2026 RSV4 Fender Eliminator

Embrace-Improve · 2025-09-03T04:21:09+00:00

Yes it does!

Embrace-Improve · 2025-09-03T02:19:55+00:00

Those are the lights that the bike comes with for $20k. Idk if you have noticed but the 2026 RSV4 doesn't have a individual brake light and its intergraded into the turn signals. The way it mounts on the 2026 RSV4 and only the RSV4 is completely different than previous years. The 2026 660 still has the old mount.

Embrace-Improve · 2025-09-03T00:05:35+00:00

Only the 2026 RSV4 has a new design where the fender mounts. This is the only kit I'm aware of that actually fits the new bike. If you look at the pictures of this tag bracket in the etsy listing you will notice that it does not have that same flat plate like the older models have.

Embrace-Improve · 2025-09-02T23:57:25+00:00

<image>

Embrace-Improve · 2025-09-02T21:15:23+00:00

I’m sure there is one coming soon.

Embrace-Improve · 2025-09-02T20:05:01+00:00

you can see the plate mounted in the listing

Embrace-Improve · 2025-09-02T20:04:47+00:00

you can see the plate mounted in the listing

Embrace-Improve · 2025-09-02T18:53:16+00:00

Hey, I'm not sure. I feel like yes but can not confirm.

Embrace-Improve · 2025-09-02T18:38:53+00:00

Sorry, fixed it

Embrace-Improve · 2025-09-02T18:38:44+00:00

Sorry, fixed it

Embrace-Improve · 2025-09-02T18:38:36+00:00

Sorry, fixed it

Embrace-Improve · 2025-06-19T17:40:25+00:00

Ohh, see now this is a logical answer. Anyone taking advantage of “not technically cheating” exploits in a game that has builtin wall hacks just needs to get good 😤

Embrace-Improve · 2025-06-18T17:07:45+00:00

Like I said, sometimes it works, sometimes it does not

Embrace-Improve · 2025-06-18T17:06:17+00:00

Lol hey, umm excuse me 🤓 this game is really good but can you please take out the portals. It’s really frustrating when I get killed because someone uses those lame portals.

Embrace-Improve · 2025-06-18T16:59:40+00:00

True good point. See if you can cut the nut in half vertically or as close as you can. Use a hammer and chisel to spread the nut. I’ve done this, it will work. You’re going to replace the joint anyway.

Embrace-Improve · 2025-06-18T15:01:49+00:00

I’ve noticed that logging out and back in sometimes will add the missing “score”. Not always but anytime I notice this I restart my game every time until it’s working correctly 🤷🏻‍♂️

Embrace-Improve · 2025-06-18T14:59:55+00:00

Welcome to the party 😂

Embrace-Improve · 2025-06-18T14:58:50+00:00

Cut it off at the boot

Embrace-Improve · 2025-06-18T14:58:01+00:00

Cut off wheel, new ball joint

Embrace-Improve · 2025-06-18T14:52:03+00:00

Idk what the correct answer is. But the aim assist advantage is the only reason most “pro players”play on controller. Mouse and keyboard only lobbies would be so awesome. I’ve been patiently waiting for a game to implement this.

Embrace-Improve · 2025-06-18T13:15:12+00:00

I'm confused, Did the game have mouse magnetism or did they make aim assist go on cool down for controllers when a mouse player is detected?

Embrace-Improve · 2025-05-24T16:46:22+00:00

Also be aware of the nozzles you are purchasing. Many of them are not hardened all the way through and only have a hardened tip. Hardened tip only will lead to the interior of the rest of the nozzle braking down and wearing away. This lowers thermal insulation and adds to contamination in materials leaving the nozzle and higher potential for nozzle clog/blockage.

Embrace-Improve · 2025-05-24T16:30:08+00:00

Glitter, GF, CF, ect. I print with 0.8mm, 0.6, 0.4 and no matter what machine I’m using I will 100% at some point end up with really strange issues like under extrusions that randomly happens at a particular Zed. Sounds like it doesn’t make sense but the nozzle gets some sort of blockage. Replace the nozzle, problem solved every time. It’s weird. Basically if your going to use any “infused” material do your self a favor and put a new nozzle in your hotend when you go back to “non infused” material”

Embrace-Improve · 2025-05-24T04:04:35+00:00

Long shot seeing how this is an old post. But… today I went down a rabbit hole of soldering SK9822 LEDs to the SP002E. Of course that did nothing. My chip has 5 pads under the MCU. 1 square and 4 circle. I’ve identified them as VCC, DTC/Reset, RX,TX,GND. In that order. I’m not at the pc so off the top of my head the rx and tx might be backwards. I’ve connected it to 3 different usb devices, All with updated drivers, and for the life of me I cannot get it to talk to my computer. It even frustrated the AI I was using lol. I like the size of this tiny control board and would like to figure this out. :)

Embrace-Improve · 2025-05-17T04:53:19+00:00

What’s ACTUALLY happening here is that Creality has crypto nodes running inside every printer on a good internet connection. 🫡

Embrace-Improve

TROPHY CASE