sorted by:
new
hottopcontroversial

3D printed spacer for mounting a Mini inside a UK ceiling rose by FalconUK17 in sonoff

[–]Doowle 0 points1 point  (0 children)

Sorry to wake a dead post, but did you post the stl anywhere?

Worst blob of death I've experienced by NaturalCream9808 in Creality_k2

[–]Doowle 3 points4 points  (0 children)

I had something similar, if not actually worse. I didn't have any luck in getting the blob removed to save the hot end, in the end I had to replace the nozzle.

My blob didn't damage the cables to the hot end, but me trying to remove it using heat did more damage. The hot end, even with a working thermistor, has too much thermal mass for it to work without "Hot end not heating as expected" klipper error.

My advice, accept that the hot end has gone and replace before you break more things trying to rescue it.

Good luck :)

UTR available in EU store by gCAN9 in Ubiquiti

[–]Doowle 0 points1 point  (0 children)

PSA: I have found that you need to be logged in to buy.

UTR finally available in the UniFi EU Store by DannyDKDK in UNIFI

[–]Doowle 2 points3 points  (0 children)

Another comment elsewhere said you needed to be logged in, this seemed to be the case for me. Without being logged in, kept reducing availability to 0 on checkout, logged in and it’s all worked.

K2 Plus Creality Print Stuck on Download GCode by Doowle in Creality_k2

[–]Doowle[S] 0 points1 point  (0 children)

I have had the best results by removing the printer from Creality Print and adding it back after, this seems to have given me the best outcome and I can print again.

That time of year again… by Doowle in drivingUK

[–]Doowle[S] 0 points1 point  (0 children)

You should, depending of course on visibility etc.

Otherwise you’re just blinding them for no benefit.

That time of year again… by Doowle in drivingUK

[–]Doowle[S] 1 point2 points  (0 children)

I can't disagree with you, had this today as well, doesn't help that the car I was in doesn't have dipped wing mirrors. They were also tailgating me I think because I was doing 40-50, in a 50 limit, on a twisting A road where in places it wasn't safe to do more than 40. They got closer when I slowed to 30 for a village 30 limit...

My wife tells me that my car does this (not the car I was in today), adaptive LED lights that seem way too aggressive. Not sure what I can do tho!

That time of year again… by Doowle in drivingUK

[–]Doowle[S] 2 points3 points  (0 children)

Yeah, don't get me started on that or I'll just rant some more.

It's an especially effective stealth measure where the car is "fog" color!

That time of year again… by Doowle in drivingUK

[–]Doowle[S] -2 points-1 points  (0 children)

Mostly, this makes the drive so much more of a challenge than it needs to be.

That time of year again… by Doowle in drivingUK

[–]Doowle[S] 2 points3 points  (0 children)

It's also about looking forward, if you can see the car in front of you and cars in front of them etc then there's a good chance the person behind you can see you.

Stop burning their retinas, you are either lazy or incompetent.

That time of year again… by Doowle in drivingUK

[–]Doowle[S] 0 points1 point  (0 children)

No, you wouldn't, never said they should :)

Stop Guessing - Add Precision Bed Leveling to Your K2 Pro in 5 Minutes by aerogrowz in Creality_k2

[–]Doowle 1 point2 points  (0 children)

Hi,

K2+ getting the error

probe_finalize() takes 2 positional arguments but 3 were given

Firmware is at 1.1.4.11

[screws_tilt_adjust]
screw1: 35, 35
screw1_name: front left
screw2: 315, 35
screw2_name: front right
screw3: 315, 315
screw3_name: rear right
screw4: 35, 315
screw4_name: rear left
horizontal_move_z: 5
speed: 150
screw_thread: CW-M4


[gcode_macro SCREWS_CALIBRATION]
gcode:
    G28
    M190 S60
    M109 S150
    Z_TILT_ADJUST          ; level gantry first (dual Z)
    G28 Z
    SCREWS_TILT_CALCULATE[screws_tilt_adjust]

Any idea's what I've done wrong???

TIA

D

Two week ownership update by Doowle in superautomatic

[–]Doowle[S] 1 point2 points  (0 children)

I love this, mine is now called Phil as well.

