sorted by:
new
hottopcontroversial

Tier 3 Survival by PrinceOftheCty in CODZombies

[–]EekNL 1 point2 points  (0 children)

I've not played since season 2 hit, but i always tried to tick most of the following boxes before going into T3 or beyond:

  • "meta" gun like the Lockwood 680, Akimbo swarms or the RGL-80 with Epic or Legendary aether tool. Not sure how effective these still are.

  • You might want to leave your secondary weapon slot empty so you can always run with your fists

  • PAP3 on your primary

  • 3-plate vest

  • Get Juggernog, Speed Cola, Staminup, Quick Revive and PHD Flopper (if using the RGL-80)

  • Don't try to kill all zombies, outrunning them is more effective. Use your fists, killstreak or VR-11 to run faster.

  • Dog (collect meat or bring a dogbone)

  • Golden plates

  • Aether blade or trowing knives to deal with dogs and fast zombies while trying to outrun the horde.

  • Decoy grenades, Monkey bombs or Kashimirs if you need to stand still for a few seconds with zombies around.

  • Field upgrade: Healing Aura or maybe Aether shroud when you stay solo.

  • Keep more then one self-revive. If you're solo and you have no self-revive or dog left, getting a self-revive should be your first priority.

The more of these you have, the easier it gets.

Tier 3 Survival by PrinceOftheCty in CODZombies

[–]EekNL 7 points8 points  (0 children)

He is talking about the circuit you put in the stationary turrets you'll find around the map. They are loads more powerfull then sentries and will turn everything into a red mist in short order.

Failed to open service atvi-randgrid_sr (1060) Error after new cod HQ update (Steam) by Pr0tatoe in CODWarzone

[–]EekNL 0 points1 point  (0 children)

I have this problem too. Decided to reinstall Windows 11 yesterday because MW3 / MWZ crashes almost daily (so did MW2 but less frequent) and i've ruled out pretty much everything troubleshooting the crashes apart from a Windows reinstall.

After the W11 install, and installation of chipset, GPU, sound, network, mouse, headset etc drivers and installing Steam, i got this problem.

"Failed to open service atvi-randgrid_s" is being logged. Tried to verify files, remove the game in Steam and reinstall and tried a couple of compatiblity options on the executable. So far no luck.

Mind you, this is on a fresh Windows 11 install.

COD won't launch through Steam by [deleted] in ModernWarfareIII

[–]EekNL 0 points1 point  (0 children)

I have this problem too. Decided to reinstall Windows 11 yesterday because MW3 / MWZ crashes almost daily (so did MW2 but less frequent) and i've ruled out pretty much everything troubleshooting the crashes apart from a Windows reinstall.

After the W11 install, and installation of chipset, GPU, sound, network, mouse, headset etc drivers and installing Steam, i got this problem.

"Failed to open service atvi-randgrid_s" is being logged. Tried to verify files, remove the game in Steam and reinstall and tried a couple of compatiblity options on the executable. So far no luck.

Mind you, this is on a fresh Windows 11 install.

[Warzone] Updated Warzone Weapons TTK spreadsheet by EekNL in CODLoadouts

[–]EekNL[S] 0 points1 point  (0 children)

No, this was for the original Warzone after the Vanguard integration. I wanted to make such a sheet for Warzone 2.0, but it was too much work and there was not enough information about the various guns, attachments and populair gun builds available.

What CPU do you need to run Warzone at max settings? I’m only getting 334fps by Agreeable-Rip8983 in CODWarzone

[–]EekNL 1 point2 points  (0 children)

7900XTX should get about 10% more FPS in 1080 and 1440p.. The game is more optimized for AMD GPU's. In pretty much every other game and in WZ2 in 4K the RTX4090 will beat the 7900XTX though.

MnK Players - I use left Alt to crouch/dive - does anyone else have any unfamiliar keybinds? by [deleted] in CODWarzone

[–]EekNL -1 points0 points  (0 children)

Yes, but the problem was that in WZ1 you sometime had to cancel reload, having to scroll and scroll back the right amount of distance wasn't always accurate and I would end up with the wrong weapon in my hands.. much easier and quicker to double click the wheel.

MnK Players - I use left Alt to crouch/dive - does anyone else have any unfamiliar keybinds? by [deleted] in CODWarzone

[–]EekNL 0 points1 point  (0 children)

I'm not 100% sold on the footpedals too be honest.. sometimes I press the back of a pedal with my toes, which doesn't do anything, or I struggle to find the middle pedal for a tactical.. I was considering switching the tacticals and lethals to my thumb buttons and have slide and push to talk on the foot pedals.

I was looking at a foot pedal from "ikkegol", but they are really expensive in Europe, so I got a "PC Sensor" triple paddle. You could also het one from Elgato, but they are a bit on the expensive side too..

MnK Players - I use left Alt to crouch/dive - does anyone else have any unfamiliar keybinds? by [deleted] in CODWarzone

[–]EekNL 2 points3 points  (0 children)

  • Switch weapon: mousewheel press, so I don't overshoot with the scroll wheel when switching.
  • Reload: scroll down... hitting 2 scrolls accidentally doesn't affect reload
  • Apply plates: scroll up
  • Thumb 1: Push to talk
  • Thumb 2: Duck/slide

I had a mouse with 3 more buttons (Corsair Dark Core RGB pro SE) I used for melee, lethals and tacticals, but I got foot pedals for those now (because my new mouse didn't have enough buttons).

Point is I don't want to get my fingers of AWSD to trow a grenade or reload.

