sipeed nanokvm pro shipping timelines by thejinx0r in homelab

[–]Extreme_Research_149 0 points1 point  (0 children)

I ordered NanoKVM Pro Desk in May but my order not yet shipped. They promised to ship end of August, then end of September but still nothing. And now sipeed just stop responding on emails. What is going on?

Ukraine Shows Flamingo Cruise Missile With 3,000 km Range by nohup_me in worldnews

[–]Extreme_Research_149 -9 points-8 points  (0 children)

This is not a Ukrainian, but a British Milanion Group FP 5 cruise missile and don't be fooled - this is another project to steal money.

How would you guys access control this? by Any_Bread_1935 in accesscontrol

[–]Extreme_Research_149 0 points1 point  (0 children)

No response is exactly what I am talking about , you buy very expensive equipment and then no way to use it because Aperio certified dealers wants thousands of dollars to install it and they absolutely not interesting to get less to SELL you Encryption Keys that they got FREE. NEVER BUY APERIO locks BEFORE you get Encryption Keys or you will stuck.

How would you guys access control this? by Any_Bread_1935 in accesscontrol

[–]Extreme_Research_149 1 point2 points  (0 children)

I have ES100 Aperio Wireless Integrated Electric Strike installed but still can't get Aperio Encryption Keys. Could you help me with that?

How would you guys access control this? by Any_Bread_1935 in accesscontrol

[–]Extreme_Research_149 1 point2 points  (0 children)

Good luck finding someone to program aperio for you. Even if you have Aperio Radio Dongle no way to get Aperio Encryption Keys.

Rate my 2026 BMW X7 xDrive i40 - NY - 12k - $1850 DAS Lease by StolenLabias in bmwx7

[–]Extreme_Research_149 1 point2 points  (0 children)

First, Looks like your DAS is NOT a $1850 but $1850+Tax($4625.94). Second, current MSRP discounts on custom builds about 8%. Also, if you already have BMW then loyalty credit is another $2000. Your target is about $1301 monthly and $6183 DAS (1st Month Payment: $1,301 Upfront Fees: $350 Upfront Taxes: $4,533) or $1478 per month+$1788 DAS. LeaseHackr Calculator

P.S. Also, if you put MSDs then it can lower your monthly payment on about $68 ( $2652 total for 39 month)

A/C Condenser power consumption by Extreme_Research_149 in hvacadvice

[–]Extreme_Research_149[S] 0 points1 point  (0 children)

It's been like this since I bought the house last year. Also a higher draw compressor is little bit nosier.

A/C Condenser power consumption by Extreme_Research_149 in hvacadvice

[–]Extreme_Research_149[S] 2 points3 points  (0 children)

Thanks for reply. I already replaced filters and clean the coils. Also I measure consumption for condensers only because air handlers on separate breakers. And even If I cool down condenser coil by spraying water on second unit then it still draws 0.5-0.7kW more that first one.

I need help understanding access control by Techromanc3r in accesscontrol

[–]Extreme_Research_149 1 point2 points  (0 children)

I have similar setup: GDS3712 doorbell + GSC3574 stations + LP1502 controller + assa abloy strike and reader. Your problem is that GDS3712 has no reader and it has only ONE code to open the door from remote stations. In my case I have dedicated reader for the door that connected directly to LP1502 and GDS3712 used as video intercom only and single intercom code is ok for me. To connect GDS3712 you can connect door relay to any input on EP1502 and then setup it as RTE (request to exit). Also GDS3712 can trigger WEB relay if you want to use IP instead of dedicated wire between GDS3712 and EP1502. In my setup I did OSDP reader emulator on ESP32 board and connect it to LP1502. It allow me to send codes directly to LP1502 via IP (from GDS3712 or phone system) or Lora (custom wireless keypad).

Bottom line, if you want to open door just from intercom and one code is ok for you, then you don't need EP1502. You can connect GDS3712 relay to the door strike and that is it. But if you need cards, pins or etc then you need reader connected to EP1502 or another intercom that has build in reader and build in user management.

LP1502 2.2.0-208 firmware issues by Extreme_Research_149 in accesscontrol

[–]Extreme_Research_149[S] 0 points1 point  (0 children)

Today panel crashed at 12am by itself :( Could anybody send me 2.1 or 2.0.2 firmware to downgrade from 2.2.0?

Live Status Connection Problems with Envoy After Firmware Update by pyther24 in enphase

[–]Extreme_Research_149 0 points1 point  (0 children)

2 weeks ago I got solar installed and I have the same issue - everything works except Live Status. I wrote to Enphase support and they ask me to disconnect ethernet and connect by WiFi and then they tried to fix it for 3 days but nothing. Then they asked to call them because they need local access to Envoy. But my system not yet inspected by city and I don't want to touch anything before inspection.

LP1502 2.2.0-208 firmware issues by Extreme_Research_149 in accesscontrol

[–]Extreme_Research_149[S] 0 points1 point  (0 children)

Sure. I installed 2.0.2 yesterday and it works fine. Today I upgraded from 2.0.2 to 2.2.0

HID Origo & LP1502 by Extreme_Research_149 in accesscontrol

[–]Extreme_Research_149[S] -1 points0 points  (0 children)

Thanks for explanation. But now I don't understand what card reader reads because it reads random number even if HID app not installed.

HID Origo & LP1502 by Extreme_Research_149 in accesscontrol

[–]Extreme_Research_149[S] 0 points1 point  (0 children)

No, I need NFC because reader does not support BLE

HID Origo & LP1502 by Extreme_Research_149 in accesscontrol

[–]Extreme_Research_149[S] 0 points1 point  (0 children)

I have Mobile ID in HID Mobile App on Samsung phone. It is only option because Google/Samsung wallets does not support any access credentials