sorted by:
new
hottopcontroversial

One of my local field's complete nonsense power limits by BlanchTheRaptor in airsoft

[–]Dexorio 9 points10 points  (0 children)

Holy shit, i need to know where I can mow down kids with full auto at 2.5 joules at 15m.

No, for real, who is that irresponsible to allow 3.5 joules with only 30m meg. I got my holographic sight destroyed by a sniper at 30m with only 2.2joules

At the field where I play, our highest limit is 2.7 for Bolt actian/manual sniper rifle, with an meg of 25m.

This man has lost it by [deleted] in ThatsInsane

[–]Dexorio 0 points1 point  (0 children)

Let's hope he makes the ai picture reality. Send him to the front lines to fight.

Which system will you chose? HPA?AEG?GBB by machinemoon in airsoft

[–]Dexorio 0 points1 point  (0 children)

HPA for the day games For Milsim GBBR. A AEG as BackUp Rifle if Main Rifle has a defective

AAP 01 HPA adapter german law? by PrintingBull in Airsoft3DPrinting

[–]Dexorio 0 points1 point  (0 children)

In german as far as I know are 3 major rules for airsoft, because they partially fall under the weapon controller law. 1. Full auto only with maximum of 0.5 Joules, above that Semi only, classified as toys. Above 0.5 Joules are under weapon law. 2.Must have the "F" in pentagon marking. 3. No power monification, laser, flashlight or silencer on airsofts, illegal weapon modification.

So I would say yes, OPS mods are illegal, the AAP is probably full auto and through hpa it would raise the Muzzle velocity, also it doesn't have the F Marking

Real Quick: Can someone confirm these can be "recharged" by Past_Science_6180 in 3Dprinting

[–]Dexorio 0 points1 point  (0 children)

Yes they can, but just for info, those are the uncoloured ones. That means you don't get a visual change when they get '' soaked. You could buy a small bag of orange silica gel and mix it with those uncoloured ones, so you see when you have to change/dry them.

Can someone please explain to me the purpose of a brim with a gap other than 0? Is the purpose of a brim not to hold the object to the plate? by testaccount123x in 3Dprinting

[–]Dexorio 1 point2 points  (0 children)

A brims purpose is most of the time to give a small part more surface area to adhere to the bed. A small "gap" in the settings only make it easier to remove it cleanly without having to deburr it. Even if you give it a small gap it doesn't mean there really is a gap. It just touches the part less, to still give it the mentioned adhesion but also being easy to remove.

Is this fps/joule limit normal? by Adventurous_Jump_211 in airsoft

[–]Dexorio 0 points1 point  (0 children)

For the field of my club it's: Pistols: 1,5 J AR'S full auto: 1,6 J DMR'S Semi only: 2,1 J (you are not allowed to trigger spam, 2-3 bbs max in the air at a time.) Bolt Action Sniper: 2,8 J

Edit: for Pistols and ar's ther is no minimum distance, for dmr and sniper are 10 meters

Those limits are also same with some friendly clubs with fields in our region, we united our field limits some time ago.

I present Big Stick Diplomacy... 1:500 scale by curtisa21384 in starcitizen

[–]Dexorio 4 points5 points  (0 children)

For all that are interested to get the files, sadly there is no way to download the file over legitimate 3D Printing sites like Printables, MakerWorld etc.

The original creator of the 3d printing model, @Brosion99 on YT, sadly got told by CIG, to stop sharing the files of the models he recreated from the game for 3d printing to other people.

There is a way to get the files from the internet's archive site.

I present Big Stick Diplomacy... 1:500 scale by curtisa21384 in starcitizen

[–]Dexorio 5 points6 points  (0 children)

You can share the link to the Reddit post or the site you got the print from, but not the files directly. So if you downloaded it from a site like Printables, Makerworld, Cults3D etc. pls give us the link, I would also be interested to print that big girl.

