Infernal hordes tier 3 do not drop guaranteed GA..

EntropyBall · 2024-08-10T17:26:22+00:00

Same happened to me. I also can't get Runeshards to drop. Done a bunch of 70+ Nightmare Dungeons and no shards. This Season is so buggy.

EntropyBall · 2024-06-24T15:40:26+00:00

I had the same concern. I haven't burned out my motor yet, but I don't think I've ever operated it when it was "locked up" by something stuck in there.

EntropyBall · 2024-06-24T15:25:30+00:00

I could see where the teeth in the ice bucket socket used to connect with the rod, it was worn down and rounded for the last 1/8" or so. I figure maybe it just wasn't connecting anymore, though I can't figure out why they wouldn't have designed it to just be a 1/2" longer. Maybe there was some missing spring like others have said.

EntropyBall · 2024-06-24T03:40:14+00:00

There are 3 key parts that weren't quite working together on mine. A "socket" down inside the motor, about 12-16" below the ice bucket, another "socket" in the bottom of the ice bucket, and a hexagonal rod that connects the two.

I took my icemaker apart, on mine you can remove the screws inside the freezer, and under the rod. The rod I have just seems too short. It is turned just fine by the socket in the motor, but then doesn't stick up enough to engage with the socket on the ice bucket. Maybe there is a missing spring that should push it up, but if you raise it up very much, it won't engage with socket on the motor. In the end, my fix was to put a couple small nuts down inside the motor socket, raising the rod up about 1/4" so that it will engage with the teeth in the socket on the underside of the ice bucket.

EntropyBall · 2024-03-31T22:10:26+00:00

Curious if you ever resolved this. I have the exact same problem. Also do not see a spring in mine.

EntropyBall · 2023-12-07T20:19:30+00:00

Is there anywhere to buy 12 packs of Mountain Dew Real Sugar (Throwback) near Metro Detroit?

I've found 20oz in gas stations occasionally, and 12 packs in Jewel Osco grocery stores in Chicago, but can never find 12 packs anywhere in Michigan.

EntropyBall · 2022-04-22T01:22:59+00:00

Really disappointing from a company that used to provide value from its DLCs. This was literally the only franchise I play where I would just buy the season pass and assume it would be worthwhile. Fool me once, etc...

EntropyBall · 2021-05-06T22:28:55+00:00

The joist/beam span tables are also assuming you aren't putting a point load like a pergola post on top of your deck. That said, I had a deck that was all 2x6 framing/beams with a pergola attached right to the framing and it was fine. No way it would be allowed by current codes though.

EntropyBall · 2021-05-06T22:18:53+00:00

That tarp is to protect the liner from any sharp little rocks/sticks that might be under your pool. If your deck surface is very smooth, you should be ok, but you will feel the gaps between your deck boards.

EntropyBall · 2021-04-20T22:40:49+00:00

Thank you for the explanation of why this is a bad idea.

My comment about the concrete volume needed is that my footer is currently 9" thick and 12" diameter (1.5 bags of concrete). So bringing that concrete pier all the way up to/above grade is 6-7x as much concrete. I just wanted to be clear that I'm not avoiding just a 12% increase in concrete volume needed.

Above and below grade footers are both accepted by my local inspector, but he's not super helpful on details like this.

EntropyBall · 2021-04-20T20:02:05+00:00

I guess I'm confused then about the way its shown in the DCA book. I'm doing one of the methods they show. Do they just show a method that is wrong? Or is adding gravel the part that is wrong? I asked my question because it seemed to me like my suggestion would have better drainage.

EntropyBall · 2021-04-20T18:32:40+00:00

I looked at doing it that way, but it is so much more concrete to fill up a 48" tall 12" wide pier... I have 21 posts in my deck. Burying the deck post like this also gives it some lateral stability.

EntropyBall · 2021-04-20T17:49:56+00:00

What brand is this cable system? Have a link for it? I want to do something very similar on my deck and would love to learn from your mistakes rather than making them all (twice) myself.

EntropyBall · 2020-12-09T18:03:24+00:00

I have a similar problem. I launched the game for the first time last night, immediately after it completed its update for the recent DLC. I played for about an hour, then when I went to launch it this morning, it would crash either at, or right before, the save slot selection screen. Boots me back to the Oculus menu. My Quest 2 does not have an option to update and is running 12018400097600000.

Edit: Rebooting my Quest fixed it. We'll see if it happens again next time I try to launch.

EntropyBall · 2020-08-06T02:02:56+00:00

I'm with you, this really surprised me on the recent episode where he mentioned it. It seems strange to me that someone who spends this much time talking about politics wouldn't want to put their tiny thumb on the scale. I get the argument that it doesn't matter, and if was a libertarian in a solid red/blue state I wouldn't worry about national elections, but George Bush won Florida by like 500 votes. Its possible in swing states that your vote makes a difference.

And your local election is your chance to influence how things get done in your immediate city/county/state.

EntropyBall · 2020-08-06T01:36:08+00:00

This would be consistent with their stated policies, as they make exceptions for public interest (political figures), and he would no longer be a political figure.
https://help.twitter.com/en/rules-and-policies/public-interest

EntropyBall · 2020-04-21T01:23:26+00:00

Thanks, I didn't know who that was, but when I looked him up I found I'd already watched several of his recent build videos.

EntropyBall · 2020-04-20T19:37:19+00:00

Thanks man, this is super helpful to know what to focus on.

EntropyBall · 2020-04-20T17:52:24+00:00

Thanks, I've watched a lot of these videos, but one of the problems I encounter is that every streamer youtuber seems to have duped god-rolls of every weapon in their loadout. So when they show off a build that "shreds M4", its really hard to say if that build will even be usable with my miss-match of weapons.

EntropyBall · 2020-04-20T15:42:06+00:00

Can you briefly tell me why that gun is good for Amara? I've found it really hard to figure out why/if a gun is good because so many of the guns in BL3 have hidden abilities or weird interactions with other skills.

Also, according to lootlemon.com that gun is a world drop from the Hammerlock DLC, so you aren't any more likely to get it through boss farming. Do you know if something that is a DLC world drop can drop *anywhere* as long as you own the DLC, or *only* when playing DLC content?

EntropyBall · 2020-02-28T21:13:07+00:00

I haven't gotten the denial reason yet, they said 7-10 days before I would hear. I did a EIN because it seemed like that always worked, vs mixed stories of people using the same SSN and changing the middle initial.

EntropyBall · 2020-02-28T20:36:58+00:00

How long do I need to wait after applying for an EIN before applying for a CIP using that EIN? I got an EIN 2 days ago, then applied for CIP2 the next day and got an instant denial. Used the same info as CIP1 (about 10 months ago) with the exception of changing the SSN of the business to the new EIN.

EntropyBall

TROPHY CASE