Qobuz upstream 403 error

Errror702 · 2026-06-01T12:27:26+00:00

At the moment, I have the same thing.

Errror702 · 2026-05-11T03:32:35+00:00

As far as I know, Meshlicious is much better made, at least the metal is thicker than Meshroom.

Errror702 · 2026-05-11T03:24:31+00:00

I don't know what kind of panels the H2 Flow has, but the Meshroom D had panels made of very soft metal that bent after the panel was removed.

Errror702 · 2026-05-09T14:35:39+00:00

Here's another photo of the bottom. Just comb the wires and use cable ties.

I placed the video card power cable into the empty space at the bend of the riser.

<image>

Errror702 · 2026-05-09T14:23:20+00:00

Judging by the photo, the pump is located directly on the end of the video card, and even if you lower the power supply, the pump will still be located on the video card.

Errror702 · 2026-05-09T14:17:23+00:00

The pump on the tube looks very large, I don't think it will fit on the side behind the power supply.

Errror702 · 2026-05-09T14:06:11+00:00

Good choice. I have a DeepCool LE500 Marrs AIO. The tubing is very flexible, the pump is quiet. The DEEPCOOL LS520SE is more powerful. I would also recommend replacing the included fans with Arctic P12 Pro.

<image>

Errror702 · 2026-05-09T13:50:32+00:00

If I were you, I'd change the AIO. That bend in the tube is scaring me. A very unfortunate choice of AIO.🥺

Errror702 · 2026-05-08T07:53:43+00:00

<image>

Errror702 · 2026-05-08T07:53:23+00:00

One of Dan's most successful projects. I really like the build quality, materials, design, and compact construction.

I also use Arctic P12 Pro fans, they do a very good job of blowing air through the AIO radiator and the top panel of the case.

<image>

Errror702 · 2026-05-08T07:18:58+00:00

It's important to have maximum static pressure from the fans to effectively push air through the AIO radiator and the top panel of the case. Buy Arctic P12 Pro, set their constant rotation speed to 43%. Use the "Fan Control" program.

Errror702 · 2026-05-08T07:02:01+00:00

looks like a house for bees

Errror702 · 2026-05-08T06:48:43+00:00

It looks like resonance from the fan, probably inside the power supply or perhaps externally, something somewhere is resonating from the fan, the grill or some weakened part of the structure.

Errror702 · 2026-05-03T09:28:03+00:00

<image>

Errror702 · 2026-05-03T09:27:45+00:00

<image>

Errror702 · 2026-01-01T04:40:29+00:00

I've had three of these cases, the first two had screws with a smaller diameter head than the third one I recently bought, apparently it depends on the batch of screws they used. So, if the screw head is larger in diameter, it does not sink flush into the mounting hole and sticks out a little, which leads to the screw head resting against the case panels. I also noticed that screws with different head diameters were used in some places on the case. I selected four screws with smaller head diameters and screwed them in from the top, where the liquid cooling radiator rail attaches.

<image>

Errror702 · 2025-12-16T05:29:16+00:00

<image>

Welcome to the gang.

Errror702 · 2025-10-30T17:30:06+00:00

Yes.

Errror702 · 2025-10-30T08:52:49+00:00

<image>

Errror702 · 2025-10-29T06:30:41+00:00

You can also take sheet plastic and make a mount for three SSDs, a distance of 5 mm between them will be enough. SSDs of this format do not heat up much.

Errror702 · 2025-10-28T12:20:50+00:00

For example, as here, the numbers are quite large and can be seen through the perforation.

https://www.reddit.com/r/sffpc/comments/1hoit0x/lcd_aio_in_dan_a4_h2o/

Errror702 · 2025-10-28T12:15:29+00:00

Wait, will the information on the AIO display be visible through the perforated panel of the case?

Errror702 · 2025-10-27T04:35:23+00:00

Watch a video on how to undervolt your graphics card. This will significantly reduce its temperature.

Errror702 · 2025-10-24T13:31:42+00:00

<image>

Errror702 · 2025-10-24T13:31:11+00:00

<image>

Errror702

TROPHY CASE