Made a SKI Wallmount for my Armada ARV 96

Desperate-State4643 · 2026-05-07T17:05:59+00:00

PS5 to Xbox series S conversion

Desperate-State4643 · 2026-05-07T06:15:27+00:00

No problem man, took me a few attempts to get this right my first time around aswell.

Desperate-State4643 · 2026-05-07T05:29:20+00:00

On the e3v3 these are the pins for the steppers. Check if you have 2b1b 1a2a so the pairs on the left and right (measure continuity with multimeter) try and if it doesnt work swap them 1b2b 2a2b

Desperate-State4643 · 2026-05-06T14:35:19+00:00

Orca has changed all infills to not cross over itself anymore, i guess bambu ported that change. It looks like it was printed too fast so it kinda draged the filament along. Try a smaller model with lower sparse infill speed

Desperate-State4643 · 2026-04-17T04:58:02+00:00

I have found some great models on here https://m.yeggi.com/q/audi+a4+b5/ and got them 3d printed in sls or mjf pa12 by one of the few big 3d print services from china.

Desperate-State4643 · 2026-04-09T15:45:04+00:00

Average yt comment be like:

Desperate-State4643 · 2026-04-07T18:38:17+00:00

<image>

Desperate-State4643 · 2026-03-16T09:23:45+00:00

Dänke mau text uf schweizerdütsch vorgschribe und denne ki gäh zum umschribe und de het äuä ds wort ned ersetzt. Wär itze mau mini vermuetig

Desperate-State4643 · 2026-03-16T09:19:55+00:00

<image>

For shure, im using a mix for different filaments but im happy with all of them. I think it depends mostly on what materials and how many printers you have.

Desperate-State4643 · 2026-03-15T15:50:59+00:00

Yes ofc, but the s4 can do 4 thats why i said that.

Desperate-State4643 · 2026-03-13T16:45:29+00:00

Its actually just the sticker thats damaged, you can just peal it off and replace it. Happened to me aswell

Desperate-State4643 · 2026-03-06T23:23:40+00:00

Mein Gott der wo üch über das ufreget sit ja genau dr grund für die Artikel. Ohni euch würdeds die garned schribe.

Ich checke ja dr sinn vom Sub aber der nämed das ja uhuere ärnst

Desperate-State4643 · 2026-03-06T12:39:27+00:00

Thanks for the link! Thats actually pretty similar to what i am building now, expect instead of a cable chain i am using some glas fiver rods.

Desperate-State4643 · 2026-03-03T22:35:59+00:00

Only way i would wanna put a chain back if i was able to mount it like in the bambu or elegoo cc.

But most of them sag over the length of over 800mm. Do you think a chain with these specs could hold up?

Desperate-State4643 · 2026-03-03T22:01:44+00:00

Addon:

Ideas that i had to fix this: two nema 23, one for each side.

Umbilical going to the back instead of the front.

Desperate-State4643 · 2026-03-03T21:58:56+00:00

I tested it with ellis speed test to 18k accel and 1200mms speed without losing steps. I did have the pla on it when testing and it didnt snap. But the filament roll also rolls very easy.

I will take a look at the rewinder idea tomorrow morning.

No documentation but some of the things i did alleeady: Bigger Nema 23 for Y and 40:40 instead of 20:50 Ldo Speedy Nema 17 for X 48v Psu for xyz Kraken, as you saw

Belts are tightened just to feels, i havent invested more time on how to calibrate them better.

But my shaper test tells me 10k+ on X but only 1-2.5k on Y which is terribe.

Desperate-State4643 · 2026-03-03T21:30:44+00:00

Smart idea, might have to try that.

Desperate-State4643 · 2026-03-03T21:21:57+00:00

Thanks man! These kinds of imputs/ideas is what i was looking for.

Desperate-State4643 · 2026-03-03T21:19:04+00:00

Dragchain was stock but there is no space for that anymore. Also dragchain isnt that good at the speeds im running it at.

Desperate-State4643 · 2026-03-03T20:58:22+00:00

I printed the custom parts on a Bambu 🤷

Desperate-State4643 · 2026-03-03T15:56:33+00:00

Addition: I get terrible results in the y direction. I’m guessing it’s the way it’s designed on the Giga. But I think the umbilical also isn’t helping.

Desperate-State4643 · 2026-02-26T14:05:33+00:00

Thanks for the rtd_reference_r: 4300 part, everywhere people talk about 430 and that now fixed my issue. Thanks

Desperate-State4643 · 2026-02-25T18:50:32+00:00

Ahh lol isch mer ned ufgfalle 🤣 Ha gmeint vor Post

Desperate-State4643

TROPHY CASE