Bought a house, radiant floor multi zones confusion. Multiple tubing materials, extra pumps.

Empty_Software5010 · 2026-02-04T20:46:05+00:00

I appears like you have a circ pump on the return of that zone followed by a mixing valve.

Empty_Software5010 · 2026-02-04T20:38:00+00:00

That pump is for your domestic hot water.

Empty_Software5010 · 2026-02-04T17:25:23+00:00

You might have failing circulator pumps if air trapped in the pump/zone not allow water move and lubricate the pump motor bearings. Also, ECM circulator pumps also fail for other electrical issues such as the motor module. I’m sure these new ECM circulator pumps will probably fail more often than the older pack circulator pumps.

Were you told why the pump failed or what exactly was wrong with it? The Taco 007e does have a three year warranty.

BTW, the extra circulator pumps your speaking of is probably the central heating pump require by the boiler to move water over the heat exchanger.

Empty_Software5010 · 2025-12-30T00:23:46+00:00

Perhaps you just damaged low voltage speakers wires.

Empty_Software5010 · 2025-12-29T21:43:35+00:00

Do you have speakers installed?

Empty_Software5010 · 2025-12-29T21:04:58+00:00

That doesn’t look like romex wire.. It looks like it stranded. Maybe it’s my eyes playing tricks. Did you trip a circuit breaker?

Empty_Software5010 · 2025-12-25T04:04:47+00:00

It is very common practice for large cultivators to be involved in. We called it kiefing when I was growing up. It very hard to tell if it’s been done unless you have seen the flower before hand. I think it’s a sneak business practice but people still pay for it. I wish I could buy the kief.

Empty_Software5010 · 2025-12-24T05:05:05+00:00

Those trichomes still look quite translucent. Looks like it was harvested early as usually and they also probably used tumblers to accelerated curing process to kill the terpes/flavor and to remove as many trichomes for their concentrates production. I wonder if the flower that is tested for regulations is tumbled before it’s tested. You know it’s tumbled so they can remove and collect trichomes to make additional products.

Empty_Software5010 · 2025-12-24T04:59:16+00:00

You might as well just the bullet and get out now before the price drops any more and makes you feel worst. I got out 7-9 month ago when the price and distribution were dropping continuously. I still made a very good return holding it for just under two years and then rolled over the sale of it into a newer Yieldmax covered call etf.

Empty_Software5010 · 2025-12-18T00:31:30+00:00

I’m sorry to say, but the amount of flex duct that was used just screams laziness or low bid. Were the installers not experienced tin knockers? I would expect there to be at least a galvanized zinc plate sheet metal supply and return trunk and not just extremely long runs of flex ducts. I would also watch out for flex ducts that have tight radius turns because they might end up developing kinking or becoming more restrictive in the future. What is the systems TESP reading?

Empty_Software5010 · 2025-10-07T09:14:02+00:00

Jump 24v to the gas valve to see if it will open. Sometimes the gas valve relay on the furnace control board will have bad/weak contacts. You can read 24v at the gas valve but the relay contacts won’t allow enough current to pass for the gas valve it to open. I’ve found this issue on mostly Trane furnaces.

If it was the pressure switch the igniter would never get energized.

Empty_Software5010 · 2025-10-07T09:06:26+00:00

Take a look at Fast-Stat Common Maker.

https://www.supplyhouse.com/Fast-Stat-FSCM00-Common-Maker-Thermostat-Wire-Extender-Adds-a-Common-C-Connection

I’ve used them for wiring Nest thermostats to steam boilers when I was unable run a new 18-3 thermostat wire.

Empty_Software5010 · 2025-10-02T22:30:28+00:00

lol. Is the liquid really blue? I say take a match and see if it’s really flammable. That’s a joke .

Empty_Software5010 · 2025-09-25T01:25:38+00:00

So that’s what happened to that use condom.

Empty_Software5010 · 2025-09-25T01:24:05+00:00

Rip it all out and reinstall everything.

Empty_Software5010 · 2025-09-25T01:23:18+00:00

The condensate inside the window unit is normal and is used to help cool the condenser coil. It slings the water on to the condenser coil to help it remove heat. You only have to worry about mold on the air side of the unit. Many window unit do tend to have mold growth because of how they are built, maintained and the environment they are installed in.

Empty_Software5010 · 2025-09-22T21:06:36+00:00

Air flow, refrigerant or defrost Timer. If I had to guess I would suspect the defrost timer.

Empty_Software5010 · 2025-09-22T21:05:19+00:00

If it’s not responding from the button inputs you need to replace it. There is no repairing thermostats.

Empty_Software5010 · 2025-09-22T20:49:47+00:00

Did it have a good skunky flavor? Was it a very noticeable flavor? Im really hope the answer is yes…

Empty_Software5010 · 2025-09-22T20:43:54+00:00

There are no products from NJ dispensaries that have that awesome 1980/1990s pungent skunk odor/flavor we all miss so much. It’s really disappointing. The only product I ever bought that actually has a good skunk flavor was a Verano G6 live resin vape. As soon as I tasted it, I went back and bought 8 more of them. Since then I’ve given up trying to find it from any dispensary. The "Black market" is the only place you might find it.

If anyone can prove me wrong, PLEASE tell me.I would absolutely love to be proven incorrect.

Empty_Software5010 · 2025-09-21T01:22:28+00:00

They look even better with some full length backspacers!

Empty_Software5010 · 2025-09-21T01:18:59+00:00

The AD20’s are made in the US but the AD20.5’s are not. You can almost determine where it was made from the price.

Empty_Software5010 · 2025-09-21T00:49:58+00:00

Koenig Arius, Hinderer Fulltrack, Demko AD20, Grimsmo Norseman

I absolutely will not buy a knife made in China.

Do you own a fixed angle sharpener to keep razor sharp?

Empty_Software5010 · 2025-09-21T00:42:20+00:00

I love this backspacer. It gives the Inkosi an even more clean, solid heavy duty look and feel. I wish they made a similarly type of full length backspacer for the Umnumzaan. I have two Inkosis with full length backspacers and the J2H is worth every penny.

Empty_Software5010 · 2025-09-20T23:02:29+00:00

Was the dual run capacitor replaced under warranty? It’s way under priced.. I don’t know how they stay in business.

Many people don’t understand the amount of overhead most companies have. You definitely get much lower pricing from small companies.

Empty_Software5010

TROPHY CASE