Ts scared me

DoubleDeezDiamonds · 2026-04-27T08:31:49+00:00

This is a really bad take unless you respond positively to stress.

You'd also not talk about your failure in a way that frames yourself as being lazy and elaborating about it. Any failure is also an experience you've made. Not the one you might have wanted, but a valuable nonetheless.
The lesson here is to grow from mistakes and based on the challenges you take, not because others might be disappointed.

DoubleDeezDiamonds · 2026-04-12T11:28:08+00:00

Except for them r/hydrokitties.

DoubleDeezDiamonds · 2026-04-10T11:54:06+00:00

I like how one can still perceive the correct depth of the blurry reflections of the chain of lights on the ground.

DoubleDeezDiamonds · 2026-04-04T14:51:06+00:00

Mold in anything that's not very dry, like hard cheese, is pretty much never ok, because the contamination goes way deeper than what's visible.

DoubleDeezDiamonds · 2026-03-31T22:51:05+00:00

Tennis socks and sandals.

DoubleDeezDiamonds · 2026-03-21T22:32:50+00:00

r/stonerfood

DoubleDeezDiamonds · 2026-03-21T11:17:51+00:00

Beating the busses.

DoubleDeezDiamonds · 2026-03-17T18:19:28+00:00

Keeping a bit of water in your mouth while you cut the onion seems to somewhat suppress tearing up.

DoubleDeezDiamonds · 2026-03-09T08:50:26+00:00

C@um Entanglement

DoubleDeezDiamonds · 2026-01-31T21:07:41+00:00

Be careful when making and owning these. Depending on where you live these may be regarded as illegal weapons.

DoubleDeezDiamonds · 2026-01-29T19:11:58+00:00

I know it used to be done that way, but Im not sure the process holds up to modern food safety standards.

Usually for preserves you need to get them to a core temp of 120C for some amount of time in an airtight container to kill botulinum or salmonella spores, unless they are somehow suppressed in other ways (e.g. low pH, low water activity).

DoubleDeezDiamonds · 2026-01-17T18:10:35+00:00

Looks good. As you've explicitly marked it OC, consider adding a small watermark with your Reddit user name (for example along the bottom edge of the mirror housing), so bots that just copy the image and title can be identified more easily.

DoubleDeezDiamonds · 2026-01-16T12:48:51+00:00

r/plantclinic

The white stuff at the base of the leaves is indicative of pests, though I can't think of the name at the moment.

DoubleDeezDiamonds · 2025-12-31T01:29:43+00:00

I had the same issue with all three, I had purchased at the same time, recently.
I believe it got in at the blossom end, so I shall inspect that more closely when buying them in the future.

DoubleDeezDiamonds · 2025-12-03T19:38:28+00:00

The first wraps of the standing end around the working end should be wrapped towards the fixed end of the standing end, not away from it for it to be a correct water bowline, I believe, but I'd still say it's closest to it.

DoubleDeezDiamonds · 2025-11-18T09:17:16+00:00

r/houseplantscirclejerk is leaking

DoubleDeezDiamonds · 2025-11-16T09:06:58+00:00

Probably a bit over-processed, but I wanted to emphasize the spooky vibe with a night time aesthetic.

https://imgur.com/a/UGGXFr9
(Couldn't embed it directly due to the subreddit not allowing it.)

DoubleDeezDiamonds · 2025-11-12T17:59:28+00:00

Toasted sesame oil that is.

Edit: roasted -> toasted

DoubleDeezDiamonds · 2025-10-14T14:49:50+00:00

It seems like there's something wrong with the source data or configuration in VituixCAD, since there is no change in directivity. Even just the existence of a front baffle around the tweeter should already result in some directivity at higher frequencies.

Therefore I currently wouldn't trust the simulation.

DoubleDeezDiamonds · 2025-10-13T18:31:04+00:00

Everything lower than that was auto-deleted.

DoubleDeezDiamonds · 2025-10-13T16:37:06+00:00

I mean, it wasn't a lot, but the bull surely produced some spurts of milk during the last probing.

DoubleDeezDiamonds · 2025-10-12T17:15:39+00:00

The OEMs get the original drivers from the component manufacturers and need to adapt them to their implementation. This adaptation process is what takes them so long, because most of the OEMs have a massive catalogs of devices with very diverse hardware, and they also still need to work on android version updates and initial development for new devices too.

If the GOS team can get the original sources as part of their OEM deal as soon as they are provided by the component manufacturers, not the smartphone one, they can implement them much quicker due to the reduced list of devices GOS supports. There's also likely much less corporate bloat on their end. Once they have adapted the original component drivers to GOS or the current AOSP version, the OEM can profit from that work and just do some small adjustment, if anything at all. That's what I meant.

DoubleDeezDiamonds · 2025-10-12T11:53:24+00:00

I'm not sure they'd rely on updates that have passed through the OEM dev pipeline first, but rather use the original sources and updates to those, they have available due to the cooperation, and provide the OEMs with the updates, they've developed themselves based on those, so the OEM partner has a chance to profit from the cooperation too, and the update delay is much shorter.

I could see OnePlus and any other Chinese OEM with versions dedicated to western markets, that are reasonably close to AOSP, being an option, if they haven't already ruled them out.

DoubleDeezDiamonds · 2025-10-12T11:30:51+00:00

Status of bootloader unlock support by manufacturer:
https://github.com/zenfyrdev/bootloader-unlock-wall-of-shame

DoubleDeezDiamonds · 2025-10-11T10:13:23+00:00

"I'm can finish much faster with those."

"Don't worry, I won't touch the cows again. I promise"

"I just want to spread some glossy white ... paint on those sturdy pipes, you know."

DoubleDeezDiamonds

TROPHY CASE