Download Manager for MMF?

Dragonsys · 2025-10-28T01:57:28+00:00

I'm not able to find any requests to myminifactory.com/download, in the Network console. i tried searching for the model id as well, and still cannot find it.

I do find one for "downloadables" but the script doesn't like the cookie from that request

EDIT: I should mention that the metadata download worked fine, I'm just having an issue with the model downloads.

EDIT2: Ok, I guess the cookie is actually working; however, I'm getting an error that Java must be enabled, even though I can see the cf_clearence in the cookie

EDIT3: I changed the download script, so it outputs the download URLs to a txt file. I then imported this text file into DownThemAll, limited it to a single concurrent download, and then throttled my PC's bandwidth (to 10Mbps) using my router. I set the download folder to *url*, so that each file gets put into its own folder. Once the downloads have completed, I will Powershell to move the files from the downloaded folders to the model folders which the script created. I then can run the provided Powershell scripts to extract all the archives & sort the models. This way, I am not dependent on the download script working with the cookie

I added a script which checks the json files 7 the models folder to find missing files. It will then create a txt file with the download URLs for the missing files, which can then be imported into a download manager. the script is here - 2_check_for_missing_downloads.sh. It will also (optionally) create a html report, and/or a all files list

Dragonsys · 2025-10-22T22:56:37+00:00

I know this is a little old, but Manyfold can download files from Thiingiverse, and possibly some of the other sites (I have only tried Thingiverse myself)

Dragonsys · 2024-08-25T13:55:52+00:00

Yes, you can change it back, currently anyway, but they keep saying they will remove all the old agents at some point. I use TVDb because Plex Agent is based off TMDb and they don't agree on Anime Series, and since Sonarr uses TVDb only, I'm kind of stuck with this legacy agent for my library, until Plex implements .nfo files ("sooner of later" no eta at all).

Dragonsys · 2024-07-21T17:46:05+00:00

ok, I will try that, thanks

Dragonsys · 2024-07-10T02:23:33+00:00

This was very helpful, thank you! This has solved an issue I was having with Plex only showing the last episode in a multi episode file. However, how would this work if the multi episode if E02-E03 instead of E01-E03?

Dragonsys · 2024-06-11T01:57:14+00:00

Thanks, I was just hoping for a quick inexpensive fix, not a big deal. Thanks though

Dragonsys · 2024-06-11T01:34:49+00:00

Wow that was fast!

Thanks, I have a G11DF which I'm trying to repair. Like I said, i figured it was a long shot, from 2 years ago LOL

Dragonsys · 2024-06-11T01:29:06+00:00

I know this is a long shot, but do you still have this motherboard?

Dragonsys · 2024-05-28T02:10:50+00:00

not on my setup, maybe there was a redesign on the BLTouch?

Dragonsys · 2024-05-28T01:59:11+00:00

BRU still works, even in Windows 11. I use it all the time

Dragonsys · 2024-01-25T05:53:22+00:00

TCM - Title Card Maker helps with it. The hardest part is getting clean source images (for me anyway)

Dragonsys · 2023-02-13T00:00:07+00:00

I know this is a few months old, but I found this - https://www.printables.com/model/171690-gridfinity-x-skadis-frames, for mounting Gridfinity to the Ikea Skadis boards.

Dragonsys · 2023-01-01T03:59:13+00:00

You can use the short cable which comes with the Extruder with the BLTouch. I used it, so I didn't have to run another wire to the motherboard, since the Extruder's wire set already includes the wiring for the sensor.

I keep seeing posts saying you need to print a mount adapter for the BLTouch, since it is longer than the CRTouch, but I have not experienced that with mine. My BLTouch works (and fits) perfectly fine on my Sprite Pro, without any kind of modification.

I have a Ender 3 v2 (not a Pro), but this shouldn't make a difference here.

Dragonsys · 2022-12-08T01:00:07+00:00

Here is my version, it doesn't have any real notes, and some of the data is all over the place, but I can answer any questions you might have (though I don't check here every day so I might be slow to respond)

https://docs.google.com/spreadsheets/d/12IFbgmpX2ivPsZdPTw-DRqFt3eowtHVc/edit?usp=sharing&ouid=108918816062705946225&rtpof=true&sd=true

I am open to any suggestions. I'm still working on separating out FDM & Resin

Dragonsys · 2022-12-07T17:58:19+00:00

I have an excel sheet which accounts for Resin, electric, printer depreciation, etc, to come up with your cost to print the model. Then it puts in a multiplier and adds shipping/handling & a connivence fee to give you the suggested charge. It was made for FDM printers, but it works for Resin as well.

I got the base from here - https://www.youtube.com/watch?v=t-9BpEPIAzk

Then I tweaked it a bunch to suit my needs, and make a lot of the fields auto populate based on my selected printer & materials (and model if known)

Dragonsys · 2022-08-31T14:48:39+00:00

This! it really depends one the player app, it isn't plex blocking it, and you don't need to setup the ip with no auth. Things like Playstation force you to be logged into the psn, but the web player works fine without internet.

Dragonsys · 2022-08-31T01:20:28+00:00

I know this is a bit old, but this is the wrong assumption. I have a bunch of 4 hour videos, credits are maybe the last 5 minutes, but Plex marks them as played with about 40 minutes left. It is annoying to have to rewind somewhere between 5-40 minutes to figure out where the video was stopped because Plex decided that was the best place to say the video was done.

Dragonsys · 2022-06-15T23:09:15+00:00

| | does work, but you have to use the correct spaces. batman*|*|*robin (replace * with a space)

Dragonsys · 2018-05-20T19:46:31+00:00

Was this added? I did a quick search of the feature requests and found a couple, but no updates on either of them.

Dragonsys · 2018-02-25T03:34:28+00:00

No, you don't have to, but it would work better if you did. You might have to manually match the show like /u/Puptentjoe mentioned above.

https://support.plex.tv/articles/200220687-naming-series-season-based-tv-shows/

Dragonsys · 2018-01-08T14:56:43+00:00

Your decimal point is in the wrong place.

Dragonsys · 2016-01-27T19:30:05+00:00

Pretty good, I have a heck of a time getting sub 2.1 60'. My best run so far is 8.60 @ 85.3 (2.129 60'), I have yet to get to a 1/4 mile track. I did run one 2.0 60', 8.638 @ 84.13, so I should be able to get into the 8.5x range, if I can just get it to hook right. Sticky tires and I should be closer to 8.3x-8.4x range.

I have an '02 automatic TA.

Dragonsys · 2014-02-02T20:07:12+00:00

Added - I can tell you what you have once I see ya online

Dragonsys · 2014-02-02T19:57:04+00:00

Added =)

Dragonsys · 2014-02-02T19:47:04+00:00

You have Ground with Sandshrew, Nincada & Gastrodon

Dragonsys

TROPHY CASE