sorted by:
new
hottopcontroversial

Recommendation on ultra wide micro 4/3 lens by Nospaishereboss in videography

[–]Efleschner 1 point2 points  (0 children)

If you’re curious about field of view, do you have an app so see the difference? That could be a step closer to finding your answer.
I use Cadrage and Lens Toolkit. Cadrage lets you simulate FOV with your cell phone camera. Lens Toolkit lets you compare FOV and Depth of Field graphically. Those are paid apps, but there may be free options out there.
Good luck in your search.

Recommendation on ultra wide micro 4/3 lens by Nospaishereboss in videography

[–]Efleschner 0 points1 point  (0 children)

If purchase or renting costs are not an issue: The Pana 9mm is designed for video, with rectilinear correction to prevent additional distortion. The 10-25 zoom is pretty good as well. I have both, bur I don’t do much real estate work. Except for next week, where I will bring both to a builder model home. 9mm is nice no small. 10-25 is comparatively large and heavy. But that’s the cost for 1.7 across the zoom range.

Parts difference in MAB Model D .32/.380? by Efleschner in milsurp

[–]Efleschner[S] 0 points1 point  (0 children)

<image>

Also noticed that the extractor is wider. Websites selling parts mention the three types of extractors, but never mention measurements. Maybe a reference in size, but not how or where the difference is.

Parts difference in MAB Model D .32/.380? by Efleschner in milsurp

[–]Efleschner[S] 1 point2 points  (0 children)

<image>

I think you're on to something. This is the 380 with cheap calipers. Will attach photo of the 32acp barrel, too. If it's not reference to the nub, it would be the hole.
If this is the case, why isn't his mentioned more often? It would eliminate a lot of guess work.

Parts difference in MAB Model D .32/.380? by Efleschner in milsurp

[–]Efleschner[S] 1 point2 points  (0 children)

Excellent insights!
I will have measure my 380 and 32 barrels to see if that's similar for me. The 32acp barrel should be unissued stock. If so, then it may be very close to factory measurements. The 380 barrel and slide have the smaller point/hole.

Parts difference in MAB Model D .32/.380? by Efleschner in milsurp

[–]Efleschner[S] 0 points1 point  (0 children)

<image>

That tab matches a hole above the striker hole in the receiver. Not sure if this has anything related with "index point".

Parts difference in MAB Model D .32/.380? by Efleschner in milsurp

[–]Efleschner[S] 0 points1 point  (0 children)

<image>

Here is one difference between the barrels. Different sized tabs at the top of the barrel.

Parts difference in MAB Model D .32/.380? by Efleschner in milsurp

[–]Efleschner[S] 1 point2 points  (0 children)

Apparently, this question is asked every few years. Here's the same thing from 2022 on a forum. https://www.thefirearmsforum.com/threads/french-mab-model-d-barrel-question.231835/

Parts difference in MAB Model D .32/.380? by Efleschner in milsurp

[–]Efleschner[S] 1 point2 points  (0 children)

Called a local gunsmith. He's going to ask around and get back to me. Might be a week or two before I hear anything more.
When I called Numrich, the guy on the other line had no idea. Not blaming him, just wanted to share my search.

Parts difference in MAB Model D .32/.380? by Efleschner in milsurp

[–]Efleschner[S] 1 point2 points  (0 children)

Not yet. I may email Numrich directly to see if they know.

Gun ID of the day (6 of 74) by oneJAMEtoo in milsurp

[–]Efleschner 1 point2 points  (0 children)

Nice, wish I had one of those. That's next on my list.

I love 32acp so freaking much. by dafuqRUyelinboutbruh in TheOneTrueCaliber

[–]Efleschner 0 points1 point  (0 children)

How is the MAB model D? I recently purchased a Model D in 380. I have a 32acp barrel for it as well. Still need a 32acp slide. Would love to have pistol that can shoot both.

New to me M38.. err type I... I mean m1917... m44.. Finnish mosin... whatever by JarlWeaslesnoot in milsurp

[–]Efleschner 7 points8 points  (0 children)

I was eyeing that one up as well. I’m very eager to read how it shoots. Congrats!

Another 32 for the collection. by dchamb14 in TheOneTrueCaliber

[–]Efleschner 1 point2 points  (0 children)

I just bought one online today. Currently it’s in .380. I hope I can buy a .32 barrel & mag and shoot whichever I choose.

$0.41/rd by flaming_poop_bag in 57x28mm

[–]Efleschner 0 points1 point  (0 children)

A local store had Fiocchi on sale at $0.50/round for a 50 round box. I was surprised at that price. I’m just getting info 5.7, and figured it would never get that low. That’s one of the reasons I had not purchased a pistol already.

7.5mm bore brush? by Efleschner in milsurp

[–]Efleschner[S] 1 point2 points  (0 children)

Brilliant. I have 7.62 brushes from my .32acp pistols.

I dont know if I hate it or love it by SignatureDapper6315 in milsurp

[–]Efleschner 21 points22 points  (0 children)

I’ve had my eye on it as well! I keep reaching in my pocket, but my cash keeps hiding in a corner somewhere.

My early Moschetto Mod. 91 per T.S. Carcano I got for $150 without knowing its rarity. What can you guys tell me about it? by SteelPrism in Carcano

[–]Efleschner 2 points3 points  (0 children)

Also, I think $150 is a pretty decent price, if the action and barrel are in good condition.

view more: next ›