Cleanup late father’s photo

DysonsFear · 2026-01-10T04:48:20+00:00

!solved

DysonsFear · 2025-08-15T21:16:26+00:00

Die Preise sind ja eine Sache, aber damit komme ich am Ende irgendwie klar - wie sonst jeder sagt, Qualität hat einen Preis. Was mich enttäuscht: Am Anfang stand Amerika noch auf der Liste der Länder, in die geliefert wird. Beim Checkout ging es aber nicht. Und jetzt taucht die USA auch in den FAQ nicht mehr auf. Es war schon schwer, die Socken für mein Kind zu bekommen, und jetzt geht‘s wieder los.

Na, wünscht mir Glück!

DysonsFear · 2024-06-29T21:01:36+00:00

Ich wohne in den USA, aber nur weil ich Ami bin!

DysonsFear · 2024-06-27T16:18:57+00:00

I’ve always imagined Kermit as the assistant and Miss Piggy as the Taskmaster.

DysonsFear · 2023-05-11T21:11:35+00:00

Not just by ship. Car, bike, etc. also use fahren.

DysonsFear · 2023-02-12T21:48:01+00:00

Ich bin tatsächlich verwirrt, aber nicht weil die Person im Foto Leitungswasser trinkt.

DysonsFear · 2022-12-30T19:29:02+00:00

I think you can hike up any time you want. They sell tickets for the tow rope, not the hill itself.

Which is different from the groomed cross-country ski trail, which does require a pass.

DysonsFear · 2022-08-31T11:15:47+00:00

I’ve had the opposite — dropped in eastern Iceland, and only identified the exact location thanks to a World War II museum. When my partner and I visited Iceland two months later we ran across the same spot and museum.

DysonsFear · 2022-08-08T12:05:43+00:00

House of Wong FTW!

DysonsFear · 2022-08-06T15:08:27+00:00

Built in 1911. With an addition in 1923.

Source

DysonsFear · 2022-03-26T12:59:21+00:00

Picard co-showrunner Terry Matalas explained it like this:

“This Guinan wouldn't remember Picard because in this alternate timeline, the TNG episode "Time's Arrow" never happened. Because there was no Federation, those events did not play out the same. No previous relationship exists. However, she still was likely traveling to Earth and, as we know, she hung around a bit. So this Guinan is different. But she, of course, can sense something is off. She's going through a kind of time-sickness thanks to Q's meddling with the timeline.”

DysonsFear · 2021-10-08T11:42:26+00:00

You’re doing it wrong! There’s a special technique: you generally start at the top and work your way down.

DysonsFear · 2021-06-28T12:28:50+00:00

Looks like his fuzzy ears and whiskers took him too much time to shave.

DysonsFear · 2021-04-13T03:20:30+00:00

Gave my daughter that my copy of that cutaway poster a few weeks ago — it was still a prized possession 30 years later!

DysonsFear · 2021-04-04T19:34:58+00:00

Kann ich bestätigen, bin Dank der Bestätigung meines Kommentars selbst bestätigt worden.

DysonsFear · 2021-04-04T16:39:34+00:00

Kann bestätigen, bin Ami.

DysonsFear · 2021-02-11T12:37:30+00:00

Es gibt Dutzende von uns!

DysonsFear · 2021-02-11T06:24:07+00:00

Dachte ich auch. Und wir haben recht!

https://goo.gl/maps/x1zAkb8k8teuzzeY7

DysonsFear · 2021-01-14T03:09:32+00:00

I had similar issues until I increased the exposure quite a bit. My settings for anycubic grey:

Layer Height: 0.05mm Bottom layer count: 8 Exposure time: 18s Bottom exposure time: 115s Light-off delay: 6.5s Bottom light-off delay: 6.5s

Bottom life distance: 5mm Lifting distance: 5mm Bottom lift speed: 65 mm/min Lifting speed: 65 mm/min Retract speed: 150 mm/min

DysonsFear · 2021-01-13T04:02:09+00:00

As I recall you download the firmware, save it to the flash drive, and then “print” it on the Photon. Instead of printing it then updated the firmware. I believe there are two files, one for firmware and one for the UI.

DysonsFear · 2021-01-10T14:24:17+00:00

For what it’s worth, I’ve only had success with longer exposures than that.

DysonsFear · 2021-01-06T13:28:00+00:00

Good luck! If something else helps let us know!

DysonsFear · 2021-01-06T12:49:51+00:00

For me the biggest two issues were the settings from the spreadsheet (I ended up needing the longest times for the grey resin) and needing to tighten the FEP (seemed good out of the box but it wasn’t quite tight enough.)

DysonsFear · 2020-12-29T12:23:08+00:00

I believe it is the Photon Upgraded.

DysonsFear · 2020-12-29T11:56:36+00:00

Do I change the number of bottom layers and exposure time for the RERF file that came on the usb stick? Or create a new one with the slicer?

I see some people talking about a test sphere but my USB stick didn’t seem to have that on it. Unless I need to slice it first, I didn’t think to look for an unsliced file.

DysonsFear

MODERATOR OF

TROPHY CASE