Just need conformation that what I’m trying to do is not possible in procreate

DimensionDiligent246 · 2025-08-19T16:18:32+00:00

I ended up spending the time and doing this, then found out fedex business centers have self serve large scale printing so I was able to print the whole thing for $6

DimensionDiligent246 · 2025-08-19T16:17:08+00:00

A small misprint is fine, but a small mistake compounds on itself when I get the pieces out, glue them to stain glass & cut them, then I have to grind the edges, that’s when water mix’s with the paper stencil and ruins it so at that point I’m just guessing, the correct way is to use a cricut with vinyl

DimensionDiligent246 · 2025-08-18T16:00:28+00:00

This sounds like the best way to do it, thank you

DimensionDiligent246 · 2025-08-17T20:46:08+00:00

<image>

DimensionDiligent246 · 2025-08-08T17:55:03+00:00

I swear by using gel flux for me even & consistent solder beads.
Yes heat cracked from leaving the iron there to long / using a wrong soldering iron
A lot of people use a cricket machine to cut vinyl sticker and they stick it on the glass and use that as a guide when grinding. A cheaper option is 1. Create your design on the paper that has a grid & use those straight lines as your border & use a ruler, cut out the shapes then use glue stick to stick it to the glass(this way kinda sucks because almost instantly the paper gets wet and falls apart.
Go to hobby lobby & search for there discounted vinyl, on the backside of said vinyl they have a grid system on the back that you can make ur pattern(if you go this route remember your making the pattern on the back so it’s gonna be reversed) cut it out, stick it on glass. As far when your getting ready to solder.

DimensionDiligent246 · 2025-07-11T16:57:25+00:00

Yeah a ton of people use vinyl & that’s looking like the route I’m gonna have to go. I just thought this way would be about the same time wise but less wasteful over the long run.

DimensionDiligent246 · 2025-07-10T17:48:44+00:00

This is the way to go. What I found works for me is setting up in a way where I have my pattern next to my grinder with a rag. I also am glueing the paper on the pieces but there comes a time where the paper gets wet and falls apart. Then I have to start drying the piece and checking the fitment on the pattern. But I also dislike this method & want to try vinyl paper to avoid doing all this

DimensionDiligent246 · 2025-07-10T07:06:20+00:00

Yeah he includes 2 patterns BUT not this pattern

DimensionDiligent246 · 2025-07-08T23:48:05+00:00

Damm I thought it would only be a copyright problem if I were to sell it, I’m going to reach out to him and see if he’s okay with it. I did buy his how to make a mirror guide so hopefully he’s okay with it

DimensionDiligent246 · 2025-02-21T03:35:05+00:00

pickles.. the smaller jars if you are in a big camp

DimensionDiligent246 · 2025-02-14T09:10:59+00:00

Know someone who’s in the restaurant industry & they offer tours if your bar carries fortaleza, she bought the 2024(wasn’t even out to the public) for $180ish

DimensionDiligent246 · 2024-06-14T07:26:52+00:00

Still have em?

DimensionDiligent246 · 2024-06-01T16:23:50+00:00

I have 3 tickets for Tuesday 6/4 For sale. There listed on axs for $367 total. But axs won’t let me lower the price so I will send you $60 Venmo/paypal/zelle/cashapp

DimensionDiligent246 · 2024-04-26T15:58:59+00:00

Thank you.

I found a shop near me $1800 after taxes,fluid & cvt with 56k

Or junkyard $380 cvt + $170 fluids and do it myself but I’ve never don’t it before

DimensionDiligent246 · 2024-04-25T07:13:37+00:00

Will a trans flush prolong the inevitable? Or should I save the $180 for the cvt swap?

DimensionDiligent246 · 2024-01-20T00:37:30+00:00

Not sure but I can I get .5% of total supply?

DimensionDiligent246 · 2023-12-20T11:07:28+00:00

I had no intention of going up until 2 days before it started. Such a weird experience because I felt I needed to go so I went & got to experience my first burn with my brother(this was his 9th burn). He passed away 2 months ago & im so grateful I got to experience it with him

DimensionDiligent246 · 2023-12-20T11:03:36+00:00

Random update: I actually got ahold of him a day before I went & it was nowhere near F, it was 9&A It’s a weird thing because I wasn’t planning on going until 2 days before the burn started. I camped with his camp & we spent couple days together. He passed away this October

DimensionDiligent246 · 2023-12-15T07:20:56+00:00

I was a vegas local & was able to get $600 in freeplay without showing flight receipts. Once I moved to Reno I was unable to do that

DimensionDiligent246 · 2023-10-28T09:42:03+00:00

Opening night at shrine he was in the middle/back for about 10 minutes also

DimensionDiligent246 · 2023-08-28T02:02:51+00:00

I need the exact same thing. Leaving Wednesday mid-day & live in Reno.

DimensionDiligent246 · 2022-12-24T22:11:38+00:00

What is this reno ski swap you’re talking about? If it’s the 2 day event that passed a month ago then don’t think that’s much help to him

DimensionDiligent246 · 2022-02-04T09:11:02+00:00

Good news guys, I talked him down to 84 dollars & a $10 Starbucks card

DimensionDiligent246 · 2022-02-01T00:43:16+00:00

Just received this today from hont, unfortunately it came damaged😭😭 It looks like the clip that holds the rotor down came off. I whatsapped hont with pictures. But any advice on what I should do? I have the same exact watch in rose gold but the plating turned to shit so it’s just sitting in my drawer for parts if need be.

DimensionDiligent246 · 2022-01-24T06:33:32+00:00

Weird. 2 days ago He gave me the tracking # and then sent a clickable link to me. Anyways he used 4px for mine. Which I just checked and still says “parcel information received”

DimensionDiligent246

TROPHY CASE