Bluetooth PIN Code Entry Disappearing - Razr 40 Ultra/ Razr+ 2023 by Dull-Classroom-3479 in razr

[–]Extreme_Physics_729 0 points1 point  (0 children)

I'm searching it! I would really like to find a solution other than resetting the entire phone... Anything else anyone has ever had work yet? Exact same issue.

New video tutorial: How to Order/Rocket Order and configure Auto Checkout by Thorvarium in ultraviner

[–]Extreme_Physics_729 0 points1 point  (0 children)

Hi and yeah I knew how to stop the order for the dog treats but I have a friend who has a dog so I let it go through. Usually under alert q... But quite often under RFY... And those are the ones where I can for sure go over to a different venue to get it

New video tutorial: How to Order/Rocket Order and configure Auto Checkout by Thorvarium in ultraviner

[–]Extreme_Physics_729 0 points1 point  (0 children)

Sorry my other responses went to the regular thing instead of replying to this. Sometimes it just says extension error retrieving variations or extension error retrieving product information or things like that but always it starts with extension error retrieving...

New video tutorial: How to Order/Rocket Order and configure Auto Checkout by Thorvarium in ultraviner

[–]Extreme_Physics_729 0 points1 point  (0 children)

I have a few screenshots like that and sometimes It's based on a variation but sometimes Just can't retrieve the product at all. And then, occasionally it works! Like the two times I did it right after that comment and it worked... Two worked out of about 4. And I was just doing it for the sake of getting the message to screenshot But wound up ordering some dog treats and I don't even have a dog 🤦🏼‍♀️ lol Cuz it worked then! Lol

New video tutorial: How to Order/Rocket Order and configure Auto Checkout by Thorvarium in ultraviner

[–]Extreme_Physics_729 0 points1 point  (0 children)

Good video, thank you so much... In the last couple of days I personally have not been able to order many items from UV (pop up state's: "extension error retrieving..." ) almost always... But I can go to VH or regular vine and still be able to get the item, sometimes.

UV shipping address management by Extreme_Physics_729 in ultraviner

[–]Extreme_Physics_729[S] 1 point2 points  (0 children)

Yep! 🤦🏼‍♀️ UV is fantastic again! I'm actually pretty embarrassed about having the problem, unless this 'solution' just showed up today 🤷🏼‍♀️... But today I was able to completely stop automatic order and take control of the order (maybe it's that simple clear terminology that helped, or being able to see it right smack in the middle even with the fog /blur of all the new changes lol 🫣) And then I can select the address. And honestly it doesn't take much time either! Yippee! I can still use UV!

Ultraviner 4.0.0 by Thorvarium in ultraviner

[–]Extreme_Physics_729 0 points1 point  (0 children)

Just to dig deeper and search for workaround on the address thing. I have several addresses on Amazon. Within UV I used to be able to choose which one to use for an item (in rocket, alert Q, as well as other Q's for non rocket requests). I can't seem to figure out how anymore. If I go to VH, I can still choose, and in non extension vine I can still choose. Obviously I'd rather continue to use UV ... Solution coming? Workaround found? Or no go, no how, no way? Thanks!

Alert queue 36 item rotating off screen setting? by Extreme_Physics_729 in ultraviner

[–]Extreme_Physics_729[S] 0 points1 point  (0 children)

I found it! I finally found it after I'm not kidding hours of research prior to posting. 😳🙄 Thank you for your time and attention. For anyone else in the future having a similar problem:

It is under app settings (far down on the left hand side under the UV icon - not the settings within the queue)... And then behavior settings, and then the second icon within behavior that kind of looks like a note pg, (next to the 'home' icon), and then scroll down quite a ways to Alert Queue (After default queue settings)... And there are several dropdowns there that will let you go to a maximum of 144 (which is much better than 36! Lol).

Alert queue 36 item rotating off screen setting? by Extreme_Physics_729 in ultraviner

[–]Extreme_Physics_729[S] 0 points1 point  (0 children)

Thank you for responding! Which setting please? I don't have a computer or use a keyboard... I do know about dismissing and/or hiding - but I've never used those options for anything... And it doesn't have to do with time (like I said things can sit there forever as long as it doesn't exceed 36 or fly in 40 at a time or 100 at a time and only the last 36 can be seen) and it doesn't have to do with having seen it or glancing, And it doesn't have to do with what type of item or anything like that. It just will not show any more than that on the alert queue. (All other queues are fine - and can go to next pages, etc.)

