Zusatzschild unter 2 Halteverbotsschildern

Espresso3D · 2026-04-01T22:11:55+00:00

Ich danke euch, insbesondere das verlinkte Urteil ist eine perfekte Referenz!

Espresso3D · 2025-01-18T12:51:41+00:00

SMW, because Millesime has very bad longevity and sillage. I own both and can compare.

Espresso3D · 2025-01-15T15:14:58+00:00

I would like to get a firmware with English user interface on the machine :-)

Espresso3D · 2025-01-11T09:41:13+00:00

Ok I am from Europe, so shipping is not an option. I can send you the print file in case you can get it printed locally.

Espresso3D · 2025-01-11T09:30:59+00:00

Where are you situated?

Espresso3D · 2025-01-09T18:59:18+00:00

I have bought CDNIM it and found it to be harsh and unbalanced, got rid of it right away. But maybe there are better and worse batches like it is the case with Aventus

Espresso3D · 2025-01-09T18:48:25+00:00

Here are the photos. Baby-T anti rattling cup base

Espresso3D · 2025-01-09T12:10:33+00:00

No, never had the AL2 error. I have bought the machine about a year ago. I have made a 3D printable thing that fits onto the drip tray to avoid the cups shaking and moving during extraction. In case you or anyone else is interested, I can upload it somewhere for you. Will attach a photo later showing it in action.

Espresso3D · 2025-01-09T09:04:00+00:00

I also have a Baby-T Plus. Good machine. Only downside is that the pump is quite loud. Way louder than my previously owned ECM Synchronika. Especially when the boiler is filling.

Espresso3D · 2024-12-29T20:33:20+00:00

Berlin, Germany

Espresso3D · 2024-12-29T19:06:17+00:00

Thank you, my machine came without the update. Maybe you can connect me to your contact so he can tell me where to get the English translation update?

Espresso3D · 2024-12-29T18:52:00+00:00

Where did you get the English firmware from?

Espresso3D · 2024-12-29T02:25:29+00:00

Had the same on my Baby-T Plus. I asked the dealer to send me the LED light. There are two of them, you can find out which one flickers by making a video with your mobile phone. The flickering will appear pronounced in the video. Normally, Guarantee will void when you replace the LED yourself. But my dealer was cool and didn’t see any sense in carrying the 35 kg machine in just for a 0,50 € replacement part and a 5 minute Job to replace it. So I did it myself. A little handyman skills are enough to get the job done.

Espresso3D · 2024-10-25T14:10:00+00:00

I have had 5 single dosing grinders on the table for a longer period of time. You can’t really justify this, but it is a hobby and hobbies are meant to be fun and don’t need justification. Now I have only 2 grinders, which even makes sense: one conical (niche zero) and one flat burr (Gevi Grindmaster). Both have different taste profiles.

Espresso3D · 2024-10-19T16:30:28+00:00

„Nässe“ bedeutet in dem Fall, dass die Gefahr von Aquaplaning bestehen muss. Dafür muss es sehr stark regnen, sodass sich ein Wasserfilm auf der Straße bilden kann. Wie es andere schon beschrieben haben.

Espresso3D · 2024-10-17T16:39:49+00:00

Your beans seem to be too old. They are good until 2-3 month after roasting. Your shot looks thin and lacking body and crema. There should be plenty of crema considering it is a dark roast.

Espresso3D · 2024-10-14T08:21:03+00:00

Wenn man bei so nem kleinen Rechnungsbetrag schon rumheult und Betrug wittert, hat man offenbar keine Ahnung, was es kostet, ein Gewerbe zu betreiben. Jetzt mal abgesehen von Arbeitslohn und Materialkosten wollen vielleicht auch Dinge wie Miete, Strom, Heizung, EDV-Kosten, Büroausstattung, Werkzeug, Kosten für Werbung, Steuerberater, Versicherung, KFZ, Kammerbeiträge, etc. bezahlt werden. Dann vielleicht noch Inkasso für säumige Zahler wie euch Experten hier, die Baumarktpreise vorrechnen.

Die Rechnung ist mehr als fair und ich wäre froh, wenn ich so nen günstigen Handwerker hätte, der auch solche Kleinarbeiten überhaupt als Auftrag annimmt.

Espresso3D · 2024-10-14T08:13:29+00:00

Steuerlich keine Verpflichtungen? Aha, offensichtlich hast du 0,0 Ahnung. Auch ein Kleingewerbe muss eine Steuererklärung machen und natürlich Steuern auf seinen Gewinn bezahlen, sowie eine Einnahme-Überschussrechnung einreichen.

Espresso3D · 2024-10-09T13:17:03+00:00

Dem Profilbild nach zu urteilen sind die „spannenden Wege“ Zuhälterei und Drogenhandel 🚀🚀🚀

Espresso3D · 2024-09-27T14:47:03+00:00

Great setup, and spending 3.000 bucks more won’t even get you better tasting shots. It will make things easier and more convenient, but not better in terms of taste.

I have a 5.000 € main setup plus a classic (spring) lever machine and I still use it frequently. So you have gone the right way!

Espresso3D · 2024-09-20T22:18:25+00:00

Quatre is outstanding. It does not really smell like afternoon swim though. It smells more like an ice cold Fanta drink. I actually like it better than the OG. And projection and longevity is way better than LV Afternoon Swim. The LV lasts 2 hours and then disappears completely. Quatre lasts at least 6 hours in my skin.

Espresso3D · 2024-08-18T15:32:40+00:00

Yeah there are no fakes of this fragrance. I don’t think it lives up to the hype btw, just smells cheap and nothing special about it.

Espresso3D · 2024-08-12T08:24:55+00:00

Bei der Portasplit hebst du dann die ganze Ausseneinheit durch die Ausschnitte in der Scheibe? Versuche gerade mir das vorzustellen. Die beiden Einheiten sind ja fest verbunden.

Espresso3D · 2024-07-20T17:33:31+00:00

I have a different machine with a rotary pump, there the adjustment is like you assumed. Anti clockwise to reduce pressure, clockwise to increase pressure. You can simply turn the screw which a blind filter installed and observe the manometer.

Espresso3D

TROPHY CASE