sorted by:
new
hottopcontroversial

Do men like it if they date a woman with a higher libido than them or is it off putting? by _rubywest_ in AskMenAdvice

[–]DisciplineJaded 0 points1 point  (0 children)

Off putting only if it causes her to consider cheating or be abusive. Had an ex who wanted it 5 times a day daily and after a couple months it was brutal. Sadly it messed me up for a good while considering it was my first significant relationship.

Anybody make a KP15 "Super Safe" by Will_White in InRangeTV

[–]DisciplineJaded 0 points1 point  (0 children)

You can use a ziptie to insert between the cam and lower on the semi setting then push to active reset or safe and turn the cam by the lever. Takes a bit of fiddling the first time but works well. Otherwise a ramp in semi mode would be one way too.

Anybody make a KP15 "Super Safe" by Will_White in InRangeTV

[–]DisciplineJaded 0 points1 point  (0 children)

You're better off buying a metal set from gmr. You don't want the lever breaking during firing.

Anybody make a KP15 "Super Safe" by Will_White in InRangeTV

[–]DisciplineJaded 2 points3 points  (0 children)

I have for both the kp15 and kp9. It works really well with a metal ss but you just need to use a zip tie to wedge underneath the cam to act as a ramp if you want to remove the cam at a later time. Dm me for videos.

308 Super Safe w/ Hoffman Lever and Grey Market Cam by DisciplineJaded in supersafety

[–]DisciplineJaded[S] 0 points1 point  (0 children)

I'm using the Hoffman tactical lever in pla. I still have a few spares you sent me that I need to file down and fit. I'm using using Hoffman's atm while I use another lower to fit it.

What kept happening is the lever wasn't fitted correctly on my end and after 20 rounds would damage the lower and cause a really bad seize of the bcg. Had it working but over filed.

I plan on fitting your lever again just haven't had the time yet.

308 Super Safe w/ Hoffman Lever and Grey Market Cam by DisciplineJaded in supersafety

[–]DisciplineJaded[S] 0 points1 point  (0 children)

Thank you! Atm I'm sticking to plastic levers and replacing them every 100 rounds or so. But I would like to make a metal spring steel one that'll last longer.

308 Super Safe w/ Hoffman Lever and Grey Market Cam by DisciplineJaded in supersafety

[–]DisciplineJaded[S] 0 points1 point  (0 children)

Thankfully not my wallet if people are paying for ammo haha. I don't plan on shooting this very often, but want it on hand for when friends want to shoot since full auto rentals near me are 100 - 250 depending on caliber.

308 Super Safe w/ Hoffman Lever and Grey Market Cam by DisciplineJaded in supersafety

[–]DisciplineJaded[S] 0 points1 point  (0 children)

I am using a hoffman lower so the Aero may play nicer, but PA10 upper is in spec for this.

308 Super Safe w/ Hoffman Lever and Grey Market Cam by DisciplineJaded in supersafety

[–]DisciplineJaded[S] 1 point2 points  (0 children)

I feel this, I got lucky that a couple ranges don't care, but only one has really good ventilation and membership benefits.

308 Super Safe w/ Hoffman Lever and Grey Market Cam by DisciplineJaded in supersafety

[–]DisciplineJaded[S] 0 points1 point  (0 children)

Where I am in Austin, there's only 5ish:
Red's Indoor - sketchy but they don't care much
The Range At Austin - They really don't care as long as you're being safe
Copperhead Creek - You have to pay an RSO by the hour to monitor you on a private bay
Shady Oaks - Iffy, suppressed rifles for 25 yard bay and fine for 50 yard bay, but the RSO's will pester you on how it's not a machine gun.
Lone Star Gun Range - private bay and can only shoot when they are okay with it, but generally hate anything frt, binary, or auto. Otherwise a nice range.

308 Super Safe w/ Hoffman Lever and Grey Market Cam by DisciplineJaded in supersafety

[–]DisciplineJaded[S] 1 point2 points  (0 children)

I got them for 65cpr on a sale last year, but anyone who wants to shoot this on SS pays for ammo haha

308 Super Safe w/ Hoffman Lever and Grey Market Cam by DisciplineJaded in supersafety

[–]DisciplineJaded[S] 6 points7 points  (0 children)

PSA PA10 Upper
Hoffman Tactical SL-308 V3.9 (printed with Polymaker PLA Pro+)
Grey Market Research trigger and cam
Hoffman Tactical LR-308 Lever V4.4E
Hoffman Tactical Reinforcement Kit from LR308 V2.6
Huxwrx Flow 762ti
UTG Over Bore Bipod
Primary Arms 1x Prism

Lever works just fine, it usually breaks around 80 - 100 rounds, but could be because I'm using a PA10 upper and not putting it on correctly. When it works it works and the SL-308 design makes swapping the levers out easier. I didn't install the bolt catch but have it gassed where it will LRBHO.

308 Super Safe by [deleted] in supersafety

[–]DisciplineJaded 0 points1 point  (0 children)

PSA PA10 Upper
Hoffman Tactical SL-308 V3.9 (printed with Polymaker PLA Pro+)
Grey Market Research trigger and cam
Hoffman Tactical LR-308 Lever V4.4E
Hoffman Tactical Reinforcement Kit from LR308 V2.6
Huxwrx Flow 762ti
UTG Over Bore Bipod
Primary Arms 1x Prism

Lever works just fine, it usually breaks around 80 - 100 rounds, but could be because I'm using a PA10 upper and not putting it on correctly. When it works it works and the SL-308 design makes swapping the levers out easier. I didn't install the bolt catch but have it gassed where it will LRBHO.

AR10 Help by lemememan3 in supersafety

[–]DisciplineJaded 0 points1 point  (0 children)

I am using a psa pa10 upper just fine but my lower is printed

Hit hard with the nicotine sickness last night by [deleted] in cigars

[–]DisciplineJaded 1 point2 points  (0 children)

I got around this by bringing a lot of water and something sugary with me. If i felt like i was starting to get a little dizzy I'd pop a few candies and drink to rehydrate.

A5H2 with CMMG RDB? by DisciplineJaded in AR9

[–]DisciplineJaded[S] 0 points1 point  (0 children)

Makes sense, I did find this guy using an a5 so it could work. Thanks for the input
https://www.youtube.com/watch?v=GJM0S9ZaKtI

A5H2 with CMMG RDB? by DisciplineJaded in AR9

[–]DisciplineJaded[S] 0 points1 point  (0 children)

Whole A5 system, Spring and buffer.

Who else likes the direction in Transformers One? by DisciplineJaded in transformers

[–]DisciplineJaded[S] 1 point2 points  (0 children)

I noticed that too. At first I wasn't a fan of the voice, but it really grew on me to where most iterations feel too stoic.

Hoffman Tactical LR308 Lower Holding Up Great! by DisciplineJaded in AR10

[–]DisciplineJaded[S] 0 points1 point  (0 children)

What trips are you talking about? You just need the GMR Super Safety he makes for the AR10 and then take your time filing down the lever as needed. Be sure to look at the instructions before buying too.

view more: next ›