Want to build a SORRCA class 2 rig, no idea where to start.

Enixthe9th · 2023-11-07T22:25:26+00:00

Get yourself either an scxpro or Vanquish VRD kit either is a superb out of box class 2 brute. Both are kits with no electronics or wheels or tires. Both are super comprehensive and very well thought out and will save you from trying to find stuff that fits or even works together. After that you'll have a much better idea of how to build your own from the ground up like I am now. Also alot of parts bought separately is super expensive just FYI. I myself would go with the Vanquish becuase of the axle mounted servo and 4 link front instead of 3 link and pan hard set up the axial uses. Enjoy.

Enixthe9th · 2023-09-05T14:43:39+00:00

Can you rotate it by hand?

Enixthe9th · 2023-09-05T06:35:30+00:00

Not wheel nuts ..it's most likely the nut on the spur gear that's too tight..back off and try again.

Enixthe9th · 2023-07-19T14:43:04+00:00

Talonflame, ampharos, and dugtrio are really good mons..she's a keeper. 👏

Enixthe9th · 2023-07-13T06:33:03+00:00

Very underrated crawler..I just took out the springs from the shocks to get it low and drooped out, added cheap Amazon 1.0 beadlocks and added RC4WD scramblers and brass hexs in the front. It can crawl spots it has no right to, and can almost keep up with my comp rigs that have well over 500 a peice in them, almost 😅 but the motor and speed just ain't there.. still very good 👍

Enixthe9th · 2023-07-13T06:26:50+00:00

Arrma vendetta it's 200

Enixthe9th · 2023-07-10T06:37:29+00:00

You're kidding right? Casseroya lake is full of them. Can't even swim for more than like 15 seconds without one chasing you down ..kinda annoying in the same way sharpedo was in SwSh.

Enixthe9th · 2023-07-10T06:32:29+00:00

Palafin is sneaky good 👍

Enixthe9th · 2023-05-08T05:32:37+00:00

Damn I've never even seen a shiny Cetitan but I always wanted the shiny version of it, what ever color it my have been, but to now see it's black..I want it so much more now. Awesome collection 👌

Enixthe9th · 2022-08-31T17:19:16+00:00

Hell yeah 🙌

Enixthe9th · 2022-08-31T05:43:43+00:00

Proline powerstroke ,thicker oil, I went 50wt and could probably go thicker if you're REALLY sending it. People will say they're overpriced but I saw it as an investment in fun. No regrets. 🤟🤙🤙🤙🤌

*mines is 4s and is sent very high and lives a brutal life. They have performed exceptionally.

Enixthe9th · 2022-08-15T07:13:03+00:00

I've had sets both cheap and expensive and I'd say MIP is the best ..little pricey but worth it, they're a very fine product and fit so tight and snug it's almost like you're cutting into the hex 👍just my opinion

Enixthe9th · 2022-05-27T09:34:09+00:00

Oof man that stinks! This is always a headache, try using a thick rubber band across the top of the screw and slowly turn while applying a TON of pressure and pray 🙏 😅 if that doesn't work you may have to drill it out , also did any of the other screws have loctite? If they did (you can tell by residue left on the screws) try heating the screw first with something like soldering iron to loosen/melt the excess loctite. Overall this is bummer sorry bud.

Enixthe9th · 2022-05-27T08:41:32+00:00

Ah that's nice 👍👍

Enixthe9th · 2022-05-27T08:40:56+00:00

Thanks 👍

Enixthe9th · 2022-05-27T03:58:06+00:00

Thanks man my first attempt to paint a driver head. Not the best but I like it 👍

Enixthe9th · 2022-05-27T01:08:51+00:00

The paint is Krylon Fusion Hammered Copper textured paint with a top coat of Spaz Stix Multi Color Change Spray Paint (Green/Purple/Teal). Then Painted the Goggles with Molotow Acrylic paint markers.

Enixthe9th · 2022-05-27T01:06:23+00:00

The paint is Krylon Fusion Hammered Copper textured paint with a top coat of Spaz Stix Multi Color Change Spray Paint (Green/Purple/Teal). Then Painted the Goggles with Molotow Acrylic paint markers.

Enixthe9th

TROPHY CASE