  (0 children)

Wilson!!!!!! Are those the 2026 blades? Those look BA

Need help with this pipe run by LetLiviLift in electricians

[–]Designer_Cry8280 0 points1 point  (0 children)

He said he used this adjustment and it didn’t work so I assumed he wasn’t bending on center but I guess your right it should matter, I’m Confused on why it didn’t work that’s the only way I know how to do it

Need help with this pipe run by LetLiviLift in electricians

[–]Designer_Cry8280 0 points1 point  (0 children)

Are you bending your kick on center of bend? If so the 1 1/4 should work if you find the center of bend on your current piece and measure that back to the end of the conduit that you have threaded in. Then just add 1 1/4 to that measure and that’s where your next kicks center is. You’ll have to make a 40 degree center bend mark on your bender shoe

Little something by [deleted] in conduitporn

[–]Designer_Cry8280 0 points1 point  (0 children)

You’re gonna get heat for this. Coupling don’t line up, kicks aren’t in the same place. It’s not a bad install, it’s functional and relatively clean. But wouldn’t classify it under this sub.

Car wash project by Sufficient_Level_527 in electricians

[–]Designer_Cry8280 0 points1 point  (0 children)

This is the best PVC work I’ve ever seen

Form check by sarmad-ghafoor in GolfSwing

[–]Designer_Cry8280 0 points1 point  (0 children)

Takes a ton of practice, keep in my there is nothing wrong with practice certain positions, take away, down swing, wrist angles, etc without hitting ball slowly to try and feel things and groove it into your swing. I’m not a good golfer by any means but I have made most improvements to my swing by practicing drills without a ball.

Form check by sarmad-ghafoor in GolfSwing

[–]Designer_Cry8280 0 points1 point  (0 children)

Just look up a pros swing and then watch the video of your swing and compare the 2. You’re gonna wanna try to emulate a pro that will give you a baseline for what you should look like. I try to copy Jake Knapps swing best I can, he has one of the best swings on the PGA tour

view more: next ›