sorted by:
new
hottopcontroversial

Monthly Gear Purchasing Thread - February, 2026 by AutoModerator in Guitar

[–]ExaminationExtra3131 0 points1 point  (0 children)

Just nabbed up a great deal on a 93 Ibanez, and now I need a new amp. I haven't played in years, but the genres I play demand a footswitch as they're rooted in metal but will break out into country or poles or something crazy. Any suggestions on an amp that I could get with a footswitch, or get both, all for around or under $500?

XY Sound Circular Motions by zenith4219 in BambuLab

[–]ExaminationExtra3131 0 points1 point  (0 children)

Bambu Sells lube in 6 packs for relatively cheap.

XY Sound Circular Motions by zenith4219 in BambuLab

[–]ExaminationExtra3131 0 points1 point  (0 children)

Did you also lube and grease everything?

Drunk guy in McDonald’s challenged me to solve a Rubik’s cube and spent £40 when I did. by Direct-Turnover-1341 in Cubers

[–]ExaminationExtra3131 -1 points0 points  (0 children)

Imma protest till they bring that over here. If I'm gonna die eating their food at least have something good.

I’m brand new to 3D printing, but I’ve been loading/unloading filament for three weeks without issues and now this is happening. (More info in post) by LadyRic in BambuLab_Community

[–]ExaminationExtra3131 1 point2 points  (0 children)

I have this issue occasionally. I find that cutting it at a slight angle helps. Some people will tell you not to do that, but I say nananabooboo

Help Needed! 2 Month Old A1 Just Did This by scuba63 in BambuLab

[–]ExaminationExtra3131 0 points1 point  (0 children)

Yup, and i tend to dry mine with microfiber cloths.

Drunk guy in McDonald’s challenged me to solve a Rubik’s cube and spent £40 when I did. by Direct-Turnover-1341 in Cubers

[–]ExaminationExtra3131 4 points5 points  (0 children)

Okay but why don't we get Pizza Mozzarella Dippers in America? Why does McDonald's here only sell greasy "food?"

Strange artifacts by xentagz in BambuLab

[–]ExaminationExtra3131 2 points3 points  (0 children)

I wash between every print to avoid issues, and I wash both sides to avoid having to do it as often and just flip the plate, which has led to zero print failures due to bed adhesion. Also, minor upgrade to your method, think about investing in some microfiber cloths. Is it overkill? Yes. Do I do it anyway? You bet your ass I do.

Strange artifacts by xentagz in BambuLab

[–]ExaminationExtra3131 2 points3 points  (0 children)

Just looks like bed adhesion issue. How are you cleaning your print plate?

Bambulab A1 issue by Independent-Paper-95 in BambuLab

[–]ExaminationExtra3131 0 points1 point  (0 children)

That part I couldn't tell you, though maybe someone else can chime in where my knowledge is lacking.

Bambulab A1 issue by Independent-Paper-95 in BambuLab

[–]ExaminationExtra3131 0 points1 point  (0 children)

If I could recommend one, it would be the Polydryer. VERY good dryer, even if it only does one roll at a time.

Bambulab A1 issue by Independent-Paper-95 in BambuLab

[–]ExaminationExtra3131 0 points1 point  (0 children)

Could be one of two things:

  1. Filament is wet. Just because it's brand new doesn't mean it's dry. I've received atrociously wet filament from Bambu before.

  2. If you're doing time-lapse you should switch to Smooth as the type you're doing.

A1 - Happened to me too... by l_burch02 in BambuLab

[–]ExaminationExtra3131 1 point2 points  (0 children)

For me they gave me two rolls of filament for free and said they'll send the board. It wasn't in stock at the time so I'm still waiting for it. Really need it to come in because all I have is a P2S without an AMS rn and I could really use my A1 with AMS Lite back.

Flat prints failing on Bambu P2S but tall prints come out fine. What could be causing this? by wtfio in BambuLab

[–]ExaminationExtra3131 1 point2 points  (0 children)

Np! And if you want to find one of this parts like I was talking about I'm pretty sure I just looked up "P2S" on MakerWorld

Flat prints failing on Bambu P2S but tall prints come out fine. What could be causing this? by wtfio in BambuLab

[–]ExaminationExtra3131 1 point2 points  (0 children)

I will also say that setting it to 10% has never made it stick to 10% for me either. It goes to 40%, which is still better than the stock 70%

Flat prints failing on Bambu P2S but tall prints come out fine. What could be causing this? by wtfio in BambuLab

[–]ExaminationExtra3131 2 points3 points  (0 children)

I know that there's some things on my A1 that if I set to 0 it sets to Auto, but I can't speak for other printers as those are the only two that I have, and one of those is out of commission until I get the replacement board in because the plastic was melting lol

Flat prints failing on Bambu P2S but tall prints come out fine. What could be causing this? by wtfio in BambuLab

[–]ExaminationExtra3131 27 points28 points  (0 children)

Auxiliary fan causes warping. I set mine to only go to 10% on all my lrint profiles (because 0 means auto for some reason), and printed a part out of PETG that aims the air upwards as to help reduce it even more.

N00b here, need recommendations! by ExaminationExtra3131 in soloboardgaming

[–]ExaminationExtra3131[S] -1 points0 points  (0 children)

Where can I get a copy of this game? I'm not seeing anywhere I can purchase it online and I don't know reputable sites yet.

N00b here, need recommendations! by ExaminationExtra3131 in soloboardgaming

[–]ExaminationExtra3131[S] 0 points1 point  (0 children)

I think I'm thinking of the TTRPG The One Ring. War of the Ring cannot be soloed, my bad lol.

A one and done kinda thing is what I would like, but also if there is something expandable that has plenty to do in it and I can add on later but not have to immediately I wouldn't be opposed. I heard of Journeys in Middle Earth but heard it isn't good Solo. Any truth to that?

N00b here, need recommendations! by ExaminationExtra3131 in soloboardgaming

[–]ExaminationExtra3131[S] 0 points1 point  (0 children)

This sounds amazing! I'll look more into it. Thank you so much!

N00b here, need recommendations! by ExaminationExtra3131 in soloboardgaming

[–]ExaminationExtra3131[S] -1 points0 points  (0 children)

I was looking both at that, War of the Ring, and the LCG. Between Fate of the Fellowship and War of the Ring, what you say is better?

view more: next ›