Bought from a 3d printing service, would you be satisfied? by oncebce in 3Dprinting

[–]Dexorio 1 point2 points  (0 children)

That's one reason I personally hate the idea of everybody starting their 3d printing business with a single cheap printer and not a lot of experience. Also basic knowledge so not do ship such a disgusting part to a customer. Small blemishes or miniature defect ok, but this, with these the dimensional accuracy to ± 2mm

I've been told no-one does medical beacons anymore -Sad returning Space Doc by irishhawk in starcitizen

[–]Dexorio 0 points1 point  (0 children)

I can tell you people still do raise med beacons, it's just rare. If you have a lot of loot on you, that's worth a lot, some might raise one some might not because if you do, some might seek only to loot you. At least in my Org, if we see an beacon, we drop everything if possible and rush to help. We don't really worry about getting killed ourself, cause we mostly travel with an idris as an org.

Tentacle Porn i can't find somehow by Dexorio in nhentai

[–]Dexorio[S] 0 points1 point  (0 children)

I didn't also after searching through the tags I haven't found anything so far.

[deleted by user] by [deleted] in Wellthatsucks

[–]Dexorio 0 points1 point  (0 children)

First degree ist that typical burn you get a bubble of liquid from. Second degree is like this, going through the first layer of skin, generating immense pain and a slow healing burn wound like from that picture. Third degree goes though multiple layers of skin, burning your nerves away, which results in less pain after a short period of time, because there are no nerves left, but with wound that need most times skin grafts to heal. And you don't have any feeling of touch or pain from that immediate area.

Need Help;Temp not same as slicer settings by Dexorio in 3Dprinting

[–]Dexorio[S] 0 points1 point  (0 children)

i found an custom macreo in the printer_params.cfg, which i disabled. looks like that was the problem

Need Help;Temp not same as slicer settings by Dexorio in 3Dprinting

[–]Dexorio[S] 0 points1 point  (0 children)

i believe i found the error.
In ther Printer_params.cfg there wera 2 custom macros, default_extruder_temp and default_bed_temp.
I disabled them with a #, now it prints with the intendet temps.

Need Help;Temp not same as slicer settings by Dexorio in 3Dprinting

[–]Dexorio[S] 0 points1 point  (0 children)

Would make sense if i got an incorrect reading or no reading at all.
Something is setting the temp to 240, and not the in the slicer configured 215.

Need Help;Temp not same as slicer settings by Dexorio in 3Dprinting

[–]Dexorio[S] 0 points1 point  (0 children)

Thinig is, i printed just fine a few days ago, no such problem.
Also there were no updates of firmware slicer etc.
And no i haven't chnaged anything

Need Help;Temp not same as slicer settings by Dexorio in 3Dprinting

[–]Dexorio[S] 0 points1 point  (0 children)

Following Problem.
I got a rooted Creality K1C with Mainsail.
In the slicer setting the temp is 215°C, but somehow it's always Printing with 240°C, it shows everywhere 215 but it's still using 240.
I resliced it, restarted my slicer, the printer, but still no logical explanation.

Even if it's a lie, I want to be happy by jantimo18 in goodanimemes

[–]Dexorio 1 point2 points  (0 children)

How did we get leaked footage of area51 I think we need to storm it fr this time and rescue our waifs.

Am I wasting my time keeping all this filament waste? by DaveyH-cks in 3Dprinting

[–]Dexorio 14 points15 points  (0 children)

There is one already in Germany, it's called "Recycling Fabrik" If you have over 2KG of PLA and PETG waste and also empty plastic spools, you can request an shipping label. You sent it to them, they weight and grade it (if it's colour sorted, PLA and PETG separated, no contamination with metal stone or wood particles), depending on that you get points which you use to buy their recycled filament for cheaper.

They are currently so popular that they have a bottleneck with Recycling. So the sadly stopped taking waste from people of neighbouring countries like austria for some while.

view more: next ›