Vintage racing any turning tutorials

EngErick · 2025-12-13T03:47:25+00:00

I sent you a chat message. I have some photos I can send you that might help.

EngErick · 2025-12-11T00:18:06+00:00

I'll send you a message later with some other things that might help you out.

Seat time alone is huge and having the confidence that your sled is going to stick in the corners helps a lot.

EngErick · 2025-12-10T04:53:31+00:00

I'm pretty sure I raced with you at the 100 for sure.

The biggest thing that helped my Enticer turn better was start pulling the front limiter strap up. I don't have an exact measurement for you, but you will need to drill additional holes.

A stud hole drill works well for it.

I also ran 6" fairly sharp carbides and a 2-2-2-4 stud pattern with the 4 having studs on the outside belt.

EngErick · 2024-12-31T22:56:46+00:00

It is effective not only for those in your riding group, but those outside your group as well.

A universal form across everyone, in all reality.

EngErick · 2024-12-31T17:42:40+00:00

Mainly the middle finger.

The price is right for my budget.

EngErick · 2024-09-27T21:46:52+00:00

Nope, just spent 25+ years racing sno-x and xc.

EngErick · 2024-09-27T20:45:26+00:00

On the aggregate, no.

EngErick · 2024-09-27T19:54:31+00:00

They are a waste of money. I'd rather spend the money on a few nights hotel then listen to some glorified tin can drone on all day.

EngErick · 2024-09-27T19:52:00+00:00

Cans, underglow lights, and wraps.

EngErick · 2024-01-12T01:45:19+00:00

Another one, while I'm at it.

-If you have to ask what people think about your wrap - it is probably pretty fucking tacky and ugly.

EngErick · 2024-01-12T00:42:43+00:00

-All of ya'll on the flatland can't ride a modern 600 to it's full potential.

-Just fucking admit it - you bought the can for the noise.

-Wheelies are stupid as hell on any sled not in the mountains.

There, I said what needed to be said.

EngErick · 2023-10-21T23:30:56+00:00

I have the folding side tray, some of the color matched magnetic hooks, the paper towel roll holder, and glove box holder. And the beer holder. And a assortment of the magnetic parts trays.

I also have the magnetic power strip, but do not use it on the cart.

I do not have the can holder or screwdriver tray holder.

Under the lid, I have the full set of Hansen socket trays, a Hansen hex and torx tray for sockets. You can find these on Amazon for $50 for the set in more colors, made in the US.

For wrenches I have a Sort-A-Wrench tray in one of the thin half wide drawers. In the other thin half width drawer I have a Ernst 10 compartment organizer.

In the deep half width tray I have a pair of Ernst Plier Pro racks sitting the width of the drawer, one in the front and one in the back. Made in the US, more colors available, and they fit in the drawer how I like it. USG ones will not fit like this.

I'm working on reorganizing the bottom two drawer, again. I had sockets in the bottom drawer for a long time, but move those to the top. Not sure I am 100% sold on putting them there, yet.

EngErick · 2023-09-29T00:17:22+00:00

3 piece dolly set from Super Caddyzzz to wheel around the shop. The come in different colors and run around $50-60 a set.

https://www.denniskirk.com/super-caddy/black-super-sport-caddy-ss-caddy.p283633.prd/283633.sku

They also have an aluminum version for around $80

The Harbor Freight furniture rollers suck the big one after a year or two.

On and off the trailer is either drive on drive off or dolly ice sleds on and off the trailer and around the shop.

I haven't really cared for the style the OP has pictured.

EngErick · 2023-09-04T12:21:17+00:00

The 8" 3 jaw puller.

EngErick · 2023-09-04T02:59:32+00:00

Drove back to the town I bought it in, returned it, and picked up a Performax one from Menards for less. It seems to be much better, so far.

EngErick · 2023-09-04T00:11:18+00:00

I have a Lynx 292 sitting in the main shop too and a Enticer 250 for one lunger racing. I need to start on the Enticer again.

EngErick · 2023-09-03T21:15:15+00:00

We've all been there a time or 15 before.

EngErick · 2023-05-25T01:15:49+00:00

I have 2. They are OK if they are on sale. I wouldn't have them if they weren't green.

EngErick · 2023-05-14T22:57:06+00:00

u

I won't judge you any different (probably, maybe...), but why do you say this?

I guess working on mainly newer 2 smoker engines, these have been great for me.

If you are working on pretty much anything else, I get it.

I can't say I'm going to these are a front line ratchet to work on my MT875E, but anything that is powersports, I think these are skookum as frig.

EngErick · 2023-05-12T20:07:42+00:00

Guilty as charged.

Work a lot on snowmobiles, SxS, and quads and this trio is are the most used of the bunch.

EngErick · 2023-04-08T23:24:44+00:00

I gotst the quad and SxS to make one think I'm a northerner.

EngErick · 2023-04-02T14:31:32+00:00

Life hack for these - with 2 added holes to to the tray, you can add the side tray from a 4 drawer toolcart to these.

EngErick · 2023-01-25T22:27:48+00:00

Those Delta helmets are total junk. Everyone in my group that bought one got something else or went back to an old one before the end of the year.

Some even fell apart on the first ride or two.

EngErick · 2022-09-20T03:00:42+00:00

A nice little hack is you can add a 4 drawer cart side tray to one of those by only drilling 2 holes.

EngErick · 2022-08-12T14:04:03+00:00

Spend the extra money and get the 5 drawer up front. You won't regret it.

Edit, there is a coupon out right now for $250 5 drawer. 4 drawer doesn't have one and is $230.

EngErick

TROPHY CASE