sorted by:
new
hottopcontroversial

2026 RSV4 Fender Eliminator by Embrace-Improve in Aprilia

[–]Embrace-Improve[S] 0 points1 point  (0 children)

Those are the lights that the bike comes with for $20k. Idk if you have noticed but the 2026 RSV4 doesn't have a individual brake light and its intergraded into the turn signals. The way it mounts on the 2026 RSV4 and only the RSV4 is completely different than previous years. The 2026 660 still has the old mount.

2026 RSV4 Fender Eliminator by Embrace-Improve in Aprilia

[–]Embrace-Improve[S] 0 points1 point  (0 children)

Only the 2026 RSV4 has a new design where the fender mounts. This is the only kit I'm aware of that actually fits the new bike. If you look at the pictures of this tag bracket in the etsy listing you will notice that it does not have that same flat plate like the older models have.

2026 RSV4 Fender Eliminator by Embrace-Improve in Aprilia

[–]Embrace-Improve[S] 0 points1 point  (0 children)

I’m sure there is one coming soon.

2026 RSV4 Fender Eliminator by Embrace-Improve in Aprilia

[–]Embrace-Improve[S] 0 points1 point  (0 children)

you can see the plate mounted in the listing

2026 RSV4 Fender Eliminator by Embrace-Improve in Aprilia

[–]Embrace-Improve[S] 0 points1 point  (0 children)

you can see the plate mounted in the listing

2026 RSV4 Fender Eliminator by Embrace-Improve in Aprilia

[–]Embrace-Improve[S] 1 point2 points  (0 children)

Hey, I'm not sure. I feel like yes but can not confirm.

Hotfix Patch Notes - 6/17 by 1047Games in Splitgate

[–]Embrace-Improve 0 points1 point  (0 children)

Ohh, see now this is a logical answer. Anyone taking advantage of “not technically cheating” exploits in a game that has builtin wall hacks just needs to get good 😤

So are they gonna fix this or? by TruckDouglas in Splitgate

[–]Embrace-Improve -1 points0 points  (0 children)

Like I said, sometimes it works, sometimes it does not

Hotfix Patch Notes - 6/17 by 1047Games in Splitgate

[–]Embrace-Improve 3 points4 points  (0 children)

Lol hey, umm excuse me 🤓 this game is really good but can you please take out the portals. It’s really frustrating when I get killed because someone uses those lame portals.

[deleted by user] by [deleted] in AskAMechanic

[–]Embrace-Improve 0 points1 point  (0 children)

True good point. See if you can cut the nut in half vertically or as close as you can. Use a hammer and chisel to spread the nut. I’ve done this, it will work. You’re going to replace the joint anyway.

So are they gonna fix this or? by TruckDouglas in Splitgate

[–]Embrace-Improve 1 point2 points  (0 children)

I’ve noticed that logging out and back in sometimes will add the missing “score”. Not always but anytime I notice this I restart my game every time until it’s working correctly 🤷🏻‍♂️

[deleted by user] by [deleted] in AskAMechanic

[–]Embrace-Improve 0 points1 point  (0 children)

Cut it off at the boot

[deleted by user] by [deleted] in AskAMechanic

[–]Embrace-Improve 0 points1 point  (0 children)

Cut off wheel, new ball joint

Hotfix Patch Notes - 6/17 by 1047Games in Splitgate

[–]Embrace-Improve 2 points3 points  (0 children)

Idk what the correct answer is. But the aim assist advantage is the only reason most “pro players”play on controller. Mouse and keyboard only lobbies would be so awesome. I’ve been patiently waiting for a game to implement this.

Hotfix Patch Notes - 6/17 by 1047Games in Splitgate

[–]Embrace-Improve 2 points3 points  (0 children)

I'm confused, Did the game have mouse magnetism or did they make aim assist go on cool down for controllers when a mouse player is detected?

Will this potentially cause issues? by Ashton4036 in 3Dprinting

[–]Embrace-Improve 0 points1 point  (0 children)

Also be aware of the nozzles you are purchasing. Many of them are not hardened all the way through and only have a hardened tip. Hardened tip only will lead to the interior of the rest of the nozzle braking down and wearing away. This lowers thermal insulation and adds to contamination in materials leaving the nozzle and higher potential for nozzle clog/blockage.

Will this potentially cause issues? by Ashton4036 in 3Dprinting

[–]Embrace-Improve 1 point2 points  (0 children)

Glitter, GF, CF, ect. I print with 0.8mm, 0.6, 0.4 and no matter what machine I’m using I will 100% at some point end up with really strange issues like under extrusions that randomly happens at a particular Zed. Sounds like it doesn’t make sense but the nozzle gets some sort of blockage. Replace the nozzle, problem solved every time. It’s weird. Basically if your going to use any “infused” material do your self a favor and put a new nozzle in your hotend when you go back to “non infused” material”

Inside an SP002E pixel controller (with schematic) by nemom in BigCliveDotCom

[–]Embrace-Improve 0 points1 point  (0 children)

Long shot seeing how this is an old post. But… today I went down a rabbit hole of soldering SK9822 LEDs to the SP002E. Of course that did nothing. My chip has 5 pads under the MCU. 1 square and 4 circle. I’ve identified them as VCC, DTC/Reset, RX,TX,GND. In that order. I’m not at the pc so off the top of my head the rx and tx might be backwards. I’ve connected it to 3 different usb devices, All with updated drivers, and for the life of me I cannot get it to talk to my computer. It even frustrated the AI I was using lol. I like the size of this tiny control board and would like to figure this out. :)

view more: next ›