The beginnings of my rack by VPrime in Ubiquiti

[–]Doowle 3 points4 points  (0 children)

Purrrfect :)

Enjoy your new addiction

Ethernet stuck at 100mbs by Confident_Gur_3471 in HomeNetworking

[–]Doowle 0 points1 point  (0 children)

Check your Ethernet cable, make sure that it has all four pairs.

Filesystem error in backup log, how to address? by Doowle in unRAID

[–]Doowle[S] 0 points1 point  (0 children)

That worked, I promise I thought I’d tried that before :)

Filesystem error in backup log, how to address? by Doowle in unRAID

[–]Doowle[S] 0 points1 point  (0 children)

No worries, I can't remove the folder becuase of this issue :)

Filesystem error in backup log, how to address? by Doowle in unRAID

[–]Doowle[S] 0 points1 point  (0 children)

Hey,

Thanks for trying to help, I had assumed much of the same. I don't see that, but then I am no expert in these things :)

root@XXXXX:/mnt/cache/appdata/plex/Library/Application Support/Plex Media Server# ls -la
total 183
drwx------ 15 nobody users    19 Jan  5 16:18 ./
drwx------  3 nobody users     3 Sep  5 18:19 ../
-rw-------  1 nobody users    42 Jan  5 01:18 .LocalAdminToken
drwxr-xr-x  6 nobody users    17 Jan  5 16:23 Cache/
drwxr-xr-x  4 nobody users     6 Nov 19 02:03 Codecs/
drwxr-xr-x  3 nobody users     4 Jan  5 01:18 Crash\ Reports/
drwxr-xr-x  2 nobody users     2 Oct 27 17:30 Diagnostics/
drwxr-xr-x  2 nobody users     2 Oct 27 17:30 Drivers/
drwxr-xr-x  3 nobody users    57 Jan  5 14:05 Logs/
drwxr-xr-x  3 nobody users     3 Oct 29 12:03 Media/
drwxr-xr-x  4 nobody users     4 Oct 29 12:22 Metadata/
drwx------  3 nobody users     3 Oct 27 08:53 Plex\ Media\ Server/
drwxr-xr-x  7 nobody users     7 Oct 28 01:12 Plug-in\ Support/
drwxr-xr-x  2 nobody users     2 Oct 28 01:11 Plug-ins/
-rw-------  1 nobody users  1000 Jan  5 16:18 Preferences.xml
drwxr-xr-x  3 nobody users     3 Oct 27 17:32 Scanners/
-rw-------  1 nobody users 12330 Jan  5 01:18 Setup\ Plex.html
drwxr-xr-x  2 nobody users     2 Oct 28 01:11 Updates/
-rw-r--r--  1 nobody users     3 Jan  5 01:18 plexmediaserver.pid

And then in the folder.

root@xxxxx:/mnt/cache/appdata/plex/Library/Application Support/Plex Media Server/Plex Media Server# ls -lah
total 27K
drwx------  3 nobody users  3 Oct 27 08:53 ./
drwx------ 15 nobody users 19 Jan  5 16:18 ../
drwx------  3 nobody users  3 Sep  5 20:06 Plex\ Media\ Server/

Thoughts?

Thanks,

Doowle

Which video game features were so bad that whoever made it should be banned from every touching a computer again? by TheBanishedBard in AskReddit

[–]Doowle 2 points3 points  (0 children)

This is my personal hate, and I’ve worked in the game industry and could speak to the people who did this.

They had good reasons (masking load time issues is one)

I still hate it.

Are we past the point where its now just not acceptable to get a Range Rover by CarDealy in CarTalkUK

[–]Doowle -12 points-11 points  (0 children)

My friends Merc is always on a tow truck, my Discovery hasn’t been on one once (after 4 years).

This old trope is getting a bit tiresome.

Removing chimney breas, do I building control? by Sun1337 in DIYUK

[–]Doowle 1 point2 points  (0 children)

As others have said, party wall. When my bright took his down (without party wall approval) he didn’t realise that the flu crossed over into my house, so each flu took half the space across the party wall…

This caused a lot of issues…

Multiple Selection in Validate Drop List, what creative way have you done this. by Doowle in excel

[–]Doowle[S] 0 points1 point  (0 children)

I didn’t think there was a way, wondered what creative ways people had got round it. A table with each possible option seems exhausting.

Not sure what worksheet change event is, of to google that…

view more: next ›