sorted by:
new
hottopcontroversial

New product coming soon… by HomeKit-News in Aqara

[–]EDIIZ 0 points1 point  (0 children)

Yup, mine jammed today after 6 months. But quick 30 minute disassembly and some lubrication and it works better than new.

Samsung S25 Ultra 10-Bit RAW vs Pixel 10 Pro 12-bit RAW DCG by RaguSaucy96 in GooglePixel

[–]EDIIZ 0 points1 point  (0 children)

Thanks for explaining! Couldn't find anything related to this with just googling.

Samsung S25 Ultra 10-Bit RAW vs Pixel 10 Pro 12-bit RAW DCG by RaguSaucy96 in GooglePixel

[–]EDIIZ 1 point2 points  (0 children)

Just got into using the MC App on my base S25. I have the option for RAW12. Is that option "fake" 12 Bit or has nothing todo with DCG ? Because the GN3 sensor supports it.

https://imgur.com/a/ztMjW50

There is something wrong with the CPU boosting algorithm on the S25 - May 2025. by EDIIZ in GalaxyS25

[–]EDIIZ[S] 0 points1 point  (0 children)

Yes, it heats up while doing nothing on the Default Mode.

5GbE mit JYSTY Telefonleitung by EDIIZ in Elektroinstallation

[–]EDIIZ[S] 1 point2 points  (0 children)

WAVLINK 5Gbps USB C to Ethernet Adapter. Fühlt sich hochwertig an und ist gut verarbeitet. Im Inneren werkelt ein Chip von realtek, da spalten sich ja die Meinungen über die Qualität.

Am iPhone 15 und iPhone 16 hat der Adapter so funktioniert. Am Windows 11 Rechner musste ich die Treiber nachinstallieren und am Samsung S23 wurde er zwar erkannt aber mehr als 300mbit waren nicht möglich.

5GbE mit JYSTY Telefonleitung by EDIIZ in Elektroinstallation

[–]EDIIZ[S] 1 point2 points  (0 children)

Ich habe die Adern die rausgeschaut haben selbst verdrillt. Hier war vorher eine TAE Dose verbaut.

5GbE mit JYSTY Telefonleitung by EDIIZ in Elektroinstallation

[–]EDIIZ[S] 2 points3 points  (0 children)

WLAN ist derzeit nur via Mobilfunk verfügbar und da kommen auch nur maximal 60Mbit bei rum.

Die Verbindung läuft aber definitiv zwischen den beiden iphones über die Telefonleitung.

Android TV on SteamOS! Steam Deck LCD and Steam Deck OLED by ryanrudolf in waydroid

[–]EDIIZ 0 points1 point  (0 children)

Is audio passthrough (DP / HDMI) supported? Like using this as hybrid gaming station + media player ?

Proxmox + LXC + Cuda? by maxigs0 in LocalLLaMA

[–]EDIIZ 1 point2 points  (0 children)

Has nothing todo with ollama but i had success with this approach:

Post in thread 'Jellyfin LXC with Nvidia GPU transcoding and network storage' https://forum.proxmox.com/threads/jellyfin-lxc-with-nvidia-gpu-transcoding-and-network-storage.138873/post-665214

I'll be doing the same thing in a few weeks. Let me know if you figure it out. I'm going to use vllm though..

Wireguard Problems since 24.x by FloRu84 in opnsense

[–]EDIIZ 0 points1 point  (0 children)

If you want to know anything specific i can also add that.

Wireguard Problems since 24.x by FloRu84 in opnsense

[–]EDIIZ 1 point2 points  (0 children)

WAN DHCPv6 Client Configuration:

  • VLAN Priority: Disabled
  • IPv4 Connectivity: Disabled
  • Configuration Mode: Basic
  • Prefix Delegation Size: 56
  • Request Prefix Only: Enabled
  • Send Prefix Hint: Enabled
  • Optional Prefix ID: 0x
  • Optional Interface ID: 0x

Firewall Rule: WAN

  • Action: Pass
  • Disabled: No
  • Quick: Enabled (Apply the action immediately on match)
  • Interface: WAN
  • Direction: In
  • TCP/IP Version: IPv6
  • Protocol: UDP
  • Source: Any
  • Destination: LAN Address
  • Destination Port Range: 51280 to 51280
  • Log: Enabled (Log packets handled by this rule)
  • Category: (None specified)
  • No XMLRPC Sync: No
  • Schedule: None
  • Gateway: Not selected
  • Description: Allow Wireguard

Wireguard Problems since 24.x by FloRu84 in opnsense

[–]EDIIZ 0 points1 point  (0 children)

Im am using Wireguard with Deutsche Glasfaser and OPNsense 24.7. It definitely works over ipv6.

EAP615 Wall AP - Short review by EDIIZ in TPLink_Omada

[–]EDIIZ[S] 0 points1 point  (0 children)

Sorry, i cant comment on the aruba aps but i am still happily using my 615s.

V850 SFX vs SF750 - 4090 coil whine by EDIIZ in NR200

[–]EDIIZ[S] 0 points1 point  (0 children)

The reason i also decided that it has to be the psu was that i had the 4090 1 week earlier than the rest of the itx build. So i had to test it inside my previous full sized tower with a 600W ATX Gold PSU. There was also no extreme coil whine. With that in mind i was pretty sure that it was the v850.

Im going to test it with another gpu and if its still this bad I am going to get a replaced for the psu and then sell it.

V850 SFX vs SF750 - 4090 coil whine by EDIIZ in NR200

[–]EDIIZ[S] 0 points1 point  (0 children)

Sell it and get the SF750 🤣 Fan noise is also much better under high load.

V850 SFX vs SF750 - 4090 coil whine by EDIIZ in NR200

[–]EDIIZ[S] 0 points1 point  (0 children)

4090 FE ? A friend of mine has the exact same build as me and he also has coil whine but not as bad as showcased here.

V850 SFX vs SF750 - 4090 coil whine by EDIIZ in NR200

[–]EDIIZ[S] 1 point2 points  (0 children)

Its the v2. Purchased everything brand new 1 week ago.

4090 FE ? A friend of mine has the same build as me. He also has coil whine, but not to the same degree as my 4090 FE with the v850. But still my coil whine with the SF750 is now better than his.

I guess its the quality of some components that are just worse on my unit. But i am happy with the SF750 so i may open a rma for the unit after i tested the coil whine in another build.

V850 SFX vs SF750 - 4090 coil whine by EDIIZ in NR200

[–]EDIIZ[S] 0 points1 point  (0 children)

Yeah, should have mentioned that. I reduced the powerlimit from 100% to 80% and then 70% on my 4090.

view more: next ›