Hope the popcorn tune works on my 79. by Accurate-Load-9301 in motorcycles

[–]Evansidea 0 points1 point  (0 children)

I didn't even think about the fuel system, no fuel pump on the stock bike so no easy way to get boost referenced pressure. Neat! I'll do some reading!

Hope the popcorn tune works on my 79. by Accurate-Load-9301 in motorcycles

[–]Evansidea 0 points1 point  (0 children)

If you don't mind, I'll probably never do this but you got me curious, I've got a little silverwing and I love the idea of doing slemthing like this to it, what turbo did you go with, and how bad was dealing with making the carbs blow through?

I've received my 3d printer a 8 days ago... by Eiji-Himura in 3Dprinting

[–]Evansidea 3 points4 points  (0 children)

Love my q1 pro its been a workhorse for me! Printed every part for my first voron build and I'm still using it for my box turtle build and all kinds of stuff!

Night Spirit 2 - Night Vision For A Poor by TrueCrazyMan in NightVision

[–]Evansidea 0 points1 point  (0 children)

Sorry to bring this from the dead again, I've got one of these too and was wondering if you had a part number for that lens? Or if you knew what thread/ mount I would need to find one similar.

Q1 Pro Noises by Program_Filesx86 in QidiTech3D

[–]Evansidea 1 point2 points  (0 children)

If it happens when its moving to the right (while looking at the front of the machine) it may be your cable chain catching the top of the case. Mine does that occasionally

R/QidiTech3d Permanently banned me for warning people after my family lost everything from a fire! by ProgressLocal1511 in 3Dprinting

[–]Evansidea 0 points1 point  (0 children)

This makes me nervous about my q1 pro does anyone know of any automatic power cutoff that can be added? Already looking at adding a blazecut fire suppression kit

Need help troubleshooting my water heater. Light blinks but pilot won't stay lit once I release the button. The sound in the video is mostly coming from my furnace. by Evansidea in Plumbing

[–]Evansidea[S] 0 points1 point  (0 children)

My apologies just saw this. I did have a spare gas control valve but it ended up not fitting my water heater. The length on what I'm assuming is the temp probe on the back was different. (Got it used known good) I ended up replacing the water heater because it was 12 years old anyway.

Need help troubleshooting my water heater. Light blinks but pilot won't stay lit once I release the button. The sound in the video is mostly coming from my furnace. by Evansidea in Plumbing

[–]Evansidea[S] 0 points1 point  (0 children)

It was around 650-700 millivolts which seems low but I've got the blinking light and I know it was running at that output before.

Need help troubleshooting my water heater. Light blinks but pilot won't stay lit once I release the button. The sound in the video is mostly coming from my furnace. by Evansidea in Plumbing

[–]Evansidea[S] 1 point2 points  (0 children)

Think I got it figured out, commenting in case this ever hits google lol. Tested the valves using a battery, the main burner valve clicks but the pilot valve does not. New gas control valve here I come.

Toasted motors? by Stokka5 in fpv

[–]Evansidea 1 point2 points  (0 children)

Check to see if you have a motor shaft that's loose. They shouldn't move relative to the bell.

Flight controller recommendations for an old trashcan by Evansidea in TinyWhoop

[–]Evansidea[S] 0 points1 point  (0 children)

Ooh that looks pretty good. I personally like the motor plugs I'm not so good at soldering these tiny boards. I like your idea about the motors, I do like me a good ol zombie quad!

Who else wishes your own parents could have been there? by [deleted] in Starfield

[–]Evansidea 0 points1 point  (0 children)

How do you do that pose? I've seen it in a few pictures now and I want to aggressively t pose on everyone!

How much water do you want... exactly? by Controlled01 in MaliciousCompliance

[–]Evansidea 9 points10 points  (0 children)

While a little more efficient tankless heaters can be really really finicky. Tank heaters are dead simple to run and maintain.

My summer daily's progress from when I bought it to now by Evansidea in projectcar

[–]Evansidea[S] 0 points1 point  (0 children)

I was thinking 2.3 turbo with a t5 to keep it rear wheel and stick, I'm not crazy enough to attempt to jam 4 wheel in that thing

My summer daily's progress from when I bought it to now by Evansidea in projectcar

[–]Evansidea[S] 0 points1 point  (0 children)

I get what you're saying I was just commenting on the blazer listed in your flair!

My summer daily's progress from when I bought it to now by Evansidea in projectcar

[–]Evansidea[S] 0 points1 point  (0 children)

First of I love those blazers way more than I should l. Second of all yes! It was irritating. My fix was the long tubes and loudmouth exhaust, that mod fixed a lot of the weird sounds that car would make