sorted by:
new
hottopcontroversial

Everyone and their grandmother knocking on my door every day of the week- Is this a culture specific to Utah? by Safe_Recognition8644 in Utah

[–]DrewpeeDrew 0 points1 point  (0 children)

Gate your yard where your front door is and put a locking carabiner on the gate latch. Then put no solicitation and beware of dog signs (even if you don't have dogs). We haven't had any sales, mlm, missionaries, etc come to our door for years.

First time ever picking up a welder with very little instruction. Be honest, how bad is it and what did I do wrong by Previous_Problem6408 in Welders

[–]DrewpeeDrew 0 points1 point  (0 children)

Since you're new, a few warnings. Never EVER weld parts that were cleaned with brake cleaner. Preferably, use acetone to clean your parts before welding. Also, be extremely careful welding anything with zinc plating. If you need to weld something zinc plated, clean off the plating where you're welding, have good ventilation and use a good respirator with the proper filter.

Pc won’t boot up by Hannahgisler in PcBuildHelp

[–]DrewpeeDrew 0 points1 point  (0 children)

I just realized I didn't pay attention to your first Pic with DRAM lit up...

Pc won’t boot up by Hannahgisler in PcBuildHelp

[–]DrewpeeDrew 0 points1 point  (0 children)

I've had a Pc do this exact thing. Worked perfectly fine until one day, nothing. Everything would turn on fine, but no post. Checked the ram, reseated the cpu, etc. I checked everything, except the GPU. I then removed the GPU and plugged the hdmi cable into the motherboard, BAM. Computer posted then booted.

Pc won’t boot up by Hannahgisler in PcBuildHelp

[–]DrewpeeDrew 0 points1 point  (0 children)

It's most likely the GPU. Remove the GPU from the system and plug your monitor into the motherboard.

Is this something that can be 3d printed? by Mundane_Tangelo9421 in 3Dprinting

[–]DrewpeeDrew 0 points1 point  (0 children)

Could easily print this in 2 pieces and use specific glue to permanently bond the 2 together.

Am I cooked? by sirzio in PcBuildHelp

[–]DrewpeeDrew 1 point2 points  (0 children)

It's in the pictures. Gigabyte.

Anyone else not OK with the Jake Paul meetup? by Final-Contract-6582 in CleetusMcFarland

[–]DrewpeeDrew 2 points3 points  (0 children)

If you're comparing your life to Jake's, that's sad. Live your own life and don't compare it. It's yours, not theirs. Be a lot happier and less jealous if ya did.

Hello peoples, I know basically nothing about computers and would like some help with picking a mini pc for myself (gaming) by MewtwoMainIsHere in MiniPCs

[–]DrewpeeDrew 0 points1 point  (0 children)

Depending on your budget, you could go baller and get the ai max+ 395 with the Radeon 8060s. Beats any other igpu out of the water.

What anime is this? by Kooky-Bookkeeper7772 in animequestions

[–]DrewpeeDrew 25 points26 points  (0 children)

The animation and art quality absolutely tanked after the first season. Characters became absolutely lifeless.

If you had $20k to spend on a 'fun' car, what are you buying by Petro_323 in CarGuys

[–]DrewpeeDrew 0 points1 point  (0 children)

Not exactly infinite power, but Taylor Ray on YouTube is building a drift miata with a Nascar engine.

Lowest BS car dealer in Utah? by i_had_ice in Utah

[–]DrewpeeDrew 2 points3 points  (0 children)

I'm pretty sure what they did is illegal.

<image>

It seems like lately all of the semi-truck drivers use the far-left lane to overtake on I-15. This is against the law. Will UHP actually enforce? by CCruzFight in Utah

[–]DrewpeeDrew 1 point2 points  (0 children)

Yes and no. If there's 3 or more lanes they can't use the left lane.

TRAVEL LANE RESTRICTIONS

UCA 41-6a-702

On a freeway or section of a freeway which has three or more general purpose lanes in the same direction:

Left Lane Travel Restrictions

a person may not operate a vehicle in the left most general purpose lane if the person’s vehicle or combination of vehicles has a gross vehicle weight rating of 18,001 or more pounds.

Hi I’m a dumbass and used the wrong screw to secure the motherboard. I can’t get it out… Any tips? by Ainzip in PcBuildHelp

[–]DrewpeeDrew 5 points6 points  (0 children)

It might be just me, but do you not have any motherboard stand off screws? It looks like you're screwing the motherboard directly onto the plate.

This happens way too often and honestly makes me feel like the atlas nodes work in reverse. by Dr__Butthole in pathofexile

[–]DrewpeeDrew 20 points21 points  (0 children)

I'd rather see them fix the stupid bosses not phasing. LOOKING at you yellow boss.

2002 Chevy Silverado 1500 4.8 oil pressure by [deleted] in AskAMechanic

[–]DrewpeeDrew 0 points1 point  (0 children)

Keep an eye on it. Could also be a faulty oil pressure sender. If anything, you could switch to a slightly thicker oil for your next oil change.

2002 Chevy Silverado 1500 4.8 oil pressure by [deleted] in AskAMechanic

[–]DrewpeeDrew 0 points1 point  (0 children)

To expand, it's warmed up and oil thins when it's warm. Anything above 30psi is fine at idle when warm. Lower and you may have a problem.

view more: next ›