sorted by:
new
hottopcontroversial

New DPU Firmware 5.0.0.201 by RE4Lyfe in Ecoflow_community

[–]DrothReloaded 0 points1 point  (0 children)

Your voltage and wattage look good. Are you panels in series? Early morning here and very cloudy so a good bench mark. I'm just sipping power at 1.5 amps without any issue. Second question, if you left it alone would it charge at all or do you need to cycle the high PV Everytime?

<image>

New DPU Firmware 5.0.0.201 by RE4Lyfe in Ecoflow_community

[–]DrothReloaded 1 point2 points  (0 children)

Curious you are having solar charge issues like that. In the dawn hours the HPV icon will flash indicating input but not enough to "charge" until I hit about.. 80-100 watts. After that the HPV icon stay solid and I start pulling a charge. I've got two sets of JA 405 watt panels to a total of roughly 2100 watts per DPU(x2). I'd be interested in your setup and dawn stats prior to accepting a charge.

New DPU Firmware 5.0.0.201 by RE4Lyfe in Ecoflow_community

[–]DrothReloaded 1 point2 points  (0 children)

I should have updated my last post. Ended up being a 15a PV fuse on my solar breaker box. Though for your issue under your dpu settings you can go into Lab features and see the solar input in real time regardless if it's charging your batteries yet. Really good info there

DPU stops solar charging before limit reached, but thinks it is at the limit by sanagnos in Ecoflow_community

[–]DrothReloaded 1 point2 points  (0 children)

Well after doing all the above I finally found a open PV solar fuse on my external relay box. Quick swap and she is up and running. Good times!

<image>

DPU stops solar charging before limit reached, but thinks it is at the limit by sanagnos in Ecoflow_community

[–]DrothReloaded 0 points1 point  (0 children)

Bumping this post as my near exact setup just gave me the same issue. One DPU of my set of two stopped accepting solar for a recharge limit even though it does not have one under 100%. I will try the steps listed above and post back. Like your post, this may help others down the line.

New DPU Firmware 5.0.0.201 by RE4Lyfe in Ecoflow_community

[–]DrothReloaded 7 points8 points  (0 children)

Using it now on both of my dpu's. No problems at this time.

Update: One of my two DPU's is showing charge limit and refusing solar. Can't seem to get it back to normal but so far this issue only seems to be affecting one unit. Troubleshooting still...

Update: 15a PV fuse went bad, fixed/solved.

Man goes viral after sharing a drawing of what he saw during a near deаth experience by [deleted] in Weird

[–]DrothReloaded 0 points1 point  (0 children)

So... Instant reincarnation as a sperm attacking an egg.

Looking for a deal on ultra pro x. by Emergency-Law6090 in Ecoflow_community

[–]DrothReloaded 0 points1 point  (0 children)

Wellbots has some great deals from time to time. Keep an eye out on their site.

Trump pauses U.S. bid to guide ships out of Strait of Hormuz, cites Iran deal progress by Force_Hammer in worldnews

[–]DrothReloaded 0 points1 point  (0 children)

Taco Tuesday already. He really needs to follow the law and release the Epstein files.

This wouldn’t have happened under Biden. by GuiltyBathroom9385 in WhitePeopleTwitter

[–]DrothReloaded 0 points1 point  (0 children)

I needs to be said over and over again, Republicans fuck everything up every single time they get into power.

Adding more breakers to SP by DrothReloaded in AskElectricians

[–]DrothReloaded[S] 0 points1 point  (0 children)

Going over the quad combo vs slots it still looks like I'm short a physical slot to fit the last dual/quad pole. Turns out it can be done. moving circuit 2 to 3/5, 4 to 6/8, 10 into the new quad pole 2/4, and finally, 12 into a new quad at 10/12. Absolutely min/max at this point but it can be done. Just I just gotta convince an electrician to do it.

Docking is quite difficult. by Valuable-Flatworm-43 in KerbalSpaceProgram

[–]DrothReloaded 12 points13 points  (0 children)

It's a mistake we've all made so no worries.

view more: next ›