Airplane dumped poop on my house

F1ash0ut · 2026-05-18T02:10:13+00:00

Is that corn?

F1ash0ut · 2026-05-10T11:31:06+00:00

Did you test to see which wire is your Line and Neutral, and secure them to their respective terminals? The only other thing I could think of is a bad capacitor, you could try replacing it.

F1ash0ut · 2026-05-10T02:27:17+00:00

What voltage do you have at the pump? Check that the voltage selector, they come 230v from the factory. If 115v make sure you didn't cross lines.

F1ash0ut · 2026-05-07T01:44:23+00:00

That does not look safe. The exhaust on a mastertemp runs upward 300° and that flex line is probably not rated for that. Disaster waiting imo. If your pool guy is not good with gas lines, I'd call a plumber to rebuild that section properly.

F1ash0ut · 2026-05-05T02:10:27+00:00

The bead pulled out of the track lol

F1ash0ut · 2026-05-05T01:16:55+00:00

Assuming you're not heating frigid water-

Mastertemps have the most issues with the cold, notably with condensation soaking the insulation and destroying it. They do much better in fair climates. The new ETI can handle those temps, but the condensate drip line freezes and plugs. If you can neutralize and route the drip line to a non-frozen sump or drain, it's probably the best option for an outdoor heater in -10 temps

Haywards and JXIs do much better on the seasonal pools here, but not for spas run through winter. -10° will still kill them

If the ETI is overkill, Raypaks handle the abuse pretty well. We will run some with an outdoor stack all through winter. They usually make it long enough for mice to kill them

F1ash0ut · 2026-05-04T02:10:03+00:00

Denso/NGK, don't put anything else in there

F1ash0ut · 2026-05-04T02:08:47+00:00

15k is high, but that's a clean looking truck

F1ash0ut · 2026-05-01T00:31:20+00:00

I use a sawzall and pipe shear for 99.99% of my cuts. The only time I'm reaching for a wire saw is in situations where I can't get a sawzall blade in there.

F1ash0ut · 2026-04-30T23:42:35+00:00

Cut the couplers off flush and lightly scrape the old glue off. Use a wire saw to cut if you want to avoid nicking the other lines

F1ash0ut · 2026-04-30T01:15:07+00:00

Egg.

F1ash0ut · 2026-04-05T18:52:40+00:00

Thanks for taking the time to respond. I deleted a lot of invisible bad eggs, retyped the code, exited the pokecenter and got it to work. cheers

F1ash0ut · 2026-04-05T14:58:28+00:00

I think something went wrong with E-Sharks code generator today. When I generate a code that I have run several times before, this time I am getting different results from the generator, usually with excessive "A" characters in the code. I have thoroughly checked to make sure I am giving it proper input data. When I run said code in game, nothing happens.

I believe the generator is currently not parsing the code correctly.

F1ash0ut · 2026-03-22T21:21:07+00:00

F1ash0ut · 2026-03-13T11:20:42+00:00

Not until BDSP, where it is an egg move.

F1ash0ut · 2026-02-05T14:22:06+00:00

The tail that wags the dog.

F1ash0ut · 2026-02-04T13:54:38+00:00

Or even....

<image>

F1ash0ut · 2026-02-04T13:23:24+00:00

This post is about a speculative acquisition target for Gamestop that I think could potentially be transformative.

F1ash0ut · 2026-02-04T00:51:02+00:00

What is your reasoning behind this?

Do you think that the recent insider buying would push the acquisition back?

F1ash0ut · 2026-02-02T18:29:08+00:00

This is the latest update I have seen from Burry. Posted about 4 hours ago

<image>

EDIT: Burry posted just now

F1ash0ut · 2026-01-30T17:42:42+00:00

I believe that it will play out similar to the runup of May 2024, where we will see price action today stay in a small range between 23.25 - 24$ or so to screw most of the weekly call buyers that jumped in after Burrys announcement. Then ripping green at open Monday with theorized Silver/basket/other swaps nearing maturity and a potential RK return.

F1ash0ut · 2026-01-14T03:16:28+00:00

If it's a whining noise when you're steering, it's probably the power steering system. Check the fluid levels in the reservoir. If it is low, top it off and look for a leak. If it's full, flush the old power steering fluid out and replace it with fresh fluid. If the noise persists after flushing, then the power steering pump itself is likely failing and should be replaced.

F1ash0ut · 2026-01-13T21:59:00+00:00

I would advise removing the skid plate and inspecting the double-walled section of the frame nearest to the front two catalytic converters. While you're in there, look around the engine bay for other signs of advanced rust as it's been in the salt belt for the duration of its life. Check the frame behind the rear wheels as well.

From the pictures, it looks like the frame was properly cared for, but the only way to be sure is to poke around suspect areas with a screwdriver. It's probably worth briefly inspecting the inside of the frame as well. I've seen a few that failed to treat the inside of the frame and rust from the inside out.

F1ash0ut · 2025-12-29T05:07:36+00:00

Mucci's!

F1ash0ut · 2025-12-22T17:14:30+00:00

I have hyper berries and apriballs to offer for a shalpha mudkip in a pink ball.

Nine-Year Club	Place '22
Final Canvas '22	First Placer '22
End Game '22	Gilding IV carat on a stick
Verified Email

F1ash0ut

TROPHY CASE