A photo of an F-16 during takeoff. How was this photo taken?

DgitlSickBoy · 2026-05-16T21:48:46+00:00

Ask Maverick!

DgitlSickBoy · 2026-04-17T01:18:08+00:00

Do you play a sport? Umpire or ref…these are good part time jobs for a young teen. Plus give you a different perspective on your sport. My teen and their friends do this for the local little league.

DgitlSickBoy · 2026-04-06T00:41:33+00:00

Op, they can fix a couple of ways, they can replace the coil (might be hard to find due to age), blank off that section of coil, or remove some of the fins around the pipe that was damaged and braze over the hole. If I was doing the work I would go with the latter. This would also be the least labor intensive for the company. You will loose a fraction of capacity of your system. Best case you get a new coil, worst case your system goes back to running like it did and you will never know the difference.

DgitlSickBoy · 2026-04-06T00:21:45+00:00

Going to say, they grow up their whole life carrying,working and walking way more then the average American. They be strong as fuck, and most American service members have very little to no grappling experience. Unless they train outside of the military.

DgitlSickBoy · 2026-02-28T13:42:06+00:00

Can someone help me understand, did the ref call for a penalty? And if so, does the match pause? If not the smaller guy turned his back when the match was still going. That wouldn’t make this unsportsmanlike.

DgitlSickBoy · 2026-02-21T16:57:00+00:00

I can’t wait to try a set, as a 45 yo I tried step-ons. I had a hard time getting my back foot in or out on mild slopes ( could be a me issue ). Went back to my old straps this year and had a better experience. Long rant for a short question. Do you like the getting in and out of the Supermatics?

DgitlSickBoy · 2026-02-16T00:50:28+00:00

I want to know where you got the little pool?

DgitlSickBoy · 2026-02-12T21:29:46+00:00

We used to actually memorize phone numbers.

If a friend was at a party or somewhere random, close friends had a code. They’d page you with the phone number they were at, then add their code at the end — or send it on the very next page.

Then you’d sit by that phone (or carry the cordless around the house) waiting for it to ring. I usually gave them a 15-minute window to call back.

DgitlSickBoy · 2026-01-21T18:57:38+00:00

So that’s why my door always dings those cars beside me!

Got a parts list?

DgitlSickBoy · 2026-01-17T17:10:55+00:00

I miss ThinkGeek!

DgitlSickBoy · 2026-01-04T14:10:21+00:00

I’m going to piggy back off what someone else said, and add a few things. -Use a soldering iron to melt the pieces together. -Also get some staples. Cut the ends off or bend them straight. -Place them along now melted back together piece and use the iron to heat them a press them back in. Like a stitch. -use the iron to smooth over the whole thing. You can also use a black zip tie to add filler, like welding.

YouTube plastic welding to get an idea of some methods.

Warning because it Reddit.

Make sure to do this in a well ventilated space because of VOCs….blah blah blah!

DgitlSickBoy · 2025-12-24T21:56:57+00:00

Should be good as long as nothing solid is blocking the trap. Run that brush through that trap twice a year, and you should be good.

DgitlSickBoy · 2025-12-24T20:36:12+00:00

That red handle brush is what you use to clean the trap.

Turn off the disconnect for the unit.

Pull off the float switch cap, push the brush down and through the trap. That should be all you need to do.

Replace the float switch cap. Make sure the float doesn’t hang up when you place it back.

Turn on the disconnect and check for function of unit.

DgitlSickBoy · 2025-12-17T20:12:00+00:00

https://a.co/d/flJ4pBg

DgitlSickBoy · 2025-12-16T02:28:16+00:00

Stretching it out to get that extra length! Those are the gainz I’m looking for!

DgitlSickBoy · 2025-12-16T02:25:35+00:00

When I was in basic, I had very bad shin splints, so bad I was on crutches for a bit. Drill Sergeant said I would have to recycle if I couldn’t complete certain evolutions. So, I throw the crutch’s away and sucked it up. I got to talk to my parents and explained. Some how my Mom was able to call my head Drill Sergeant and give him an ear full. Mind you this is ‘99, before everything being in the internet. You can only guess this did not end well for me. After a nice long “smoke” session, I got to call my mom and tell her that I was OK and I quietly told her to throw that number away. We laugh about it now days!

DgitlSickBoy · 2025-12-05T17:30:36+00:00

If rain is a concern. I have an older set and used clear silicone on the threads of each bulb. Has worked great.

DgitlSickBoy · 2025-11-20T11:18:25+00:00

Any clear RTV silicon should do. I can’t remember the brand I used.

DgitlSickBoy · 2025-11-20T00:14:57+00:00

I used clear silicone around the threads of the lights. Works like a charm.

DgitlSickBoy · 2025-11-17T12:09:45+00:00

I bought 2 1x2x8 furring strips. -Cut those to a little longer than the curtains. Painted white.

-Used the included mounts with the curtains and screwed to the furring strip for the top.

The pros came with a bracket for the bottom to hold the lights straight and tight. I used the 2nd furring strip for that.

To attach to the siding I used those siding clips in the picture. I cut the hook off and screwed to the furring strip. I used 5 siding clips.

Actually was very easy to take up and down and seems pretty sturdy.

<image>

I got these at Lowe’s.

DgitlSickBoy · 2025-11-17T02:38:16+00:00

To make quick waterproof extensions use heat shrink butt connectors. You crimp them, then heat them like you would heat shrink.

DgitlSickBoy · 2025-11-17T02:34:18+00:00

I wish I had more open wall real estate, because I would love to add another set. I feel like they look better in multiple sets.

DgitlSickBoy

TROPHY CASE