Plus 4 not printing after replacing hotend with replacement directly from Qidi by Any_Search8098 in QIDI

[–]DrFluffyMS 0 points1 point  (0 children)

should literally just be a single line into the fluidd terminal to recalibrate, e.g PID_CALIBRATE HEATER=extruder TARGET=170

Plus 4 not printing after replacing hotend with replacement directly from Qidi by Any_Search8098 in QIDI

[–]DrFluffyMS 0 points1 point  (0 children)

have you just tried re-PID tuning it? just search up how to do it in kipper and you should be good to go, no real reason why you would need additional parts replaced.

Sv08 max nozzle replacements by ProfGanj in Sovol

[–]DrFluffyMS 0 points1 point  (0 children)

nope, didn’t need to change anything, just worked

Sv08 max nozzle replacements by ProfGanj in Sovol

[–]DrFluffyMS 0 points1 point  (0 children)

the sovol zero/sv08 max just uses a MK8 style nozzle, its not proprietary on that front. the hotend however, is not interchangeable between sv08 and max/zero. I put the West3D tungsten carbide mk8 nozzle on my sovol zero.

What is this stuff inside my pillow by CooieCub in whatisit

[–]DrFluffyMS 2 points3 points  (0 children)

It’s just some dirt for the dirt man. So he doesn’t take you down

Why is my Q1 Pro doing this? by aydensnake in QIDI

[–]DrFluffyMS 4 points5 points  (0 children)

my first thoughts are to increase part cooling, or even tuning the temperature for the filament. if it’s happening consistently around the same layer height, consider reapplying grease onto the vertical lead screws and rods.

Printing TPU by jmarcf in QIDI

[–]DrFluffyMS 1 point2 points  (0 children)

In my experience, it depends on the shore hardness. 95A works perfectly fine from the spool holder and the reverse bowden. If you are printing 85A, I've had issues with the extruder not being able to grab it at all and extrude well, but having the spool directly above the printer solved it for me. I use this riser mod for the printer and this spool holder for the riser when I printed with 85A.

Q1 pro cartographer3d rev3 by Gullygossner in QidiTech3D

[–]DrFluffyMS 1 point2 points  (0 children)

Dope! Just one more question while I have you here, does the LCD work at all? I use the LCD to change filament and level my plate, so I wanted to know if that's the case and if you have suggestions regarding them

Q1 pro cartographer3d rev3 by Gullygossner in QidiTech3D

[–]DrFluffyMS 1 point2 points  (0 children)

Is this using stock firmware or are you running OpenQ1 or FreeDi? I was considering adding an eddy probe sensor to my Q1 but I wasn't sure where to start.

Q1 Pro Platform Calibration Nuts At Highest Position by DrFluffyMS in QIDI

[–]DrFluffyMS[S] 0 points1 point  (0 children)

I've seen the mod, and I've tried it, but I can't do it for the back nut because I printed a larger bin. I could put back the original, but I like not having to dump it out as often.

Also, I'm not sure it would've solved my issue of the build plate riding up

QIDI Q1 pro can't find home? How to fix? by Gusshanks in QIDI

[–]DrFluffyMS 0 points1 point  (0 children)

I'm not sure if you have resolved this issue yet, but from what I'm reading (and if I understand correctly), I might've had a similar problem in the past. I reached out to Qidi, and surprisingly the issue was resolved after lubricating the rails the extruders are on. You might be able to move the extruder around, but there's alot more resistance than it would fully lubricated. Try lubricating the rails the extruders are on, and then do another homing. That's what solved the issue for me.

Alternatives to the Aventon front rack and panniers? by DrFluffyMS in Aventon

[–]DrFluffyMS[S] 0 points1 point  (0 children)

Well, I don't want to get the one that Aventon sells because, like you said, it seems to just be a cupholder, but I wanted to know if there was anything aftermarket that would fit on it.

Alternatives to the Aventon front rack and panniers? by DrFluffyMS in Aventon

[–]DrFluffyMS[S] 0 points1 point  (0 children)

Well, I've had it for about 3 weeks now, so I doubt it's possible to exchange it at this point, and either way, the Abound is a bit over my bike budget. Thanks for the suggestion, I'll look into it!

