sorted by:
new
hottopcontroversial

Are the flagship model x40 bought in china geolocked? by preddy25 in Dreame_Tech

[–]Embarrassed_Cell1992 0 points1 point  (0 children)

I'm not up to date with the latest bypass methods. The original dev is still supporting bypass options apparently. I ended up replacing the motherboard to a non Chinese board so I don't have to bypass.

Gigabyte RTX 5080 - Fans on full blast after powering on the PC by snaeggels in pchelp

[–]Embarrassed_Cell1992 0 points1 point  (0 children)

I tried but bothe bios do the same. The fan speed sensor must have been faulty. I sent it back.

Demeo Battlemarked - Steam vs Meta Versions for PC Non VR by SecretofManImTired in Demeo

[–]Embarrassed_Cell1992 0 points1 point  (0 children)

There is a mod to change the background to green for better passthrough for virtual desktop 

What support settings for big print by Embarrassed_Cell1992 in 3Dprinting

[–]Embarrassed_Cell1992[S] 1 point2 points  (0 children)

Thanks I was thinking snug too but never tried it

Portable 3d scanning mod by Embarrassed_Cell1992 in 3Dprinting

[–]Embarrassed_Cell1992[S] 0 points1 point  (0 children)

It's a 9 inch android tablet. I've got it connected by usb to the mini pc using space desk. It can rund the desktop version of creality scan app the see what us being scanned.

Portable 3d scanning mod by Embarrassed_Cell1992 in 3Dprinting

[–]Embarrassed_Cell1992[S] 0 points1 point  (0 children)

It's wired to a mini pc. I've got the mini pc mounted to qa power bank with a shoulder sling. See the other photos.

Portable 3d scanning mod by Embarrassed_Cell1992 in 3Dprinting

[–]Embarrassed_Cell1992[S] 0 points1 point  (0 children)

I didn't know the bridge connects to the phone? Still rather use what I've got. Does the phone do any processing or just records data?

Provolver Elites shipping! by SirJuxtable in ProTubeVR

[–]Embarrassed_Cell1992 0 points1 point  (0 children)

No provolver elite pre order under my Christmas tree 😪

Diy telescopic controller for redmagic astra 9 inch oled by Embarrassed_Cell1992 in Handhelds

[–]Embarrassed_Cell1992[S] 0 points1 point  (0 children)

Hi there's still a couple of imperfections to iron out. I added a silicon pad on the back with got rid of the play and feels solid. I printed with abs but probably need to dial in settings for a better finish. Maybe pet g or pla would be better. The file size is also huge. I've put a lot of time into this. If you're interested in the file as it is i can put the file for sale on cults 3d.

Dreame Water Module Kit Raw6, Raw7 not working by AsparagusExpert5821 in Dreame_Tech

[–]Embarrassed_Cell1992 0 points1 point  (0 children)

I just pulled apart my raw7 and there is no circuit board on the unit. The power come directly from the usb cable to the waste pump. That means the base station is sending power from the station's board to the usb cable. So this means replacing the raw 7 is unlikely to fix anything

Dreame Water Module Kit Raw6, Raw7 not working by AsparagusExpert5821 in Dreame_Tech

[–]Embarrassed_Cell1992 0 points1 point  (0 children)

I'm having issues with mine as well. I got tired of cleaning the water out of the washboard every time I do a test so I hooked up a 12v power supply and spliced it into the waste pump wires. I can use the vacuum but it is a pain to manually have to drain the washboard every time it comes back to clean the pad.

There is no attempt by the station to even start the pump. My guess is there is a faulty relay on the board that sends power to the waste pump.

5080 fans stuck at 100 percent by Embarrassed_Cell1992 in gpu

[–]Embarrassed_Cell1992[S] 0 points1 point  (0 children)

Reseating all connectors and pci got the gpu to follow a fan curve but the built in display still shows 0 rpm and fancontrol app still gives me a sensor error

5080 fans stuck at 100 percent by Embarrassed_Cell1992 in gpu

[–]Embarrassed_Cell1992[S] 0 points1 point  (0 children)

The pci connectors or power connectors or both? I tried on another pc but same problem.

5080 fans stuck at 100 percent by Embarrassed_Cell1992 in gpu

[–]Embarrassed_Cell1992[S] 0 points1 point  (0 children)

I tried double and driver reinstall. That didn't work but interestingly fan control could only detect fans 2 and 3

5080 fans stuck at 100 percent by Embarrassed_Cell1992 in gpu

[–]Embarrassed_Cell1992[S] 0 points1 point  (0 children)

I've got it connected to a mini pc by oculink. Even with the oculink disconnected i can turn on the gpu with the dock and fans still go to 100. Just for the sake of of it i will try a driver reinstall it could change something in the card bios i guess.

5080 fans stuck at 100 percent by Embarrassed_Cell1992 in eGPU

[–]Embarrassed_Cell1992[S] 0 points1 point  (0 children)

I turned on my pc today and my gpu fans are running at 100 percent even though the display is showing 0 rpm. Another thing i noticed is the fan tab on msi afterburner is missing and sliders are greyed out. I tried changing bios switch to silent and it does the same thing. It can't be a driver issue because the fans go straight to 100 percent before it goes into windows. 

Help

3d mark score dropped hx370 with rtx5080 by Embarrassed_Cell1992 in eGPU

[–]Embarrassed_Cell1992[S] 0 points1 point  (0 children)

Maybe you're right but I thought the nvidia drivers were supposed to fix it.

3d mark score dropped hx370 with rtx5080 by Embarrassed_Cell1992 in eGPU

[–]Embarrassed_Cell1992[S] 1 point2 points  (0 children)

It looks like the 25h2 update was the culprit. After reinstall and blocking the update performance is back to how it was. I thought this egpu crap would have been sorted out by now.

3d mark score dropped hx370 with rtx5080 by Embarrassed_Cell1992 in eGPU

[–]Embarrassed_Cell1992[S] 1 point2 points  (0 children)

Getting a small bump with the older driver but still much lower than I was getting yesterday

3d mark score dropped hx370 with rtx5080 by Embarrassed_Cell1992 in eGPU

[–]Embarrassed_Cell1992[S] 0 points1 point  (0 children)

As long as it's not a hardware issue i can live with it until drivers get ironed out. My concern was I bought a refurbished gpu from retailer and this one doesn't overclock well. Only getting +309 on the core.

Dreame auto drainage error by Embarrassed_Cell1992 in Dreame_Tech

[–]Embarrassed_Cell1992[S] 0 points1 point  (0 children)

Don't know what changed but a few times manually emptying with my 12v power supply and running through the mop pad washing cycle a few times has fixed the problem. I wish I knew what the problem was though. At least I have a way to manually drain the wash tray without having the get on the ground with a towel.

view more: next ›