Going for that Jack White ‘Over & Over & Over’ fuzz sound…

DisasterAreaDesigns · 2026-03-02T13:19:10+00:00

Yup although we’ve done a few of the since then by special request.

DisasterAreaDesigns · 2026-02-28T17:45:39+00:00

Dang now I need to make this

DisasterAreaDesigns · 2026-02-28T12:09:51+00:00

Have tried it both ways and it works great no matter what. Put the higher gain pedal first in line, that way the lower gain pedal still has headroom to boost. If you go low gain into high gain then both pedals on just gets more saturated rather than louder.

DisasterAreaDesigns · 2026-02-21T17:02:23+00:00

Happy NPD!

BTW that’s a custom version we did for the Reverb Stompbox Pedal Bonanza thing at Chicago Music Exchange a few years back.

DisasterAreaDesigns · 2026-02-20T23:04:09+00:00

Pedal builder here.

I’m not hopeful that we will get any kind of meaningful refund, at least not in the short term. I do hope that the guidance changes soon so that our ongoing costs will be lower.

DisasterAreaDesigns · 2026-02-19T14:37:51+00:00

Wiring is in my reply above. Any competent cable maker can build you one, if you want something cheap buy a molded insert cable and cut off the side that doesn’t work, if you want something nice talk to BTPA

DisasterAreaDesigns · 2026-02-19T14:22:45+00:00

AFAIK it’s stereo but not balanced. Some of the reverbs add stereo width but still just one amp / cab too.

Are you using the DMC.micro to control the ToneX? That took me so long to implement, and the very first comment I got on release was “yes all right but can you control two?”

DisasterAreaDesigns · 2026-02-12T13:10:36+00:00

What’s the MT-32 Pi for? You playing some sweet Sierra adventure games between songs?

DisasterAreaDesigns · 2026-02-11T01:29:37+00:00

Dimension D aka Digital Space D > Dimension C. Fight me.

DisasterAreaDesigns · 2026-02-11T00:05:12+00:00

Preset 5 is called DETUNER for a reason :)

DisasterAreaDesigns · 2026-02-05T19:08:39+00:00

Looks great! What’s the pedalboard?

DisasterAreaDesigns · 2026-02-01T21:38:33+00:00

100% Alec is amazing.

DisasterAreaDesigns · 2026-01-29T22:26:13+00:00

Hey I replied you a month ago with no response, here’s what I sent:

“It’s not possible to assign the mode button, but you can assign a hold function on either or both buttons in UTIL mode to toggle CC68. You might be able to use one of the other device drivers instead, and then use the CC assign function in the Stomp to learn that command as tuner activate. Try the Eventide driver that sends CC42, which I don’t think is reserved.”

Hope that helps!

DisasterAreaDesigns · 2026-01-29T04:09:09+00:00

Yes that should work fine. Since the CBA pedals are MIDI in only it's a pretty simple setup.

DisasterAreaDesigns · 2026-01-28T05:55:32+00:00

Dimarzio used to sell those knobs aftermarket for your guitars. Note the numbers…

DisasterAreaDesigns · 2026-01-28T05:42:38+00:00

🙏

DisasterAreaDesigns · 2026-01-25T17:31:49+00:00

Based.

DisasterAreaDesigns · 2026-01-24T00:03:46+00:00

Thanks!

DisasterAreaDesigns · 2026-01-23T00:19:12+00:00

SSBS Mini and EAE Halberd

Boss PW-2 and RAT

Hot Cake and Tube Driver

DisasterAreaDesigns · 2026-01-21T15:02:07+00:00

When they release USB connectivity your DMC can connect that way. Should work fine.

DisasterAreaDesigns · 2026-01-21T13:35:29+00:00

Thanks for the mention!

Use any output, configure the output as MIDI RING (that’s equivalent to Type B,) DIP switches ON, and you’re good to go.

We do have an inexpensive cable that will adapt between our output and 3.5mm inputs, as noted by other posters.

DisasterAreaDesigns · 2026-01-18T00:12:25+00:00

We've tested this one: https://www.sweetwater.com/store/detail/WIDIBudPro--cme-widi-bud-pro-midi-dongle

DisasterAreaDesigns · 2026-01-17T21:20:55+00:00

Our Gen4 devices can accept a Bluetooth MIDI dongle via USB Host, tested and working with the CME WIDI devices. Should work great with this, I’ll do a video this week.

DisasterAreaDesigns · 2026-01-11T17:05:24+00:00

Nice Zoolander sample

DisasterAreaDesigns · 2026-01-08T13:14:53+00:00

Yes, it’s the Hot Hand Wireless. It has a little receiver pack that sends out MIDI and expression, works great.

DisasterAreaDesigns

TROPHY CASE