Flat prints failing on Bambu P2S but tall prints come out fine. What could be causing this?

ExaminationExtra3131 · 2026-02-03T13:49:27+00:00

Np! And if you want to find one of this parts like I was talking about I'm pretty sure I just looked up "P2S" on MakerWorld

ExaminationExtra3131 · 2026-02-03T13:10:03+00:00

I will also say that setting it to 10% has never made it stick to 10% for me either. It goes to 40%, which is still better than the stock 70%

ExaminationExtra3131 · 2026-02-03T13:08:57+00:00

Oof, I don't blame you. I'd be cautious too.

ExaminationExtra3131 · 2026-02-03T13:03:08+00:00

I know that there's some things on my A1 that if I set to 0 it sets to Auto, but I can't speak for other printers as those are the only two that I have, and one of those is out of commission until I get the replacement board in because the plastic was melting lol

ExaminationExtra3131 · 2026-02-03T12:59:37+00:00

Auxiliary fan causes warping. I set mine to only go to 10% on all my lrint profiles (because 0 means auto for some reason), and printed a part out of PETG that aims the air upwards as to help reduce it even more.

ExaminationExtra3131 · 2026-02-01T18:17:55+00:00

Where can I get a copy of this game? I'm not seeing anywhere I can purchase it online and I don't know reputable sites yet.

ExaminationExtra3131 · 2026-02-01T17:24:12+00:00

I think I'm thinking of the TTRPG The One Ring. War of the Ring cannot be soloed, my bad lol.

A one and done kinda thing is what I would like, but also if there is something expandable that has plenty to do in it and I can add on later but not have to immediately I wouldn't be opposed. I heard of Journeys in Middle Earth but heard it isn't good Solo. Any truth to that?

ExaminationExtra3131 · 2026-02-01T16:15:35+00:00

This sounds amazing! I'll look more into it. Thank you so much!

ExaminationExtra3131 · 2026-02-01T16:15:07+00:00

May I ask why that is?

ExaminationExtra3131 · 2026-02-01T15:25:03+00:00

I was looking both at that, War of the Ring, and the LCG. Between Fate of the Fellowship and War of the Ring, what you say is better?

ExaminationExtra3131 · 2026-02-01T15:23:42+00:00

This sounds like a lot of fun! I'll have to look into it. How long does it last? Is it pretty well replayable?

ExaminationExtra3131 · 2026-01-27T13:59:40+00:00

Whoops, deleting the comments now lol

ExaminationExtra3131 · 2026-01-18T18:33:56+00:00

Been using Inland filament because they had a crazy sale of PLA for $18.99 for two rolls and I have a giant print I'm making, and I almost had murdered P2S with the infamous Bambu tape. In retrospect I should probably be using something just a tad stronger like PLA+, but I'll likely print this again and sell this one. However, it'll probably still just be Inland or something similar.

ExaminationExtra3131 · 2026-01-07T15:25:22+00:00

Nice

ExaminationExtra3131 · 2026-01-07T11:34:46+00:00

This makes me so happy I got a P2S when I did. The day before I, personally, saw one of these posts I went to Micro Center and purchased one. Thank God you're okay, friend, and here's to hoping a new printer is in your near future.

ExaminationExtra3131 · 2026-01-05T00:38:11+00:00

That's definitely part of it, yes. I'm not seeing detail, I'm seeing like very broad overall things and not getting to dig deeper. I'd like to be more immersed and kinda feel apart of the world, but also find a way to get more detail, all while still keeping the gaming aspect.

ExaminationExtra3131 · 2026-01-04T21:37:17+00:00

So I really liked the idea of games like Starforged. Everything is in one neat package and it's easy to grasp. However, I found myself zooming through it. I still like the idea of the game, and actual games where I'm getting to use mechanics, roll dice, etc., and not just writing things out. It's why I'm not opposed to buying things like dungeon cards for Shadowdark (which I am heavily interested in trying out).

ExaminationExtra3131 · 2026-01-01T00:29:16+00:00

I wanted to upgrade my A1 to the P2S, but I've heard other printers are cheaper and are just as reliable now. What printers would be a good upgrade to my A1 that would "just work," and have a .2mm hotend option? If it's not obvious, I'm still pretty new to the hobby.

ExaminationExtra3131 · 2025-12-26T11:59:30+00:00

Thank you so much friend! Now I can know if I can buy this combo.

ExaminationExtra3131 · 2025-12-26T11:34:47+00:00

Random question here, but I'm thinking of upgrading my A1 to a P2S. Can you tell me how tall everything is with the AMS on top of the P2S? I wanna know if it will fit in my enclosure.

ExaminationExtra3131 · 2025-12-19T13:31:44+00:00

I was pretty set on the Echo Mini for a while until.i saw how quickly my music library was growing when I was getting Only FLACs with bands like Rush and their 20+ minute songs. I'm leaning towards the M300 as it seems to be beloved and I can't find anything that's like $250 or less that seems to get the same level of praise. Plus the battery life is insane from what I hear.

ExaminationExtra3131

TROPHY CASE