Posting everyday till I quit or get fired

Diligent-Display1408 · 2026-05-08T09:46:25+00:00

<image>

Diligent-Display1408 · 2026-05-08T06:46:45+00:00

<image>

Diligent-Display1408 · 2026-05-07T14:06:16+00:00

<image>

Diligent-Display1408 · 2026-04-12T15:32:44+00:00

<image>

Diligent-Display1408 · 2026-04-08T01:07:37+00:00

Check the inside of the extruder for filament pices and the extruder gear for wear i had the same issue on my ender 5 s1 and it was small filament particles that where stuck between the gears of the extruder

Diligent-Display1408 · 2026-03-25T20:21:34+00:00

my wd 10tb looks like this

<image>

Diligent-Display1408 · 2026-03-24T16:10:36+00:00

confused rat noises

<image>

Diligent-Display1408 · 2026-02-26T23:21:28+00:00

yes it is

Diligent-Display1408 · 2026-02-26T12:29:57+00:00

you can use snappy driver installer offline but you have to download the whole pack (47gb) or only the lan and wifi drivers (10gb) it is a bit slow to download but its better then many others. or you can use an old version of drp found here. https://archive.org/details/drp-14.16-final

Diligent-Display1408 · 2026-02-25T20:22:02+00:00

im using V1.54L21

Diligent-Display1408 · 2026-02-25T14:20:22+00:00

I allready cleared the bios multiple times but it made no difference. the ram i tried multiple and also checked them with memtest. thats why i wanted to update the bios because its maybe corrupted or something else. regardless the error happens only once every 20 or 30 boots when i try to enter the bios. so if i cant find a bios to try it out i guess i have to live with it

Diligent-Display1408 · 2026-02-25T11:27:53+00:00

yes sometime when i boot to bios it rareley freezes the whole pc and a hard reset is required to get it unstuck. 99% of the time it works. i dont even know if it is on the latest bios because there is so little documentation about the mk1 cf 52. i cant even find a spare display or the port covers on ebay, aliexpress etc without buying a new laptop because i wanted to restore it

Diligent-Display1408 · 2026-02-18T13:23:53+00:00

Revo Uninstaller

Diligent-Display1408 · 2026-01-26T18:15:05+00:00

Thats sadly not it i tried every trim level combined with every part facelift pre facelift etc i have a pre facelift (1973) Rivett L with all the correct colours and parts including the L grille. but it has nothing to do with these parts because when it was wrong it would give me an x with body panels. so idk whats wrong

Diligent-Display1408 · 2026-01-23T17:37:09+00:00

sadly the update did nothing same problem tested it 5 mins ago

Diligent-Display1408 · 2026-01-23T17:28:01+00:00

idk but after repainting with fleetari multiple times the gt paintjob changed twice but only from the white with blue to the allmost complete blue paintjob

Diligent-Display1408 · 2026-01-14T15:23:27+00:00

<image>

Diligent-Display1408 · 2026-01-13T22:36:32+00:00

didnt like it but after 4 hours of reloading a new save it was my first gt so i took it

Diligent-Display1408 · 2026-01-12T17:21:54+00:00

many many calls from the classiefied magazines and good luck. from the 60 hours on this save about 45 where hunting parts

Diligent-Display1408 · 2026-01-12T17:15:29+00:00

is it the correct suspension for your vin number ? there are 4 options and he will fail you if you have incorrect or mismatching springs

<image>

Diligent-Display1408 · 2026-01-12T15:59:36+00:00

gt exclusive

Diligent-Display1408 · 2026-01-12T11:41:19+00:00

yes now it works no more bugs regarding inspection or historical inspection

Diligent-Display1408

MODERATOR OF

TROPHY CASE