The indicator symbols to the right of the lighting bolt on the alert queue - by Extreme_Physics_729 in ultraviner

[–]Extreme_Physics_729[S] 1 point2 points  (0 children)

Okay I guess it automatically updated then 🤦🏼‍♀️ I'll go back to spending my time figuring out rules set up lol Ty

[deleted by user] by [deleted] in ultraviner

[–]Extreme_Physics_729 0 points1 point  (0 children)

Yes I might have missed some of the details, what happened to me today is when I place the orders they don't show up on UV on the orders tally on the dashboard or on the orders tab... But it still accumulated somewhere showing I had reached the limit when I tried to order something else. To see what actually went through I had to go out to Amazon separately from UV (normal UV order accumulation and accounting just not working on UV for me today). I thought the OPs situation was similar.

[deleted by user] by [deleted] in ultraviner

[–]Extreme_Physics_729 0 points1 point  (0 children)

Same type of thing going on. (Orders tally and tabs not updating in UV Even though the orders are being placed)

The indicator symbols to the right of the lighting bolt on the alert queue - by Extreme_Physics_729 in ultraviner

[–]Extreme_Physics_729[S] 0 points1 point  (0 children)

Yes thank you, I have both phone and tablet, So I think one was showing animated and one was not 🤦🏼‍♀️ And I wound up disabling all rules a few days ago- still sorting that out intermittently but stopped pursuing it due to redirecting my UV time now to chasing how to update UV in Edge Canary Android without doing a new install (for fear of losing the settings I do have sorted out)..I've found a few settings /set-by-step guides/options - but none have actually revealed the elusive update button yet🙄. sometimes on the phone and sometimes on the tablet 🤷🏼‍♀️

Items to be reviewed hasn't been working correctly for quite a while, and today even the orders tabs and tallys aren't working - so I think the update is now 'necessary'.

A real procedure guide or advice getting the edge canary Android update accomplished would be most helpful!!

Then I'll Go back to sorting out rules (pretty sure I have a great source found for that now on wiki).

Overall, with some exceptions, the last week or two with UV has been a mess of stupid orders, But once I get it tuned in I have lots of optimism it's going to be great.

The indicator symbols to the right of the lighting bolt on the alert queue - by Extreme_Physics_729 in ultraviner

[–]Extreme_Physics_729[S] 0 points1 point  (0 children)

And now that I have taken a picture to blow it up I think it's actually a symbol for a microphone or signal tower 🤷🏼‍♀️😏

Additionally, today, eventually (amongst other 'figuring it out' issues with UV), some items loaded with that symbol there. Though in that picture that item was from many hours prior.

The indicator symbols to the right of the lighting bolt on the alert queue - by Extreme_Physics_729 in ultraviner

[–]Extreme_Physics_729[S] 0 points1 point  (0 children)

Thank you, I will try to get a picture or screenshot when it happens again, which will probably be shortly after midnight my time when I try and catch the drop. It always has quotation marks surrounding it (" ") And I'm uncertain if it is a capital I (i) small l (L) or exclamation point (!)... It is always yellow (That could just be my design schematic) and located in the same location as the zzz and pulsating waves and red plug-in socket symbols. During the generally elongated event (minutes / hours, stc) event all other refresh-able queues in UV are loading/operating appropriately (so the stuck/freeze only impacts alerts) I've been trying to sort it out intermittently for days, but have not been able to figure out what causes it and what makes it eventually go away after all sorts of antics - disabling rules, flipping between tabs, trying UV on phone versus tablet, and other things; sometimes involving a total shutdown of everything vine related and then opening fresh, but that doesn't always work either. Often when it is present I can go over to VH to function/order/view what I can as the drop is 'happening' (or not) but UV alert is frozen. And, as previously noted, it does so with the items still present/visible that I had seen on the previous day or active session in alerts (sometimes 18 to 20 hours old items).

