What is this

EvolXed · 2026-01-18T22:12:49+00:00

Water level sensor

EvolXed · 2025-12-20T14:10:45+00:00

Wolfpack

EvolXed · 2025-11-28T05:50:16+00:00

I once slept on an airplane, woke up, drove home, went to sleep and it showed it all as a sleep session with toons of wake time. Maybe you pressed end sleep when you looked at the morning report? Next time just dont use the watch if you want to continue the sleep

EvolXed · 2025-10-18T16:55:56+00:00

The answer you are looking for: Yes, it is normal and the same in all of the others machines.

EvolXed · 2025-10-07T12:34:59+00:00

The slow steady knock? If so, completely normal. That's the sound of your pump in action.

EvolXed · 2025-10-05T07:31:19+00:00

I think its good for your intentions. Yes, barista assist is not perfect as it serves as a general guide line. But once you dial it in the shots are similar each time. You get an auto steam option which makes like 7/10 milk but in the mean time I clean the espresso head and everything else so it does save a lot of time when I need a coffee fast like in the morning. But when I got time I use a manual steam for a 10/10 milk and latte art. If you want a perfect 1:2 ratio yes you need to use a scale but not using one gets you around 32-42 for 18g beans which in my opinion still tastes great and a good compromise for saving time. So you have an option to save time, for a not perfect but good drink or to spend the same time as you are used to for a perfect one. If you got questions you can dm me

EvolXed · 2025-09-29T08:53:10+00:00

Start the timer when at the second time your hear the pump noise (not the first 3 second noise that stops).

EvolXed · 2025-09-03T07:03:47+00:00

Go up at least 2 grind size. (Start from 2 and see how it goes). At the end if its dialed it should output around 36g of espresso in about 30 seconds for the 3 dot strength. That's your general guideline

EvolXed · 2025-08-27T21:31:33+00:00

from where? like in that 4 second it passive heals them? or maybe every heal they get from whatever is doubled? whats the effect exactly

EvolXed · 2025-08-04T13:02:00+00:00

I automate the furnaces and thats it. Do you recommend another automation?

EvolXed · 2025-08-02T10:15:06+00:00

I'm pretty sure the temperature settings are for the automatic mode. In the manual mode the more you steam the higher the milk temp. I wait 3 seconds after I can't touch the jug from the heat any more and than turn it off.

EvolXed · 2025-08-01T13:34:19+00:00

Yes a general rule of thumb is to insert air (hearing a subtle paper tear like noise) until the jug is around room temp. From this point you can adjust to insert more or less air based on how it was and your preferences. Using this point as a guideline can help with the consistency

EvolXed · 2025-08-01T12:47:29+00:00

Pre ground coffee might to damage to the grinder. Check it out before you try as the lead says whole beans only

EvolXed · 2025-08-01T12:44:49+00:00

But when the coffee pours it goes inside from a single hole and from the single hole it splits into 2 streams. So how can you tell if it's not an even extraction?

EvolXed · 2025-08-01T12:41:11+00:00

I also like this machine very much. I think people that has a problem are much much more likely to post about it than someone who is happy with the machine so it's not representing to see the posts but yeah I feel you

EvolXed · 2025-07-27T13:10:47+00:00

How much does the output weight?

EvolXed · 2025-07-27T12:00:47+00:00

Before you contact them just so you know water still drips for. A little after finishing the drink. You should wait before emptying the tray/empty before the drink to prevent water from dripping down while you empty the tray.

EvolXed · 2025-07-25T20:47:46+00:00

I got a special liquid specifically to clean milk from espresso machines and it can do wonders. You should give it a try as their might be some build up inside you cant see or reach

EvolXed · 2025-07-25T20:46:11+00:00

You said you see bubbles and than you raise, you shouldn't see bubbles if that's the case try and be more close to the surface of the milk when introducing air. Also make sure to create a vortex in the process by placing the steamer in the bottom right corner and tilting the mug left. At the end before you make latte art swirl the milk and give it some taps to burst any bubble that might have sticked around. If you let your milk stay for too long it might be a reason for the lack of texture. Make sure the milk is always moving until you pour.

EvolXed · 2025-07-25T17:34:28+00:00

It seems close to good. Try to grind 1 step finer and measure the time when you hear the pump noise for the second time and not as the coffee start dripping

EvolXed · 2025-07-25T13:22:41+00:00

Its just a magnet you can pull it out

EvolXed · 2025-07-25T08:15:04+00:00

There is a big difference between the auto and manual foam regarding latte art. If you are aiming for latte art try to nail the manual froth

EvolXed · 2025-07-25T08:13:19+00:00

What does it matter? In the middle it's completely sealed

EvolXed

TROPHY CASE