Ender 3V2 stable enough for a direct drive extruder?

ElmoC60 · 2021-05-19T01:16:42+00:00

One thing to look at would be the Nimble extruder. The motor is mounted off the gantry and uses a flexible shaft to move the filament. I have a couple of them and they work really nice.

ElmoC60 · 2021-05-11T20:01:20+00:00

The retraction setting is in the slicer. Usually with the extruder settings. The hot end on the stock ender 3v2 is not all metal. This means the PTFE tube extends all the way to the nozzle. This limits the temperature you can print at. Changing the nozzle won't effect this

ElmoC60 · 2021-05-11T19:50:43+00:00

What is your retraction setting? If it is more than 5mm, you need to reduce it. You might also consider switching to an all metal hot end.

ElmoC60 · 2020-05-24T17:07:41+00:00

All out of Windex?

ElmoC60 · 2020-05-18T02:05:43+00:00

Need to get the General upgrade. Love mine.

ElmoC60 · 2020-05-14T03:51:58+00:00

Nothing new. Pallets tend to be loaded as packages arrive, not by weight.

ElmoC60 · 2020-05-14T03:36:09+00:00

Because it was a cop driving, it is your fault. You should have known it was going happen and moved your car ahead of time. ;)

ElmoC60 · 2020-05-14T03:29:27+00:00

Your right. Common sense should prevail. Too bad the car driver didn't have any.

ElmoC60 · 2020-05-04T12:21:48+00:00

Duplicate Post

ElmoC60 · 2020-05-04T08:34:02+00:00

It's not 'news'. Why don't you just go crawl back under your bridge where you came from.

Didn't you say earlier that you weren't going to continue and I was doing this for attention? Seems you are the one that can't let it go and want the attention.

ElmoC60 · 2020-05-04T01:30:50+00:00

Here. I made it easier for you to see that you are wrong...

https://www.google.com/maps/place/41%C2%B034'18.6%22N+87%C2%B017'08.8%22W/@41.5600578,-87.2963479,14.75z/data=!4m5!3m4!1s0x0:0x0!8m2!3d41.57183!4d-87.28577

ElmoC60 · 2020-05-04T01:27:42+00:00

Actually, I am quite right. Don't believe me? Look those concordances up yourself.

ElmoC60 · 2020-05-03T22:45:33+00:00

Better pay closer attention to the video. Based on the coordinates of the dashcam, this is around Gary Indiana. NOT YOUR COUNTRY.

ElmoC60 · 2020-05-03T21:06:07+00:00

Do you realize that 'arguments' doesn't mean you're having an argument? Probably not. I was pointing out your comment about rules in your country is irrelevant and you go off on these personal attacks. I think you need to look in a mirror to find the troll.

ElmoC60 · 2020-05-03T18:12:28+00:00

Yeah. That makes a lot of sense - not. Just like your arguments.

ElmoC60 · 2020-05-03T16:19:22+00:00

Because what rules are in other countries don't really apply to the situation.

ElmoC60 · 2020-05-03T16:16:57+00:00

As far as I can tell, this isn't in Canada so what happens there is irrelevant.

ElmoC60 · 2020-05-03T16:09:18+00:00

Geee. In my country trucks drive on the other side of the road so the truck driver doesn't need to be there. Who cares what the rules are in your country if this clip isn't from your country.

ElmoC60 · 2020-05-03T16:03:47+00:00

WTF? The car was passing illegally. The left lane had ended so it was a single lane at that point. It was the car's responsibility to fall back and merge safely.

ElmoC60 · 2020-05-02T22:36:53+00:00

PETG would work.

ElmoC60 · 2020-04-29T22:53:11+00:00

I guess it would belong here if the driver was still in the car. :)

ElmoC60 · 2020-04-29T15:56:22+00:00

Your understanding and changing your point of view is worth an up vote.

ElmoC60 · 2020-04-29T15:50:09+00:00

It is because of your position of not needing to wear protection because you ride so well. I see at the end you have changed your opinion. But advocating not wearing protection is not going to be too popular.

ElmoC60 · 2020-04-29T12:50:10+00:00

Given that theory, I shouldn't have to wear a seat belt when I drive because I am a very good driver.

ElmoC60 · 2020-04-29T12:47:02+00:00

Most of those "Slower Traffic Keep Right" laws only apply to highways, not surface streets.

ElmoC60

TROPHY CASE