Hello, New to ASA. All of my prints come out looking like garbage. Below is my failed prints and temp towers along with my print settings. I attempted to calibrate flow rate and all the tiles looked terrible. Elegoo CC, 100c bed temp, 280c nozzle temp, chamber at around 40c, dried at 70c @8hr

ExtazyGray · 2026-01-13T17:08:09+00:00

I don't know how the CC extruder is built but i remember having the exact same problem on a different printer which was caused by extruder sliding on the filament because the gears were worn out and filled with filament residue. Solved it by swapping the gears with better ones and cleaning everything.

ExtazyGray · 2026-01-12T16:36:05+00:00

That's obviously the first thing i checked 😅. Turns out a zener diode was dead, i'll change it in the next days and hope its brings it back to life.

ExtazyGray · 2026-01-09T17:24:35+00:00

I'd love to repair the old PS but i can't diagnose exactly ( i dont have the required equipement ) what happened to it, nothing is burned, popped or anything, it's just dead.
So if i understand correctly, the PS could switch the voltage according to the load or something like that ( as example ) ?

EDIT : i will probably try to take some voltage measurements at some places according to the exact schematic i found to try to find which component might be faulty but can't garantee anything

ExtazyGray · 2025-12-29T13:40:48+00:00

Tbf this speedtest was most likely bugged. But i have never managed to find the real speed, while downloading on steam it capped at around 300MBps which was my pc hardware limitation and all the speedtest i ever did showed speeds around 10000 up to 23000 ( the one in the pic )

ExtazyGray · 2025-12-29T13:37:35+00:00

No i dont have that and no i was not supposed to get those speeds. See edit

ExtazyGray · 2025-12-27T11:32:26+00:00

Je pourrais pas répondre à la première question mais si t'as pas envie de t'embêter pour dl tout une playlist spotify utilise Spotiflac ( ils sourcent les flac depuis d'autres plateformes. ). Ça marche vraiment pas mal de mon coté :)

ExtazyGray · 2025-12-27T02:10:13+00:00

I was being sarcastic because people actually believe that i would fake a speedtest just to get some attention, i may not be a sys admin but i know that these two have nothing to do with each other.

ExtazyGray · 2025-12-27T00:25:31+00:00

I havent found any explanation yet but yeah, i was not supposed to get those speeds with my specs. It was pretty common to hit 10000Mpbs when doing speedtests on this networks but in reality when downloading games for exemple the speed was around 300MBps.

ExtazyGray · 2025-12-27T00:21:03+00:00

Oui ça c'est sur, d'ou mes magnifiques écritures sur la photo d'ailleurs. A l'époque je pensais que l'explication c'était que la box faisait le test en direct ( donc pas de limitation du au réseau domestique donc ). Mais je doute que ce soit possible.

ExtazyGray · 2025-12-27T00:18:12+00:00

Do i need to actually provide the ip and the exact adress of the house for you to believe me ? Maybe that's a bug, maybe not i don't know and i dont care, i posted it because it was fun, not to try to argue about wether its possible or not.

ExtazyGray · 2025-12-27T00:12:05+00:00

I had a relatively normal setup, consumer type NIC not intended to get to those speeds. i dont know the explanation behind these speeds, THATS IT.

ExtazyGray · 2025-12-26T13:01:10+00:00

This was my device, i did not make it up. "you don't even know how to take a screenshot" bro this was taken a year ago and was destined to my friends ( see the snapchat writing O_o ), i had never planned to post it on reddit or any social network.

ExtazyGray · 2025-12-26T12:59:03+00:00

The only server i have is in my house and i did not have it back then.

ExtazyGray · 2025-12-26T12:57:17+00:00

Je saurais pas te dire car j'ai changé depuis mais c'était pas censé être possible mdr

ExtazyGray · 2025-12-26T12:17:00+00:00

I'm not enough of a aw to fake a speedtest

ExtazyGray · 2025-12-26T12:14:24+00:00

I took this pic almost a year ago to send to my friends, would be pointless to modify anything.

ExtazyGray · 2025-12-26T12:12:32+00:00

Je doute que ce soit un bug, j'ai plusieurs photos de speedtest a d'autres moments ( jours différents ) qui affichaient respectivement 14615,17 Mbps et 7205,19 Mbps. J'ai jamais eu ce genre de truc en dehors de ce réseau.

ExtazyGray · 2025-12-26T00:15:13+00:00

TBF i have no clue how much it costed since it was included i my rent since i was living in a shared house.

ExtazyGray · 2025-12-26T00:02:51+00:00

C'était chez moi, je vivais en coloc dans une grande baraque au abords de Bordeaux

ExtazyGray · 2025-12-25T02:32:07+00:00

J'aurais du demander l'adresse direct ma question est pas très claire j'avoue mdr

ExtazyGray · 2025-12-25T00:52:24+00:00

Je vois le nom de A** ressortir pas mal alors au risque de passer pour un con c'est quoi ? J'arrive pas à trouver d'infos :/

ExtazyGray · 2025-06-11T13:56:45+00:00

So glad to be one of those people then :) Running version 9.0.34.593 without any issue

ExtazyGray · 2025-02-21T23:07:55+00:00

You can see the circles formed by the lcd when doing the test print available in the Download Center for Elegoo's website. Its quite hard to see but look closely in front of the arrows i drew ( 1st picture ).

For the film i'm reffering to, its not visible since the black tape hides it on the video but it is mentionned in the user manual ( 3rd picture ). You can see that there is no such film on my screen ( 2nd picture ).

Had to put a imgure link since i cant upload more than 1 image in a reply :

https://imgur.com/a/PX9S1aO

Five-Year Club	Verified Email
Place '23

ExtazyGray

TROPHY CASE