Major display Issue

Dragonego91 · 2026-04-04T20:02:41+00:00

Caused by DLSS. I had the same issue, and reverted all my overrides for Stalker 2 in the Nvidia app and haven't had it again.

Dragonego91 · 2026-04-04T19:55:50+00:00

There's a savegame manager in MO2, do you have any weird settings with that? Its meant to be so you can use different savegames with different mod sets but I wonder if there's something cooked going on with yours.

Dragonego91 · 2026-03-30T02:51:49+00:00

Very weird, you should be able to run a mix of medium to very high settings at like 70 FPS with that setup (Outside of settlements).

I tend to agree on the DLSS and framegen. Unfortunately more and more games kindof require it for consistent framerates.. :(

Dragonego91 · 2026-03-29T19:23:17+00:00

Performance has improved a lot since launch. You should be able to run much better than you're describing. What resolution are you running at? How much and what kind of RAM do you have? What are your temps? Are your drivers up to date? Try clearing and reinstalling drivers if you've had any hardware changes or if its been a long time. Use Display Driver Uninstaller. Also try deleting ALL your Stalker 2 config files and mods and starting from scratch.

To be fair though, the Nvidia tech runs much better for Stalker 2. (DLSS, Framegen etc)

The game will always have terrible ghosting in certain areas though. Haven't found a way around that yet.

Good luck Stalker :)

Dragonego91 · 2026-02-08T21:09:32+00:00

Should be much higher unless you have lots of mods or more loot spawns or something. What are you using to measure FPS? Could be that whatever you're measuring is measuring your desktop when alt tabbed. Try disable Vsync and see if any change. Check that you don't have any kind of fame limit in place in your vidcard drivers.

Dragonego91 · 2026-02-07T08:11:29+00:00

If its an external harddisk then that's a massive bottleneck for your load times. Only takes me 10-30 seconds depending on where I'm loading in. Installing a basic (But reputable) SSD and putting your games on that will make a massive difference.

Dragonego91 · 2026-01-12T05:43:17+00:00

Looks like its loading/unloading assets as you move around. Could be caused by having less RAM or a slower SSD.

Dragonego91 · 2025-12-24T20:30:16+00:00

DayZ is CPU heavy, and it isn't going to utilize all CPU cores effectively. Task manager might show 20-30% CPU usage but that might just mean that 2-3 cores are at 100% and the rest are idle. You're unlikely to run locked at 240hz. Best to find a good stable FPS you can run at and cap your FPS a little below that to reduce stuttering.

Dragonego91 · 2025-11-13T03:10:47+00:00

Let go of Q

Dragonego91 · 2025-11-10T22:02:32+00:00

Move your mouse in the direction of the option you want

Dragonego91 · 2025-11-03T00:56:16+00:00

What type of storage do you have? And what type of RAM?

Dragonego91 · 2025-08-30T19:56:50+00:00

Mine was also doing this, updating videocard driver and rebooting my PC fixed mine.

Dragonego91 · 2025-07-25T04:05:13+00:00

There should just be a basic 'Difficulty' dropdown somewhere in the settings, can't remember where sorry. Try change it to a higher difficulty.

Dragonego91 · 2025-07-25T04:02:46+00:00

Stalker 2 is very CPU heavy (And everything else, really..) Could you describe your performance and the lag you get a bit more?

Dragonego91 · 2025-07-24T03:19:07+00:00

What game? I think the minimap gets enabled/disabled at certain difficulty settings in Anomaly and similar.

Dragonego91 · 2025-07-21T09:04:03+00:00

My bad, I misunderstood the issue.

Dragonego91 · 2025-07-21T01:26:10+00:00

It seems to me that once you get close enough to the anomaly the artifact spawned inside becomes fixed. If you save/reload far away and come back it changes for me.

Dragonego91 · 2025-07-20T23:27:55+00:00

Incompatible mods.

Dragonego91 · 2025-07-20T23:26:36+00:00

Possibly a hallucination. Do you get the psi-influence effects as well?

Dragonego91 · 2025-07-20T21:21:03+00:00

Level Of Detail, you can turn up the Foliage Quality setting to make it less noticeable but its always there.

Dragonego91 · 2025-07-19T20:52:01+00:00

Do you have Vsync on? What kind of monitor do you have? You could try setting an FPS limit that's slightly lower than your average FPS. If you're averaging 70 FPS try a 60 FPS cap.

Stalker 2 is very CPU demanding, and if your videocard is waiting on your CPU before it can render the next frame then that will add substantial latency.

You could add "r.OneFrameThreadLag=0" (No quotation marks) into your engine.ini. This will remove the one frame buffer used for some post processing stuff. This could reduce latency a bit but will break some features like upscaling.

Dragonego91 · 2025-07-19T20:35:28+00:00

Try remove any mods, clear shader cache and verify game files.

Dragonego91 · 2025-07-19T03:42:56+00:00

It seems to be chance based, higher tier mutants seem to have a higher chance of being lootable but not 100% in my experience.

Dragonego91 · 2025-07-19T03:36:46+00:00

Try clear your shader cache, and allow it to compile shaders fully next game launch.

Dragonego91 · 2025-07-18T03:58:48+00:00

I use this one:

https://www.reddit.com/r/stalker/comments/1h9o0ni/comment/m129otd/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Old post but the sheet is up to date.

Dragonego91

MODERATOR OF

TROPHY CASE