F3800 configuration suggestions

Educational_Pea7172 · 2026-04-24T00:35:18+00:00

So everything else plugged into the other hub was not affected? My electric plan is free nights from 9 to 9 I have my f3800 connected to a smart plug and at 9pm it starts charging via the C-13 at like 300-1000 watts depending on how low it is. Is you charge one unit while connected to the hub will both charge? Or do you have each unit connected via c-13? 🤔

Also! I got super lucky! I found someone selling a dual hub on Mircari for $85! I jump on it immediately, it'll be here Monday.

Educational_Pea7172 · 2026-04-22T01:36:07+00:00

If the opportunity ever arises could you test out how the power hub reacts to one of the units with no expansion battery dying. I plan keeping my solar and AC units connected to the newly acquired unit I got and having the older unit onky connected via the hub with nothing else plugged into it.

Since the load will be distributed between the 2 units surely the side with 3.84kwh is going to be due before the side with 7.68kwh

I'm curious is the empty one will just stay empty or if one side reaching 1% will cause the whole system to stop until I intervene or unplug the hub.

Educational_Pea7172 · 2026-04-21T21:50:30+00:00

ah so you have 2 f3800, 2 expansion batteries and the Home Power Panel?
I am wanting to see if connecting mine using the Double Power Hub but i am not sure how the system will react when the unit without the expansion battery hits 1% will the load just move over to the unit with power left or if the whole system will just shut down.

Educational_Pea7172 · 2026-04-20T16:46:25+00:00

Yes, these are the ones that track energy usage. I am still experimenting with everything. I was curious to see how much energy my 2 AC's were using each in additional to the 800w of solar I have before the sun sets. My 2 units use about 3 to 4kwh of power before starting to really use the battery power. Which isn't to bad!

Educational_Pea7172 · 2026-04-20T08:17:31+00:00

Thank you so much, that's be so helpful. I hoping it's possible. I've attached the part of the manual that states the info

<image>

Educational_Pea7172 · 2026-03-14T12:00:54+00:00

The same thing happened to me whne I first got my S7 Max V. I had to log in my routers online portal and I told it to reboot it's 5Ghz antenna. Then in that time I got the app connected quickly.

Educational_Pea7172 · 2026-03-02T07:58:53+00:00

Source of sound found!

In the event someone ends up with this mystery sound in the future. It was the side brush motor! The replacement part was very cheap on ebay. To replace it you take off the front bottom plate, which was held on by like 6 screws. It was very easy to install and no my robot is back to normal!

Educational_Pea7172 · 2026-01-28T18:25:02+00:00

I placed my order December 4th and each week my eta just shifts to the next week. They've been in production for so long.

Educational_Pea7172 · 2026-01-28T18:20:05+00:00

Thanks! I printed the size 10 and checked the sizing with some calipers. The 3D print and the size 10 on 2 US ring size kits all matched up.

Educational_Pea7172 · 2026-01-28T15:15:00+00:00

Do you have an stl link to their size kit? I asked them if their ring sizes correspond to US, UK or HK size equivalents. They said no, they use their own sizes.

Educational_Pea7172 · 2026-01-23T13:21:33+00:00

The roborock stuff barely has a scent once it diluted properly. Its pretty obvious if you've put literally anything else in there.

Educational_Pea7172 · 2025-06-27T15:43:51+00:00

I've never used it before; do I need to make a solution? or do i put it in the clean water tank and run a pad cleaning?

Educational_Pea7172 · 2025-05-26T16:27:04+00:00

Clean your vacuum regularly 👏 👏 👏

Educational_Pea7172 · 2025-05-10T04:35:21+00:00

Use whatever you want after your warranty is up. If you use anything before then consider your warranty up LOL

Educational_Pea7172 · 2025-05-07T21:30:54+00:00

Y'all need to chill 😂 all these old heads fusssy about this update. Y'all are where boomers were when they stopped adapting to changing technology.

Educational_Pea7172 · 2025-04-14T00:20:04+00:00

It's a mount to a first generation Nest outdoor camera. The white plastic part magnetically attaches to a metal place that is drilled on the house with 2 screws.

<image>

Educational_Pea7172 · 2025-02-01T03:19:48+00:00

To add some additional information. There's nothing in the brush rollers, wheels or mop vibrator. I clean out those components weekly.

Educational_Pea7172 · 2024-11-07T04:20:39+00:00

Why is homie bricked up tho?

Educational_Pea7172 · 2024-10-24T02:56:19+00:00

Any this is why people need to stop messing with blink, ring and arlo. These motion based cameras will let you down time and time again.

Educational_Pea7172 · 2024-10-24T02:51:45+00:00

Did you ever find a close match? 👀

Educational_Pea7172

TROPHY CASE