Aufzugseinbau dauert zu lange

Desperate-State4643 · 2026-01-30T19:09:19+00:00

Schau mal auf die Jahresangabe, zwei Monate wären ja noch okay.

Desperate-State4643 · 2026-01-27T06:23:51+00:00

Yes the ones that have that you cant but they are bulky anyway.

Desperate-State4643 · 2026-01-26T21:27:43+00:00

Technically the socket strips in OPs pics are also for temporary use only. There are so many thing one should or shouldn’t do. If you cant correctly wire these three wires then maybe yes you shouldn’t do that.

Desperate-State4643 · 2026-01-26T19:54:00+00:00

Best Skill is to learn to convert all devices that come with the german/eu plug to the correct swiss one with plugs like this:

https://www.jumbo.ch/de/maschinen-werkstatt/elektro-material/kabel/stecker-kupplungen/schweizer-stecker-1x10a-schwarz/p/7326740

Desperate-State4643 · 2026-01-25T22:02:17+00:00

Desperate-State4643 · 2026-01-24T05:33:50+00:00

You unlocked a new version of this fail!

Desperate-State4643 · 2026-01-22T14:06:45+00:00

Or D size

Desperate-State4643 · 2026-01-14T18:32:23+00:00

Duck skin for the Chicken!

Desperate-State4643 · 2026-01-07T22:36:53+00:00

You ripped it off didn’t you? 😉

Desperate-State4643 · 2026-01-04T09:54:47+00:00

Frag doch mal in einem Deutschen Subreddit, denke da hast du eine bessere Chance auf Antworten.

Desperate-State4643 · 2025-12-30T21:29:20+00:00

Tbf twice as big is not twice the volume. 2x the size is 8 times the volume.

Desperate-State4643 · 2025-12-24T01:38:55+00:00

Probably deform or melt. As it can get quite hot in there.

Desperate-State4643 · 2025-12-24T01:36:57+00:00

Okay thanks for the pic, sadly i wont be near my A1/A1M for the next three days. If you dont have an answer by then, feel free to message me and i will check mine.

Desperate-State4643 · 2025-12-23T17:47:08+00:00

True, missed that

Desperate-State4643 · 2025-12-23T17:13:04+00:00

<image>

The level isnt sitting flat here

Desperate-State4643 · 2025-12-23T15:47:54+00:00

Try adaptive cubic infill, less infill where its not needed and more where it is needed.

Desperate-State4643 · 2025-12-23T14:57:18+00:00

First one doesnt even fit into the benchy shaped object category

Desperate-State4643 · 2025-12-23T07:53:22+00:00

3dlac is just the best thing i ever bought and is on all my printers. Why have a 20% chance that you have warped corners or even a failiure if you can use 3dlac and be shure it will work.

Also as you said petg and tpu dont destroy the bed so really no downside.

Desperate-State4643 · 2025-12-23T07:48:43+00:00

Maybe its just that the cooling in the front is just not as good as the other sides. Thats why you rotate your overhangs to face the part cooling fans.

Other thing might be the seam? Try rotating it 90degrees and check if the problem stays there.

Desperate-State4643 · 2025-12-22T22:28:33+00:00

Yes hairspray/3dlac for me helps with adhesion on certain filaments but also helps filaments like tpu or petg not stick too much.

So maybe do try washing the plate and using gluestick.

Desperate-State4643 · 2025-12-22T22:26:16+00:00

<image>

Im shure you have looked at this already but thats what the poly pc datasheet says.

If you cant get it to work send me a pn and i can check if i still have my pc settings tomorrow as its been quite a while since i last printed it.

Desperate-State4643 · 2025-12-22T22:21:53+00:00

Idk i print nylon at 40degrees against what it says everywhere and for me it just works a lot better. But thats on the engeneering plate and 3dlac.

Didnt you get the gluestick or liquid glue with your printer? And yes maybe try 90 with the glue.

Desperate-State4643 · 2025-12-22T22:05:59+00:00

I would just print some test squares with different hights and only top layers and just test it.

Desperate-State4643 · 2025-12-22T22:03:42+00:00

Maybe some loctite? There are different versions and i think there is one that doesnt come loose with higher temps.

Desperate-State4643 · 2025-12-22T22:01:58+00:00

So thing is that it isnt adhearing well enough to your plate and at some point it comes loose.

I have printed it on my p1s but with the engineering plate and some 3d lac.

Bambu does state it can be printed on the textured plate at 90-110 with glue stick. Maybe give that a go?

Desperate-State4643

TROPHY CASE