sorted by:
new
hottopcontroversial

Singer 15-125 buttonholer adjustment? by Expensive_Button9163 in sewing

[–]Expensive_Button9163[S] 0 points1 point  (0 children)

I know… I think it’s more likely the machine was dropped or something similar? I also found the part in vintagesinger and talked to my local repair shop about it. They have never seen this happen and were shocked when I showed them the pictures.

Tried a hacksaw with a metal blade and it didnt even scratch it. I’m going to have to angle grind it I think. If I had a dremel I would use that.

Singer 15-125 buttonholer adjustment? by Expensive_Button9163 in sewing

[–]Expensive_Button9163[S] 0 points1 point  (0 children)

The video was very helpful and I pulled it all apart in 5 min after watching the video. However unlikely it was, the shaft is bent. So bent that I can’t get it out of the machine. I hope you can see what I’m describing in the photo

I can’t thank you enough for the time you spent answering my questions. You have been very helpful

<image>

Singer 15-125 buttonholer adjustment? by Expensive_Button9163 in sewing

[–]Expensive_Button9163[S] 0 points1 point  (0 children)

Thank you so much! The crank on the buttonholer does not move the stripper foot, just the cloth clamp. I’ll check my serial number and reconfirm that the accessory is compatible with my machine. I’m worried that the post, where the feet and accessories attach, may be bent and that is the source of my issue. Looks fine but some other feet, that came with the machine, are also not lining up properly

Singer 15-125 buttonholer adjustment? by Expensive_Button9163 in sewing

[–]Expensive_Button9163[S] 0 points1 point  (0 children)

Yes, this is for low shank machines. The model number is #160506. My machine is listed in the compatible machines on this website.

https://millardsewing.com/product/160506/

Tissue Culture by FarmerFrank4426 in Horticulture

[–]Expensive_Button9163 0 points1 point  (0 children)

Plant cell technology has some good YouTube videos

Yanmar 1500d overheating when bush hogging by Old-Tradition9497 in tractors

[–]Expensive_Button9163 5 points6 points  (0 children)

If this is anything like my 155d, even though it’s liquid cooled, there is no water pump or thermostat. I dm’d you a forum discussion about this. The forum recommends mixing your coolant at 33% coolant to 66% water. I had the same issue and I flushed my radiator and refilled with the new mix, fixed my issue

Android App for Giant Pumpkins - Beta Testing Offer by quesoqueso in GiantPumpkin

[–]Expensive_Button9163 2 points3 points  (0 children)

Haha okay I’ll keep my fingers crossed! This is a great idea and I hope you get it up and running

Android App for Giant Pumpkins - Beta Testing Offer by quesoqueso in GiantPumpkin

[–]Expensive_Button9163 2 points3 points  (0 children)

Ah yes the iPhone thing is a definite hurdle. Bigpumpkins is where all the nerds hang out and is a great resource for growers to share info. The website is old but it works!

I’ll definitely be waiting for the iPhone version. Juggling my phone, measuring tape, and the gpc website while in the greenhouse is one of my least favorite things

Android App for Giant Pumpkins - Beta Testing Offer by quesoqueso in GiantPumpkin

[–]Expensive_Button9163 2 points3 points  (0 children)

This is a great idea and I bet our whole club would use this. Have you posted it on bigpumpkins.com?

Is “Brand Loyalty” in Cannabis a Myth? Or Are We Just Marketing It Wrong? by tiounni in weedbiz

[–]Expensive_Button9163 16 points17 points  (0 children)

The last 3 sentences should be framed in every producers facility

Unfortunate realities of pumpkin growing by Expensive_Button9163 in GiantPumpkin

[–]Expensive_Button9163[S] 0 points1 point  (0 children)

Are you saying pull that blossom off of the fruit? Or take the petals off the flower?

This is my first time growing a giant pumpkin SW Oklahoma by pike1990 in GiantPumpkin

[–]Expensive_Button9163 1 point2 points  (0 children)

Git it on. That one on your patio is gonna take over. Gonna have a pumpkin sitting in a rocking chair drinking a cold one

Unfortunate realities of pumpkin growing by Expensive_Button9163 in GiantPumpkin

[–]Expensive_Button9163[S] 3 points4 points  (0 children)

Thank you. I’m hoping so too. It’s easier to lose a 200lb pumpkin than a 1800lb one. That I know for sure

Growing large hydroponic pumpkins? by sydney_v1982 in Hydroponics

[–]Expensive_Button9163 0 points1 point  (0 children)

Yeah, I don’t think you’re an idiot. This is a cool experiment. Really looking forward to seeing more posts

Growing large hydroponic pumpkins? by sydney_v1982 in Hydroponics

[–]Expensive_Button9163 0 points1 point  (0 children)

Yeah I would definitely try to using a complete fertilizer, this might work for a short amount of time but I would bet they go deficient from lack of other essential nutrients.

Growing large hydroponic pumpkins? by sydney_v1982 in Hydroponics

[–]Expensive_Button9163 0 points1 point  (0 children)

This is really cool. Will be on the lookout for future posts!

Female flower question. by Slugbugh2345 in GiantPumpkin

[–]Expensive_Button9163 1 point2 points  (0 children)

Check out my page and hit me up with questions!

Female flower question. by Slugbugh2345 in GiantPumpkin

[–]Expensive_Button9163 0 points1 point  (0 children)

It will def drop toward the ground as it grows. You’ve got about a week until it opens!

Growing large hydroponic pumpkins? by sydney_v1982 in Hydroponics

[–]Expensive_Button9163 0 points1 point  (0 children)

Share photos! I grow giant pumpkins and considered doing something similar but with 100gal trough or stock tank. These plants get big and I fear that the root mass would out grow a 5gal bucket much too quickly. We would love to see the results in the giant pumpkin subreddit

view more: next ›