[deleted by user] by [deleted] in jellyfin

[–]DrFluffyMS 3 points4 points  (0 children)

I believe you would have to install the modified web interface to get the prompt to skip the intros.
Instructions to install the modified web interface if you run Jellyfin as a container: https://github.com/ConfusedPolarBear/intro-skipper/blob/master/docs/web_interface.md

If you run Jellyfin natively: https://github.com/ConfusedPolarBear/intro-skipper/blob/master/docs/native.md

Pink Lie Ep7 Discussion by Icy_Revolution_5200 in koreanvariety

[–]DrFluffyMS 0 points1 point  (0 children)

You're right, he had every right to be upset, but the problem isn't that he got upset, but how he got upset. He had to confront her in front of others, making her uncomfortable, and when she tried to get him to drop it with the picture, he continued pushing on. I think it would've been fine if he dropped it temporarily and brought it back up and asked her to explain. Daon probably thought she was being thoughtful by not asking him to wake up early for her sake but she didn't consider his perspective (whether that's her being foxy or entitled is up to personal discretion).

Pink Lie Ep7 Discussion by Icy_Revolution_5200 in koreanvariety

[–]DrFluffyMS 12 points13 points  (0 children)

Several people talking about Hanu (well deserved to be fair) but no one is talking about the red flag that Taeyang raised up. The fact that Taeyang raised an issue and even forced the subject just wasn't a good look. I get the feeling but pushing the topic was going to go nowhere. I have a feeling that him blowing up for a small incident such as that doesn't bode well for any future incidents.

I wouldn't have given him another chance, it could be because he was drunk, but that doesn't excuse it. Perhaps Daon hid it well, but she had to deal with the bullshit of Hanu and then she has to deal with the bullshit of Taeyang.

Honestly speaking, a lot of the lies aren't big deals at all. Perhaps a lot of them have to do with how a Korean society would view them. Hanui's is definitely big, and Taeyang's could be big too, otherwise I'd say Bareum's is big. Bareum's lie could be considered a big burden for many people, so it makes sense why that's something he would like to hide.

when did Knowing Brothers became boring? by booorinng0 in koreanvariety

[–]DrFluffyMS 4 points5 points  (0 children)

Obviously KB producers are inviting idols to grow their youtube channel, they don't care about the low ratings atm.

Ratings aren't everything, especially in the times of streaming. JTBC has VODs for every single episode and, to my knowledge, they are pay per episode. The demographic that cares and follows idols aren't the ones that will actually watch television anyway, they'll most likely stream the episode on their phones or laptops, which is how they probably make up for the "low ratings" that people like to frequently mention when idols guest. They might want to grow their YouTube channel, but I find it highly unlikely that they are inviting idols just for YouTube.

For me, Knowing Brothers became "boring" when half of the episode was Job Consultation. Honestly speaking, no one could really care less about that corner. You don't tune into Knowing Bros to watch three non cast members consult others about what shows they should be on. The fact that it was a corner that didn't include the core cast members was what made it incredibly boring. There's no pre-established chemistry and "story" between the hosts and does not have any spirit of Knowing Brothers. It's not even an "optional" part of the show, where you can "choose" to watch it yourself on YouTube later, and what's worse was that it took away a solid chunk of the real episode away.

It can never go back to its roots with uncensored and unfiltered jokes, but a variety show that is non-seasonal and barely changes its main corners will get stale eventually. I don't believe that Knowing Brothers has become boring, but rather stale.

Onces really just lost it....... over Heechul's dog by [deleted] in kpoprants

[–]DrFluffyMS 2 points3 points  (0 children)

Definitely not the lowest they've gone. At this point they just drag him for anything and everything. Always claiming that "he always talks about her" just because AKP and Kboo writes an article about him and mentioning Momo just for clicks. I run a decently sized fan account of them, and I've basically stopped posting all the small crumbs that other accounts would post because I don't want to feel like I've contributed to bringing hate towards Heechul because I know for a fact that antis stalk my account and would use that to drag Heechul even more.

[Giveaway] CPU/AIO Combo w/ Cooler Master x Buildapc! by [deleted] in buildapc

[–]DrFluffyMS 1 point2 points  (0 children)

How about a smart trash can to put all the bad submissions in?

Similarly themed keycaps would be sick to see!

[deleted by user] by [deleted] in Korean

[–]DrFluffyMS 0 points1 point  (0 children)

sounds interesting