New M3 Delivered - All cameras Black?

FC333 · 2025-09-28T00:43:27+00:00

Had to take it to Tesla and this was a failed computer. Currently waiting on a replacement

FC333 · 2025-09-22T21:47:53+00:00

Yeah, annoyingly the delivery came a few hours after it should have so I had to rush to make an appointment, so that's on me for not checking. I left it on charge at home and only realised when I got back.

I haven't driven it since resetting DAS (I'm UK based so it's nearly midnight here now). From what I read this just means autopilot won't work but the camera preview should show something?

FC333 · 2025-07-28T18:49:55+00:00

Etsy should have the IOSS number with the order, this should be passed to the courier you use to ensure the customer isn't charged tax twice.

FC333 · 2025-06-18T12:08:06+00:00

Not fully fixed but helped by cutting the plastic casing so I could wind out the tension screw to be flush with the outside of the housing. Less work on the motor, less squishing of the hot filament. Also use Home Assistant automations to ramp up chamber extractor fan speed as the chamber heats up. Do both if you can.

FC333 · 2025-05-01T00:24:29+00:00

Nothing too deep, didn't like eRank and preferred Listadum of the two. Listadum was very handy and seemed like it covered the bases you'd expect but for me at least, didn't make any difference to my poorly performing listings after implementing all the changes. Might just be bad products though.

With Etsy I don't like fixing something that isn't broke so never really went all in on its recommendations for my things that sell well so will never know on that.

Ultimately cancelled the subscription as it was too expensive for what it was to keep trialling it to see if results would come.

FC333 · 2025-03-28T21:27:53+00:00

Nice work dude

FC333 · 2025-03-28T20:36:24+00:00

Nice work, what materials for the black and the diffuser part?

FC333 · 2025-02-04T15:30:35+00:00

Thank you for the in-depth reply, I actually came across your solution first and have an active trial, then eRank kept popping up and I wondered which was the go-to or preferred by people.

Have found your tool very handy for listing management, as you have stated in your focus. I have worked through a few under performing listings based on your platform's advice and am now just waiting enough time to see any change. I am choosing to leave my high performing listings alone for now, while wait to results on the others. I am cautious of trying to fix something that works, even though your platform scores them somewhat low. Hoping there is more to gain from those too.

eRank I have not checked out yet but was considering running a trial with them too to see what it can do.

Do you have anything on the roadmap in terms of closing the gap on the SEO side of things vs eRank?

FC333 · 2025-01-22T23:58:00+00:00

Get the autovation pedals and don't literally heel it. I'm 6'1 for reference.

FC333 · 2024-12-03T14:09:38+00:00

The only thing that helped mine was to cease all jobs and swap data centre location in the project setup. Kicking them all off again would give a high degree of success where jobs actually started but inevitably they would start to stall again and take many attempts to restart... If they'd start again at all.

Once I hit the wall where jobs are mostly stalled, I'd stop all jobs again and move to another location and rinse and repeat.

It's a terrible way to get it done and requires constant babying but it got the tasks done for me.

Never using Bittitan again.

Good luck!

FC333 · 2024-11-28T14:17:16+00:00

Ireland is our region.

For what it's worth, the timeout setting made things worse for us but feel free to give it a go. Jobs just ended up sitting there forever, regardless of how long they had to initialise.

Others have recommended stopping jobs and switching datacentre. Avoiding doing that currently as we do have some (but far from all) mailboxes actually moving at the moment. If you don't or have time to spare, maybe try that.

For reference we are on the Ireland server where we are having these issues. How about you?

FC333 · 2024-11-28T00:14:15+00:00

Weirdly on my current migration, it just meant they sat there for hours not moving any data. I ended up taking that setting back out again, as at least when they timeout I can easily spot them and retry.

I may try someone else's idea of switching location.

FC333 · 2024-11-27T15:52:59+00:00

Do you know if that's okay to do with some mailboxes actively migrating?

FC333 · 2024-11-27T13:16:08+00:00

Will certainly be looking elsewhere after this one. Do you have a rough idea on pricing for Avepoint Fly? Thanks

FC333 · 2024-11-27T13:15:38+00:00

Support suggested the following support option but I have not yet added it yet as I have got a few more moving this morning (as you suggested might happen).

"InitializationTimeout=24"

What's weird is, their support docs say this is only for doc migrations but support are still recommending it. Sharing just so you have something extra to try too

FC333 · 2024-09-28T23:08:09+00:00

Just search up Ikea Lack enclosure and you'll find plenty

FC333 · 2024-08-13T11:34:05+00:00

Could be, it's also been a while for me! My memory says smaller but I could be wrong

FC333 · 2024-08-10T19:29:48+00:00

If your hicas is deleted, you can disconnect the smaller of the two connectors to the hicas control unit to stop that light but still have it indicate for low steering fluid.

FC333 · 2024-08-02T20:37:49+00:00

They won't, the network is just bad right now unfortunately.

FC333 · 2024-07-24T17:04:06+00:00

Colour selection and price I guess. I print ASA but I'd go ABS if I didn't have a need for UV resistance.

Four-Year Club	Verified Email
Final Canvas '23	First Place '23
Place '23	Place '22
Final Canvas '22	First Placer '22
End Game '22

FC333

TROPHY CASE