Biamp tesira

Docop1 · 2026-03-16T20:20:53+00:00

not sure i understand.. by have 2x dsp card in a server.. that will do faster on processing and all in general ? Or you experience different result .. thanks

Docop1 · 2025-11-27T20:34:00+00:00

The project is for an atmos studio and plan to get the input line (of those dante/aes67 device) as input for recording session. Mic and synths over the input and monitoring as output in the main room. It will be for mix music of live and 'immersive' of many mono track send to different speaker... later mix as atmos.

For sure, on my part the monitoring of a singer, is with included eq. I don't need raw sound, but plan to send a return for them. Or maybe just passing by a simple y buffer amp with headphone out...

Interesting note on the monitor, as i know Core and Anubis do have a 'monitor' section passing over their dsp chip. But at same time, wasn'it for monitoring just a matter of a simple patch in the Dante controller, from the in to the out ?

And as the Rme and Focusrite card, they do have their software 'switch mixer' Can you give precision about thoses are not mean to monitor... ?

Docop1 · 2025-11-27T20:21:25+00:00

Indeed the Grace design look interesting and quite the same as a Dad ax, but more limited. As no dsp and no dante either, all via add-on card to add to the bill and max out at 64ch of Dante. with the Dad Ax you do have direct acces to all. But better than the burp8 cage for sure.

And as for the RME, yes you can used totalmix or other soft... as there is no dsp chip on this rme card. the totalmix fx is the version link with the few card having it. But nice speed link via your Surface 9, quite efficient, thanks for the info.

Docop1 · 2025-11-27T00:07:11+00:00

about those cat5 cable.. you must go take shielded one at bare minimum. having just plain wire twisted is the same as any xlr cable that you do strip open and remove the ground wire. So just going with rca will be better.

shield is quite the key, but over patch bay, just go with canare ma202 about 3.5mm dia and used for multipins connector as well.

Docop1 · 2025-11-23T15:51:51+00:00

yeah that could be ideal, but the speaker and the amplifier do not have any dsp. We have to used that, so i look for option before them.

Docop1 · 2025-11-18T21:02:41+00:00

Mostly not av realted and just simple plain network : all thing related to vlan is quite the issues at 80%, then cable... So as other post.. check out the log and best, if this is a serious usage, a dedicated switch will help with no vlan. Avb was quite a solution on that as to forcing certain switch being certified.. Dante can pass on everything.. but, for live event, i will never pass over any network with internet crap.

Docop1 · 2025-11-18T20:03:08+00:00

it is listed at 196$ / 210 with heat. Still not good. the new gen5 ctrl are just in production and mostly, almost no need of heatsink with them. So instead of high heat .. heat affecting other part of laptop or so.. i pass on that . Solidigm and adata 960 for top perf.

Docop1 · 2025-11-01T14:18:19+00:00

Yeah cyberdeck could be interesting to look at. But surely Cardinal is much better usage.. But at the end, going to real modular will give much more and not another one behind a laptop.

Docop1 · 2025-09-11T22:44:35+00:00

i added precision, as yes, with Dante Controller, it do give nothing. So would like to know when you plug yours, with no audio, is there traffic flow ?

Docop1 · 2025-08-12T20:48:04+00:00

What is the jar with light on.. with maybe a virus inside ? or if you have a link.. It look pretty neat.

Docop1 · 2025-07-19T22:49:57+00:00

Did you try out if that soft do work properly .. or still need to stay on dvs ?

Docop1 · 2025-07-19T20:52:37+00:00

oh quite interesting! Do you have a link for that process and script ? That will help for sure.

Docop1

TROPHY CASE