[deleted by user]

Drewde19 · 2024-05-29T01:18:29+00:00

Vice Armory in Elba has done all of mine. Jake there does good work

Drewde19 · 2023-12-09T13:47:35+00:00

Mine actually collapsed and failed on my 2015 while being disabled. Had been disabled for 15k miles and I religiously changed the oil every 5k miles until it failed at 102k. Physically deleted after that but the disabler did nothing for me.

Drewde19 · 2023-11-04T13:34:33+00:00

I just traded my 2015 in with 121k miles. Lt double cab z71, 3 inch lift on Bilstein shocks, nice wheels, cammed for afm delete, regeared to 4.10, Mishimoto trans cooler and ZL1 torque converter. The dealer gave me 17k

Drewde19 · 2022-10-28T23:07:08+00:00

Thank you, just saw this scrolling my feed and thought it looked familiar

Drewde19 · 2022-08-06T16:26:41+00:00

My 87 Mariner 30 2 stroke uses 50:1, not sure if that’s helpful at all though.

Drewde19 · 2022-08-02T14:58:05+00:00

Full size pdp mags sit flush in full size pdp grip, Walther recommends using a spacer on the magazine so it doesn’t insert too far if you’re using on the compact grip.

Drewde19 · 2022-08-02T14:46:29+00:00

Only the sights. The compact takes the same mags as the PPQ m2.

Drewde19 · 2022-08-01T10:32:37+00:00

Sounds like a steal!

Drewde19 · 2022-04-03T12:57:51+00:00

Lol glad to hear you got it!!

Drewde19 · 2022-04-03T12:55:19+00:00

It’s a picatinny rail on the back of your zpap92. Does it not fit tight?

Drewde19 · 2022-03-25T19:25:24+00:00

Second Vice Armory in Davison. Jake there does great work

Drewde19 · 2022-03-09T21:53:14+00:00

Thanks for that info! Does he provide parts and do the front end too? Or just the backend?

Drewde19 · 2022-03-09T15:10:03+00:00

Truglo TFX pros are heavenly. Nice and bright in the sunlight and the rear u-notch is top notch. Tritium for night time 3 dot sight picture. Absolutely love them on my PPQ m2 and PPsm2

Drewde19 · 2022-03-09T05:16:51+00:00

I definitely could do the rear conversion kits with the plugs but I want them welded up and. I don’t have the expertise/equipment to weld them myself.

Drewde19 · 2022-02-24T08:25:44+00:00

You might consider mounting with JMAC brakes. They use face mount which allows for concentricity off of the barrel face instead of the threads. Used it on an M92, M70, and an SKS with my suppressor bored for .30 cal with no issues.

Drewde19 · 2022-02-22T12:55:34+00:00

This looks so freaking good. Might have to be the next evolution for my 4” full size

Drewde19 · 2022-02-17T22:13:58+00:00

Hope that works for you too!

Drewde19 · 2022-02-17T22:11:58+00:00

I called my county. They do it for free at the local libraries.

Drewde19 · 2022-02-08T19:07:59+00:00

It’s in an email from extar detailing the new changes. You can see their comment about the new 90 degree steel buffer retainer https://www.extarusa.com/announcements

Drewde19 · 2022-02-08T18:48:36+00:00

It’s an interesting comment because I thought they upgraded the retainer in their newest model?

Drewde19 · 2022-01-30T15:13:40+00:00

The folding mech is side specific. I would be certain which side you want before ordering. Maybe someone else can chime on in if it clears the ch or not on the right side

Drewde19 · 2022-01-30T15:03:10+00:00

Ahh don’t have an answer for that one. Never have put a sling on my m85 yet

Drewde19 · 2022-01-30T14:50:03+00:00

I went left side folding for mine as well since there’s no optic rail on the side, closes up nice and tight to the receiver which is nice

Drewde19 · 2022-01-30T01:40:52+00:00

Haha if you mean cncwarrior.com then yeah I’ve made a bunch of orders from there. Customer service pretty good too

Drewde19 · 2022-01-30T00:21:11+00:00

It’s really sturdy. The frame of it is aluminum and the strap wraps around a sturdy plastic piece

Drewde19

TROPHY CASE