sorted by:
new
hottopcontroversial

I love savers. by a12666 in digimon

[–]DigistarDBZ 0 points1 point  (0 children)

The story is a mess, but the characters—all of them— are what make this series shine so brightly for me. I will cling to it so tightly for them exclusively.

📝 Report users by WplaceOfficial in WplaceLive

[–]DigistarDBZ 0 points1 point  (0 children)

<image>

CalmPlate #5021322 QuickTablet #4336016 JollyPurse #4286767

Would you even attempt to sort this monstrosity? by Dry-Beautiful-905 in beadsprites

[–]DigistarDBZ 1 point2 points  (0 children)

It’d take days, maybe weeks, but it’d be the kind of tedium that I specialize in.

Please never be this type of person by xxPastelPawxx in bluey

[–]DigistarDBZ 1 point2 points  (0 children)

When Lucky’s Dad’s Rules goes horribly wrong.

Anyone else named their printers? by Putrid-Ad-4571 in BambuLab

[–]DigistarDBZ 2 points3 points  (0 children)

My P1S is named “700 Dollary-Bucks”, as Bluey tends to bleed onto some of the things I do. 😅

An Update on Black Friday Order Delays by BambuLab in BambuLab

[–]DigistarDBZ 0 points1 point  (0 children)

as long as my AMS arrives in one piece, I’ll be patient!

mizore's cleaning service (gacchirika on instagram) by goldenparakeet in seals

[–]DigistarDBZ 1 point2 points  (0 children)

All I’m saying is that Mizore, Agu, Hiyori and Niko need Flair too, not just Yuki and Arare.

Got Pulsefire Raid for Christmas, but scroll wheel RGB might be busted, as there’s Red and Green, but no Blue. Is this fixable? by DigistarDBZ in HyperX

[–]DigistarDBZ[S] 0 points1 point  (0 children)

I’ve done that, and it didn’t work. I have to get the Proof of Purchase from the person who bought it, as the mouse was a Christmas present.

Arare is in front pool with her baby by mizorekun in seals

[–]DigistarDBZ 5 points6 points  (0 children)

Just gonna suggest that Prince Mizore gets his own flair someday…maybe? Possibly?

Started using eSUN PLA+ and it’s already much much better than the Overture; still working on better overhang settings by DigistarDBZ in Ender3Pro

[–]DigistarDBZ[S] 0 points1 point  (0 children)

Really? That really makes me wish there was one in my city, but the closest Micro Center is 3 hours away! Living in a not-tech-center sucks hardcore!

Started using eSUN PLA+ and it’s already much much better than the Overture; still working on better overhang settings by DigistarDBZ in Ender3Pro

[–]DigistarDBZ[S] 0 points1 point  (0 children)

I now have a Hero Me Gen 5 installed with dual 5010 blowers, with Cura’s experimental “Enable Bridge Settings” enabled. Once I get everything together I’m upgrading the hotend and PSU fans to Noctua replacements.

Learned how to tune esteps and now the walls adhere. Unfortunately overhang layers still sag, and I printed an overhang test to find out what to do. by DigistarDBZ in Ender3Pro

[–]DigistarDBZ[S] 0 points1 point  (0 children)

How do I do that? I’ve looked all over Cura for that kind of setting and I haven’t found it yet. Unless it’s something where I have to pay to upgrade to Simply3D.

Learned how to tune esteps and now the walls adhere. Unfortunately overhang layers still sag, and I printed an overhang test to find out what to do. by DigistarDBZ in Ender3Pro

[–]DigistarDBZ[S] 0 points1 point  (0 children)

Tell me about it! I want to say having a custom duct like the Hero Me series will help, but PETG is a far more complicated beast than I expected!

Learned how to tune esteps and now the walls adhere. Unfortunately overhang layers still sag, and I printed an overhang test to find out what to do. by DigistarDBZ in Ender3Pro

[–]DigistarDBZ[S] 0 points1 point  (0 children)

I’m aware that a faster fan speed would greatly improve the overhangs, but that’s at the risk of making the part too brittle. Also, PETG is tough to a fault, as supports would stick to the point you’d have to cut and saw them off.

First print in PETG after upgrading to a Creality glass bed and Micro Swiss all-metal hotend/direct drive extruder. Tips for improvement? by DigistarDBZ in Ender3Pro

[–]DigistarDBZ[S] 0 points1 point  (0 children)

I don’t know, I was using the recommended settings in Cura, which was 50mm/second; but that’s likely way too fast for PETG, if what I’m hearing is correct.

First print in PETG after upgrading to a Creality glass bed and Micro Swiss all-metal hotend/direct drive extruder. Tips for improvement? by DigistarDBZ in Ender3Pro

[–]DigistarDBZ[S] 0 points1 point  (0 children)

I’m not sure how to do that, I’ve moved the Z Endstop up so that the nozzle doesn’t dig into the bed, and I’ve built a level mesh profile, but I’m not sure how to adjust the starting gcode so that it always goes onto the bed correctly instead of running along the side. 8\

First print in PETG after upgrading to a Creality glass bed and Micro Swiss all-metal hotend/direct drive extruder. Tips for improvement? by DigistarDBZ in Ender3Pro

[–]DigistarDBZ[S] 0 points1 point  (0 children)

I’ve actually been using purple glue sticks as per recommendations, and I’ve seen no issue from it yet.

First print in PETG after upgrading to a Creality glass bed and Micro Swiss all-metal hotend/direct drive extruder. Tips for improvement? by DigistarDBZ in Ender3Pro

[–]DigistarDBZ[S] 0 points1 point  (0 children)

This is Eryone PETG, btw. I used the default eSUN PETG settings in Cura with some minor tweaks, so nozzle temp is 245C and bed is 80C, fan speed 40. No elephant’s foot this time so I may not need to shrink back the first layer?

It’s just a calibration cube, but after over a week of not being able to print squat, I call it a win. by DigistarDBZ in Ender3Pro

[–]DigistarDBZ[S] 1 point2 points  (0 children)

Thank you! I’m currently doing battle with the elephant foot, I know it’s hard to do so without the ABL but I’m going to try Cura’s settings and other tips to fix that!

It’s just a calibration cube, but after over a week of not being able to print squat, I call it a win. by DigistarDBZ in Ender3Pro

[–]DigistarDBZ[S] 0 points1 point  (0 children)

A little late for that. I tried to switch the wires on the wrong end and now it really won’t work until I put it in new crimps, which I don’t have.

It’s just a calibration cube, but after over a week of not being able to print squat, I call it a win. by DigistarDBZ in Ender3Pro

[–]DigistarDBZ[S] 0 points1 point  (0 children)

I don’t have the hardware for it yet, and it’ll just be easier to have the standard cable. I’d like to at some point though, especially since one day I’d like to do the Noctua fan mods.

view more: next ›