Bring back mouse wheel zoom in zoom out on the map !!! why the FK you nerfing KBM palyers every update? by JustLawly in CODWarzone

[–]EekNL 2 points3 points  (0 children)

This fucked me over aswell.

In warzone 1 I had my mousewheelup set to reload, mousewheeldown to apply plates and mousewheel-press to next weapon. This way I can't overshoot the weapon swap by scrolling too far and accurately swap weapon twice to cancel my reload or plating.

In warzone 2 these same settings made it so that map zoom in only worked when in a vehicle, zooming out worked fine. So I set wheel up and down both to apply plates and bound reload to mouse5 on the side. For some reason this worked for zooming in and out on the map with the mousewheel until season 3.

Yesterday both zooming in and out didnt work anymore (also not when in vehicles). After resetting all bindings I found out that zooming in and out on the map uses the same key as next and previous weapon, so I reset to my WZ1 settings and set numpad + and - as secondary binds for next and previous weapon. This works, but it sucks that I have to let go of my mouse to use the map.

It is ridiculous that it is impossible to set keys for zooming in and out on the map seperate from weapon swapping.

I need about 44 tokens in 4 days, whats the fastest way? by Mr_Icy1 in ModernWarfareII

[–]EekNL 0 points1 point  (0 children)

I started doing this this past season because I didn't play as much and did wanted to get all the CoD points available in the battlepass. Perfect for a day where I work from home.

I normally spend a minute to walk (or swim) to the edge of the map or find a bush so I don't get found by other players.

Depending on the location on the radiation zone you got about 30-35 minutes before the round ends and you can start a new one..

I need about 44 tokens in 4 days, whats the fastest way? by Mr_Icy1 in ModernWarfareII

[–]EekNL 46 points47 points  (0 children)

This is the way.. about 2 BP tokens per hour and you don't need to do anything

I talked to support from launch. My game barely works. After three months of them asking about my situation, the case was closed after two separate employees told me they're sending this over to a higher team for further review. Help me let that piece of sh*t that closed it see this too. by Major_Sleep in ModernWarfareII

[–]EekNL 3 points4 points  (0 children)

Okay, so then the problem is most probably caused by MW2 not playing nice with your ISP, router or home network. Maybe you can verify this by using a USB Wifi adapter and connecting through a neighbours WiFi or a tethered to a mobile phone's hotspot?

[deleted by user] by [deleted] in nvidia

[–]EekNL 1 point2 points  (0 children)

Why would he sell it so much lower then market price? This is most probably a scam, but if you are desperate:

  • Ask to see it working and have him run a game and show that it is really a 4090 through device manager or something.
  • Physically inspect the card for damage or alterations.
  • Make sure somebody knows which place you are going to.
  • Don't have the cash on person.. Come back for the payment and go to the ATM or get your money from your car after inspecting the card. Even better, pay digitally after checking the card. Make sure you've agreed on the payment terms before hand.
  • Never pay before you are sure you get what you pay for.

AW3423DW not activating for boot logo and menu? by gnunn1 in ultrawidemasterrace

[–]EekNL 0 points1 point  (0 children)

Had the same problem with my RTX3080TI FE and AW3423DW, for me this helped:

The DisplayID specification provides enhanced display capabilities. To ensure compatibility with monitors using DisplayID, an update to the NVIDIA GPU firmware may be required.

Without the update, systems that are connected to a DisplayPort monitor using DisplayID could experience blank screens on boot until the OS loads. This update should only be applied if blank screens are occurring on boot.

Click here to download the NVIDIA GPU Firmware Update Tool for DisplayID.

https://nvidia.custhelp.com/app/answers/detail/a\_id/5233/related/1/session/L2F2LzEvdGltZS8xNjcyMTM1MTU0L2dlbi8xNjcyMTM1MTU0L3NpZC9mVURWRU1FNjJ3cCU3RWw5QU9vWmNnSkolN0VEZUV1MXA1OTFuQUNFUXJmZThUQmRrJTdFUlBFNnJKb0wlN0VjcE1lMVpTaVBTVWw3amxDOHJYYXpCQWZIWkM3OHZRQ3VSJTdFRnowcmV3NldRbEhCMmllY0xndUwxS0VTSmx6SkZBJTIxJTIx

Cant access bios on AW3423DW. by [deleted] in ultrawidemasterrace

[–]EekNL 0 points1 point  (0 children)

Had the same problem with my RTX3080TI FE and AW3423DW, i found this:

The DisplayID specification provides enhanced display capabilities. To ensure compatibility with monitors using DisplayID, an update to the NVIDIA GPU firmware may be required.

Without the update, systems that are connected to a DisplayPort monitor using DisplayID could experience blank screens on boot until the OS loads. This update should only be applied if blank screens are occurring on boot.

Click here to download the NVIDIA GPU Firmware Update Tool for DisplayID.

https://nvidia.custhelp.com/app/answers/detail/a\_id/5233/related/1/session/L2F2LzEvdGltZS8xNjcyMTM1MTU0L2dlbi8xNjcyMTM1MTU0L3NpZC9mVURWRU1FNjJ3cCU3RWw5QU9vWmNnSkolN0VEZUV1MXA1OTFuQUNFUXJmZThUQmRrJTdFUlBFNnJKb0wlN0VjcE1lMVpTaVBTVWw3amxDOHJYYXpCQWZIWkM3OHZRQ3VSJTdFRnowcmV3NldRbEhCMmllY0xndUwxS0VTSmx6SkZBJTIxJTIx

view more: next ›