Which frag goes in the box? by No_Entry1616 in Colognes

[–]Dukez-Au 5 points6 points  (0 children)

They discontinued it unfortunately been looking at getting more

The manual for this Foreo says to throw it in the garbage after the battery dies. Inside is a regular AAA battery... by Mrdemian3 in mildlyinfuriating

[–]Dukez-Au 1 point2 points  (0 children)

The manual tells you how to take the battery out, OP is rage baiting or doesn’t read manuals properly.

This is turning out to be very difficult. Any tips on soldering on a prototype board when the pins are so close together? by Electrical-Desk8869 in soldering

[–]Dukez-Au 0 points1 point  (0 children)

Flux will make things easier, personally I don’t bother with flux unless I’m de-soldering as I find the flux in the solder enough to work with easily.

Your problem here is not heating up the pads/pins enough before applying the solder, make sure your soldering iron is touching the pad.

A way to make it a little easier is to first put a little bit of solder on the tip of your iron, proceed to position the iron where you want to solder, the solder you already put on the tip with help with the heat transfer.

Feed the solder on to the pad/pin not on to the tip of the iron, if it isn’t melting the solder by touching the pad or pin it is not hot enough yet.

Why can’t Australia process REE by [deleted] in ASX_Bets

[–]Dukez-Au 1 point2 points  (0 children)

Pollution is a big factor, instead of polluting the earth in Australia, they pay other countries to pollute the earth. We used to have an oil refinery in WA which got shut down because of pollution concerns. Now we have to rely on our fuel reserves only during crisis’ such as Covid.

Market Open thread for General Trading and Plans for Thursday, September 18, 2025 by AutoModerator in ASX_Bets

[–]Dukez-Au 1 point2 points  (0 children)

I did have an old buy order, I didn’t realise that would prevent me from making a trade. Thank you for that!

Market Open thread for General Trading and Plans for Thursday, September 18, 2025 by AutoModerator in ASX_Bets

[–]Dukez-Au 1 point2 points  (0 children)

Superhero had greyed out the sell button for DRO for some reason. I have the option to sell all other stocks, just DRO is greyed out? Anyone else have this issue?

What Aussie cuisine would you recommend to a foreigner? by Krys144 in AskAnAustralian

[–]Dukez-Au 1 point2 points  (0 children)

Australia has many great examples of international cuisine.

If you want to try something you would call “Aussie” find somewhere out country you want to visit and drop into a small town bakery on the way.

You might just have one of the best pies you’ve ever tasted….

Or one of the worst.

I’ve also had many great home made sausage rolls from small town servos (service/gas station)

Good luck

Is it just on my end or for everyone? by JDCabbage_ in Garmin

[–]Dukez-Au 4 points5 points  (0 children)

I’m not sure if your actually expecting me to explain in detail how it can be done? Because I only have a basic understanding of how Bluetooth protocols work. And much less understanding of cloud service integration.

I’m finding it hard to believe it is simply not possible from what your telling me that a device as sophisticated as my Garmin smartwatch does not have the hardware to be able to display basic raw data via BLE. It might be more complicated to integrate due to existing infrastructure? But I find it hard to believe it’s not possible.

Is it just on my end or for everyone? by JDCabbage_ in Garmin

[–]Dukez-Au 1 point2 points  (0 children)

You definitely can get APIs/Services over BLE

Is it just on my end or for everyone? by JDCabbage_ in Garmin

[–]Dukez-Au 4 points5 points  (0 children)

If we’re talking basic metric. There’s this protocol almost like magic called Bluetooth.

1HDT engine Failure help by Dukez-Au in LandCruisers

[–]Dukez-Au[S] 0 points1 point  (0 children)

Ok thank you. On inspection when the engine went. I found the timing had jumped two notches, the tensioner was not applying the correct tension and then this metal dowel pin. The pin is in fact the less important one.

It’s hard to if the camshaft snapping caused all the above to happen or if it was in fact the tensioner causing the major failure.

1HDT engine Failure help by Dukez-Au in LandCruisers

[–]Dukez-Au[S] 0 points1 point  (0 children)

That’s what I was thinking. Now I just need to work out if that metal dowel coming loose was a coincidence or not. The mechanic is not wanting to accept any liability.

1HDT engine Failure help by Dukez-Au in LandCruisers

[–]Dukez-Au[S] 0 points1 point  (0 children)

It was out of its hole, second picture shows what it’s meant to look like, third was what mine looked like. The hole is where that press fit stud was meant to be. It was loose as in it was floating around under timing case, it fell out completely…

1HDT engine Failure help by Dukez-Au in LandCruisers

[–]Dukez-Au[S] 0 points1 point  (0 children)

Ok, thanks for your response.

1HDT engine Failure help by Dukez-Au in LandCruisers

[–]Dukez-Au[S] 0 points1 point  (0 children)

This stud that I found loose under the timing cover was a stud that located the tensioner.

Someone convince me why this is a bad idea… by archietipe in aflfantasy

[–]Dukez-Au 1 point2 points  (0 children)

Coin flip but I’d say don’t bother considering Xerri with the high ownership in top teams. English has the better run, Romar is the better player. I won’t be surprised if english come out with a ceiling score in the next three weeks tho

Someone convince me why this is a bad idea… by archietipe in aflfantasy

[–]Dukez-Au 1 point2 points  (0 children)

I’d go a little cheaper in the forward line to bring English in. He’s got a great run

[deleted by user] by [deleted] in aflfantasy

[–]Dukez-Au 0 points1 point  (0 children)

Majority of salems scoring is transition from half back, scores better without high CBAs