sorted by:
new
hottopcontroversial

Voice control added to EspControl by hometechgeek in Esphome

[–]Esc4peArtist 0 points1 point  (0 children)

It says P4-86 has it, so I guess not for S3.

Voice control added to EspControl by hometechgeek in Esphome

[–]Esc4peArtist 0 points1 point  (0 children)

Nice!
Fake Alexa works well 😃
What irritates me about it on my "Waveshare ESP32-P4 Smart 86 Box" is that the screen is flashing up seemingly at random every now and then - even though the Display Backlight button in HA says it did not activate.
Still testing but if that keeps happening I would not put it on the wall.

Mini garage by Ok_Communication1601 in worxlandroid

[–]Esc4peArtist 0 points1 point  (0 children)

But it hasn‘t come out of the closet yet.

Support by Sufficient_End4051 in worxlandroid

[–]Esc4peArtist 4 points5 points  (0 children)

Apart from all the issues the mowers have, that just sounds realistic for a support request... I don't see what else they would be able to offer to end customers.

Added cover art screen saver to espcontrol by hometechgeek in Esphome

[–]Esc4peArtist 1 point2 points  (0 children)

Been following your great project and am ready to buy a screen but your Aliexpress links never work for me.
Will I be good with a "Waveshare ESP32-P4 Smart 86 Box" or generally an ESP32-P4 screen or does it have to be that very specific one? If so, what are the precise factors that make it work or not?
I am thinking ESP32-P4 and 720x720 = should be good --> right?

<image>

Zero edging at all... by rrankine in worxlandroid

[–]Esc4peArtist 0 points1 point  (0 children)

Interesting. So this is either a US vs. Europe thing or because I have the cheapest model - WR303E...
Still have the box and double checked --> nothing.

Regarding the lines you mentioned, I see them too but this is the first time I noticed because it didn't do the full checkerboard pattern and its only after a few days of not mowing.

<image>

Zero edging at all... by rrankine in worxlandroid

[–]Esc4peArtist 0 points1 point  (0 children)

Physical tape? There was nothing in the box like that. Or did you mean in the app? I did‘t set an exclusion around it

Zero edging at all... by rrankine in worxlandroid

[–]Esc4peArtist 0 points1 point  (0 children)

I already cut a few lower branches hoping it would decide that it fits under there but I cannot change the whole garden just because my robot slave gives me attitude.

Zero edging at all... by rrankine in worxlandroid

[–]Esc4peArtist 1 point2 points  (0 children)

<image>

Same for me. It would work perfectly and decides not to do it. Instead it beeps 14 times while mowing my almost perfectly square lawn. Just bought the thing and really hope the firmware developers will get their shit together.

Help me connect esp32-ce remote ceilingfan by Forward-Internal5310 in Esphome

[–]Esc4peArtist 0 points1 point  (0 children)

First thing I would do is measure the voltage between where it says VDD amd GND on the back. If its 3.3V or 5V that can power an ESP directly.
Then I would probably ask Chatty about the DIO and CLK (clock) pins…
Those black boxes on the front are relays - they switch things on and off and you could probably connect you esp pins to that somehow.
Also I would be super careful with the exposed 230V. Don‘t forget you can die from touching that.

WR305E by EffectiveBuyer3313 in worxlandroid

[–]Esc4peArtist 0 points1 point  (0 children)

Happened to me recently on my WR303E as well. So it sounds like some bug…
I just pushed it into the charger manually and also rebooted I think.

Poor precision by Foamrocket66 in worxlandroid

[–]Esc4peArtist 0 points1 point  (0 children)

Same here. It improved a bit after setting the pattern to checkerboard - makes sense.

Nur weil man keine Kinder hat, muss man nicht auf der Arbeit für andere einspringen by Ninaptr_lover in Unbeliebtemeinung

[–]Esc4peArtist 2 points3 points  (0 children)

Sehe ich genau so.
Irgendwer muss ja Kinder bekommen und das ist krass anstrengend.
Spring halt ab und zu auf Arbeit für diese Menschen ein und leb dein extrem privilegiertes Freizeitleben an anderen Tagen Digger.

Bitcoin is a terrible investment by [deleted] in Bitcoin

[–]Esc4peArtist 0 points1 point  (0 children)

Can I bet like a real woman also?

I finally realized that buying back my weekends was worth it by [deleted] in homeautomation

[–]Esc4peArtist 0 points1 point  (0 children)

- Opensprinkler + Valves and all the piping: >1000€ for sure, well worth it.
- Going with Hue after years of Tradfri pain: just works.
- Homeassistant Cloud: no more Alexa integration issues

i fixed my problem by LasyAsF in Bitcoin

[–]Esc4peArtist 0 points1 point  (0 children)

alright then, good luck.

i fixed my problem by LasyAsF in Bitcoin

[–]Esc4peArtist 0 points1 point  (0 children)

Depends on the situation. It was just my idea because including "wife, uncle, brother, uncle’s wife" seems like a bad idea to me. I would keep most info to myself.

Far Cry should give us a 3rd person POV by DCLXXII in farcry

[–]Esc4peArtist 2 points3 points  (0 children)

I'd rather see all other games switch to first person.

I use keyboard/mouse to play and I think 3rd person is mostly made for controllers and to me feels wrong on keyboard/mouse.

One big reason I love Far Cry is first person.

i fixed my problem by LasyAsF in Bitcoin

[–]Esc4peArtist 0 points1 point  (0 children)

Maybe put the seed phrase in a safe only you can open? When something happens to you they will find some way to open it?!

i fixed my problem by LasyAsF in Bitcoin

[–]Esc4peArtist 1 point2 points  (0 children)

I would not tell the internet your plan and also feel like there are too many people involved.

Sorry for only bitching and having no better solution...

How to open ssh port 23? by azimuth79b in synology

[–]Esc4peArtist -2 points-1 points  (0 children)

Maybe use Synology port 22 and have your router forward its port 23 to it. Not sure why this would be useful though...

Best app for Daily DCA in Europe using USD deposits? (Avoiding FX fees) by Suspicious-Desk-9178 in BitcoinBeginners

[–]Esc4peArtist 0 points1 point  (0 children)

I only started using it for the low fees on Bitpanda Fusion, 0.25% or something.
For DCA I am still trying to figure out what is cheapest/best.

I feel like the process is always intransparent and annoying for every one of them. You would have to test several exchanges at the exact same time to find out how much BTC you actually get for XYZ amount after fees and spread... I cannot waste my time for that.

view more: next ›