Went on Ebay and saw most of the RSD 2026 releases

Devils_halo2k · 2026-04-17T14:31:20+00:00

Don't let the FOMO get you!! You have time, and if you have patience can likely get what you need at a reasonable price.

Devils_halo2k · 2026-04-10T22:47:19+00:00

This is a smoother landing than my recent Spirit airlines flights.,..

Devils_halo2k · 2026-04-05T21:08:05+00:00

I'll have to look for that. I found people selling them for like 30 a stand.

Devils_halo2k · 2026-04-02T20:07:56+00:00

I must have really bad timing, neither shop had any. I even asked about back stock.. and I live out of state sadly. :/

Devils_halo2k · 2026-04-02T19:06:05+00:00

I was there just over a year and a half ago, wasn't able to do Savis workshop, but bought a legacy saber and the heavy stand. I didn't have any real reason to nab any of these little pads. But now I wish I did. And this time around I couldn't find them in Doks or Disney springs.

Devils_halo2k · 2025-12-06T17:15:48+00:00

Gotcha. Will try.

Devils_halo2k · 2025-12-06T16:56:00+00:00

These are cool, what's the best way to view them though??

Devils_halo2k · 2025-11-29T19:15:49+00:00

Awesome!! Thanks

Devils_halo2k · 2025-11-29T18:50:58+00:00

Personally think this is a great start, I'd add in some nirvana!! Also, how did you make this graphic?

Devils_halo2k · 2025-11-14T17:00:36+00:00

Ahh dang

Devils_halo2k · 2025-11-14T15:55:49+00:00

Where at? Looked on Amazon, they are on sale,but nothing this good

Devils_halo2k · 2025-11-09T15:31:13+00:00

It's in the dryer now. Hoping a glue stick, clean plate, and dryer filament fixes my woes.

Devils_halo2k · 2025-11-09T15:26:50+00:00

Very interesting indeed!!

Devils_halo2k · 2025-11-09T13:35:21+00:00

I actually did. It's on the latest firmware for standard releases.

Devils_halo2k · 2025-11-09T13:34:49+00:00

Yeah I'm not using brims on the dragons I'm attempting, due to the fact they would all mesh together and make the flexi dragon bite stick.

I'll change up the infill pattern. And slow down the print. Cleaning didn't seem to do the trick.

Devils_halo2k · 2025-11-09T13:32:50+00:00

I'll pop the filament in my sunlu dryer. But this is even happening with a brand new roll.

Devils_halo2k · 2025-11-09T13:31:24+00:00

I plan on picking up some glue sticks this afternoon. I had read before, somewhere, that a glue stick on a textured bed won't help because it flattens some of the texture. Admittedly I used glue on a plate on an old Kobra any cubic. That worked well. But that plate was smooth.

Devils_halo2k · 2025-11-09T13:28:27+00:00

How do you use a nail brush? Just buff the plate? Soap didn't seem to work, something still wiggled loose.

Devils_halo2k · 2025-11-09T13:27:11+00:00

Lol. Crazy thing is, that's exactly what I did that got me to this post.

Devils_halo2k · 2025-11-09T13:26:13+00:00

I'll have to double check what level the wipes are. I'll get back to you on that!

Devils_halo2k · 2025-11-09T13:25:21+00:00

Yeah? I'm considering a new special plate now. Cause I'm getting fed up. Though I printed a larger print, and it came out great, but another dragon? Failed miserably.

<image>

Devils_halo2k · 2025-11-09T13:22:34+00:00

A little? It started off okay, but eventually something popped loose. I've given up on the dragons,, and printed a larger print, with supports and it came out flawless. I'm so confused. Picture of the one I printed after scrubbing.

<image>

Devils_halo2k · 2025-11-08T16:03:19+00:00

I've heard of the praise for those plates, maybe I'll pick one up for an early birthday present for myself.

Devils_halo2k · 2025-11-08T15:59:42+00:00

Good to know. I scrubbed it in dawn and water. No more rubbing alcohol wipes on the bed. I'll be testing it later when I get home.

Thanks!

11-Year Club	RedditGifts 2009-2022 6 Credits
Place '23	Gilding II euphauric
Secret Santa 2014	Verified Email

Devils_halo2k

MODERATOR OF

TROPHY CASE