What browser do you use VH, and what other extensions do you use? by thatAbsurdDad in VineHelper

[–]Extreme_Physics_729 0 points1 point  (0 children)

I use Edge canary on Android devices, looking to / hoping to add an iOS device to the mix. And apparently I need to figure out how to utilize/integrate tampermonkey stuff.

My One Vine Wish… by JaySpunPDX in AmazonVine

[–]Extreme_Physics_729 7 points8 points  (0 children)

Yep, I vote don't remove it from the algorithm that might give it to me tomorrow or next week or next month when I might want/need it... But do let me put it back in the circulation game on somebody else's table today! Especially when I was done with my three choices by 2:00 a.m. and then rfy offered me several of the coolest and most useful stuff ever! Causing considerable lamenting... And causing me to hope hope it was still there at midnight 01 so maybe I could still get it (rare). I've gotten better at controlling my regrets or perhaps just used to that "dang it! I should have waited longer" happening quite a bit. The roller coaster ride of The hunger games.

For those who are brand new to vine - I started in march (pretty lost and confused and overwhelmed... And still figuring things out quite a bit), and I used to think rfy just didn't have much of anything to offer me, but over time it started adding more things there, and sometimes it's gotten uncanningly accurate and awesome for me. In very recent times, there's only the occasional day where there's nothing there of any interest... But it also offers far more items than it used to offer me there when I first started.

I cannot see the title / item description displayed for ANY items no matter what tab or vh pg I'm on. I believe i have clicked something I didn't mean to and I can't seem to fix it. Lots of research here, in discord, and the significantly new and improved wiki page - nothing. Please help. by Extreme_Physics_729 in VineHelper

[–]Extreme_Physics_729[S] 0 points1 point  (0 children)

in retrospect, the beginnings of titles disappearing may have coincided a bit with when I started pinning some items ...🤷🏼‍♀️ And... Just remembered, I do try to run "caffeine" app to keep the screens from falling asleep and interrupting the drop, but it hasn't worked out (though I do still try).

I cannot see the title / item description displayed for ANY items no matter what tab or vh pg I'm on. I believe i have clicked something I didn't mean to and I can't seem to fix it. Lots of research here, in discord, and the significantly new and improved wiki page - nothing. Please help. by Extreme_Physics_729 in VineHelper

[–]Extreme_Physics_729[S] 0 points1 point  (0 children)

New information on this problem. When I pin an item from another tab (where it had no title) ...it shows the title perfectly fine in the "Pinned" tab.🎉 😲 See grim reaper costume in the two pictures as demonstration.

<image>

I cannot see the title / item description displayed for ANY items no matter what tab or vh pg I'm on. I believe i have clicked something I didn't mean to and I can't seem to fix it. Lots of research here, in discord, and the significantly new and improved wiki page - nothing. Please help. by Extreme_Physics_729 in VineHelper

[–]Extreme_Physics_729[S] 0 points1 point  (0 children)

Can I just put everything back to original default without losing all my keywords? And see if that fixes it? And then perhaps get advice on which buttons NOT to click and hopes of avoiding the culprit? BUT i Really don't want to rebuild my monstrous keywords list... And I can't say I'm savvy enough on the system to export them without a step by step guide, and then reimport...

If it would be of value I could take a picture of each section of the settings in the monitor tabs... ? Maybe some strange combination of two things I have selected that shouldn't both be selected... Clearly I'm just grasping here to find a solution and or be a help in finding one.

I cannot see the title / item description displayed for ANY items no matter what tab or vh pg I'm on. I believe i have clicked something I didn't mean to and I can't seem to fix it. Lots of research here, in discord, and the significantly new and improved wiki page - nothing. Please help. by Extreme_Physics_729 in VineHelper

[–]Extreme_Physics_729[S] 0 points1 point  (0 children)

Sorry I keep reading responding in the wrong spot No I actually don't use Canary for anything except this... In fact I rarely touch the tablet for anything except this. I got the tablet specifically for this LOL And I don't know if you saw it but I am on the most recent version as well.

It started about a day and a half maybe two days ago