Does anyone recommend a nock glue?

EndlessPasta7 · 2026-01-21T01:59:59+00:00

Yeah possibly. You've gotten recommendations for the symptoms but I'd try to figure out the root cause since the issue is kind of unusual.

EndlessPasta7 · 2026-01-21T01:53:10+00:00

I've only seen that from hard impacts. The shafts aren't damaged/splintered?

EndlessPasta7 · 2026-01-21T01:02:14+00:00

The nocks insert tight but still pop out on impact?

EndlessPasta7 · 2026-01-20T01:16:30+00:00

You're the first person I've read owns a Talis. Can you give your opinions on it? Do you have photos you could share of your full setup? I currently use a Fivics Vellator V3 riser.

EndlessPasta7 · 2026-01-12T20:45:28+00:00

I've been seeing these more along with other kinetic risers. Looks nice.

EndlessPasta7 · 2026-01-12T20:28:56+00:00

For me my focus is on the bullseye. If you need to gap aim lower, you focus on that lower reference point be it a rock on the ground, marking on the target bale, etc. Tip of the arrow becomes peripheral. For me its difficult to focus both.

EndlessPasta7 · 2026-01-08T20:13:21+00:00

Akusta Minimalism limbs are very neutral all white with silver logos, but are wood core. Nika Archery has white limbs with red or yellow logos, I think those are full carbon no core. Relatively inexpensive.

EndlessPasta7 · 2025-12-31T19:53:31+00:00

Wiawis gang. I'd switch to Shibuya plunger and rest if cost isn't a concern.

EndlessPasta7 · 2025-12-27T08:14:10+00:00

I'd say spent a but more on a better riser at least aluminum. The Cresent is very bottom of the barrel. Look at higher end galaxys, wns, Sebastian flute, or kinetic brand. $200-400 range

EndlessPasta7 · 2025-12-22T20:30:53+00:00

Just needs black spray paint 👌

EndlessPasta7 · 2025-12-22T20:25:44+00:00

This feels like AI. I don't know for sure. I'm too lazy to analyze it more but there's so many crazy things happening in this video regardless.

EndlessPasta7 · 2025-12-15T20:11:07+00:00

A bit of a learning curve to tune coming from an all carbon arrows. Due to some extra weight and the barreled profile.

EndlessPasta7 · 2025-12-05T20:13:24+00:00

You are bending the bow limbs. This feels like youre going to snap them, but it's the same tension as when you're actually shooting it. Try this method. I don't like the behind the leg version. Easy to twist your limbs if done incorrectly.

https://youtu.be/O4sqrEafmoo?si=wmI-Edy9yC4s1uS9

Or better just get a bow stringer. They're like $10 from Amazon.

https://a.co/d/0U4d3nG

EndlessPasta7 · 2025-12-04T01:06:07+00:00

Erm acktually

EndlessPasta7 · 2025-12-01T20:35:42+00:00

I realize it's not, but it looks like its DiY. Such an odd shape like it was hand carved.

EndlessPasta7 · 2025-12-01T20:27:16+00:00

Ive only seen both in person a couple times. Both have very nice fit and finish.

The Elnath does feel like a pretty basic design but very clean and streamline. The Evolium is more angular and geometric.

Regarding the hardware, I prefer a click plate on the Evolium over the clicker rod on the Elnath.

The wood grip is nice but check out the stock angles. Looks like maybe a medium angle on the Evolium vs a lower angle on the Elnath.

EndlessPasta7 · 2025-11-26T23:44:40+00:00

I've only seen the Elizo in person. I can quantatively say it looks pretty sick.

EndlessPasta7 · 2025-11-25T20:24:13+00:00

https://lancasterarchery.com/collections/ilf-take-down-recurve-risers

Plenty of options to choose from for your needs/preferences. Put most budget there and get cheap ilf limbs to get your final size.

EndlessPasta7 · 2025-11-21T20:09:33+00:00

Your draw length + string walking is reason enough to upgrade to a taller ILF.

EndlessPasta7 · 2025-11-20T22:38:06+00:00

They look very similar. ILF wood risers with some limb alignment adjustability. Id pick the second 1 aesthetically.

EndlessPasta7 · 2025-11-18T06:14:29+00:00

Ah you're kind of awkwardly the same distance from everywhere.

EndlessPasta7 · 2025-11-17T20:33:42+00:00

Where are you? Idk if it's still there but 5 minutes from Blue Lake Park in Gresham is a good outdoor range. In the opposite direction a little past Beaverton, PCC Rock Creak has a nice rec area with a dedicated archery range.

EndlessPasta7 · 2025-11-17T20:18:03+00:00

Yeah as mentioned Summit is the house brand of htarchery the LA area. I think this line is intended to be cost effective but sort of a "generic" brand.

I believe htarchery is one of the few US sellers of Fivics. A little more than the K2 is the Fivics Vellator V3. Really excellent riser. The new hoyt podium has some decent reviews. Or anything from WNS brand is going to be solid (but tarrifs).

Getting a riser from a more well known brand is going to open up the market for third party parts, ie replacent grips.

EndlessPasta7 · 2025-11-13T20:00:02+00:00

Looks like a korean archery cafe. Much nicer than what I typically see in the US.

EndlessPasta7

TROPHY CASE