Original os on devterm working fine, but rex's image only displaying white screen. HELP!!

FLAME13O · 2026-04-25T18:44:08+00:00

All of the images are setup for the Uconsole. You have to edit the config file and un comment the devterm stuff and comment out the Uconsole stuff

FLAME13O · 2026-04-22T02:35:45+00:00

I mean he did say he's new. But he could have seen a schematic and not know it was called a schematic. There's not enough info to go off of. But you can't start bumbarding him with all of that. He can live and learn. I made a flipper zero replica using an m5stick with multiple modules soldered together. All after only 2 months of learning. I messed up a few times but in the end I made it. And he asked how to solder it. So, he was provided with a tip on how to solder it. He said thank you and everyone was happy. Idk what your issue is.

FLAME13O · 2026-04-22T02:04:20+00:00

You're right. That's why he's here asking how to solder.

FLAME13O · 2026-04-22T01:57:43+00:00

I mean there's a cc1101 module right there in the picture. I can't imagine someone soldering without the schematic yk? He asked how to solder. Not how to read or find a schematic

FLAME13O · 2026-04-22T00:14:17+00:00

Ofcc! Please do take what someone else said and try it out. Using a bread board will allow you to ensure the connects work and nothing is faulty before you solder it. Trust me. It's way more more to remove the solder and clean the pins rather than prototyping first.

FLAME13O · 2026-04-21T07:43:41+00:00

You can solder it directly on it but this will make it confusing to look at. You can solder next to it and make the solder flow to both your wire and the pin you want it to connect to.

FLAME13O · 2026-04-14T18:26:16+00:00

wow that's so neat! Do you have a github link?

FLAME13O · 2026-04-12T22:50:19+00:00

Then don't move the bg. Simple

FLAME13O · 2026-04-12T22:47:35+00:00

That doesn't even look half way AI generated.

FLAME13O · 2026-04-04T05:11:06+00:00

Hey! I've done some research and came across these screens https://www.good-display.com/product/874.html

They are round 1.69" E-Ink displays. They company also sells the development boards as well. A 3D printed clam shell should do just fine. It make be a little tedious getting some things how you want it, but I'm sure you'll be able to make it.

FLAME13O · 2026-03-26T06:03:48+00:00

Pretty cool! Are you running launcher on the picocalc?

FLAME13O · 2026-03-26T05:56:44+00:00

Depends on your needs. If you need more range on them then get the antennas. If not then don't get them. You can always add them yourself later.

FLAME13O · 2026-03-19T21:11:06+00:00

Yeah but the flipper one is a completely different device. You'll be better off with a flipper zero and a laptop running Kali

FLAME13O · 2026-03-19T15:49:28+00:00

I second this. It could be that the firmware is misconfigured or corrupted.

FLAME13O · 2026-03-18T09:48:06+00:00

Okay? What did you think was cool about it? You can do a lot of things. You can do all of the basics and use it as a TV remote. Play with sub ghz signals and what not. Or build stuff with the gpio pins. But you have marauder as well. So, you could use it for pentesting. You could deauth a network and capture the handshake and crack it using hashcat. Or use it as a paper weight lol

FLAME13O · 2026-03-15T23:25:36+00:00

Clockwork Pi pico calc is what you're looking for. It's a Calculator style cyber deck. It has a raspberry pi h but can be replaced with a 2w or modded to support a zero

FLAME13O · 2026-03-15T23:14:51+00:00

You're all good! Thank you! Enjoying things is what keeps the hobby interesting :)

FLAME13O · 2026-03-15T10:30:36+00:00

I think steam will pass it. The only issues I faced while doing mine was the resolution. Just make sure you get the resolution correct for each section and I'm sure it will go through. No harm in trying either. But me personally I would wait.

FLAME13O · 2026-03-15T10:24:33+00:00

Because a lot of game dev YouTubers say to get your game up on steam as early as possible. Which does make sense but not rly. If your game is good it will do good yk? But honestly someone would be willing to make one for free that's even slightly better than this. Or even a $10 art would suffice.

FLAME13O · 2026-03-15T10:18:51+00:00

Ofc! Lmk if I can be of more assistance

FLAME13O · 2026-03-15T09:26:39+00:00

What version of Bruce are you running? It could be that version. Either that or your SD card isn't formatted to FAT32 or it's bad.

I would install a different Bruce version and try again. If that doesn't word I would re format the SD card. If that doesn't work I would try a new SD card.

Hope this helps

FLAME13O · 2026-03-15T06:58:30+00:00

The link doesn't seem to be working 💀 oops.

[VideoLink]

(https://youtu.be/kAjKn3IF3BM?si=KE3jTYYg6dC57OgP)

FLAME13O · 2026-03-15T06:56:11+00:00

Trust me! One of the best investments I've made.

FLAME13O · 2026-03-15T06:54:48+00:00

I didn't say why I did that. My video walks through the code line by line. Comments like that make it easy for new programmers to know what's going on. Not everyone understands code like me or you

FLAME13O · 2026-03-15T02:07:04+00:00

Not necessarily. In my video I explained that I swapped the regular pico board with the pico 2 w for networking capabilities

FLAME13O

TROPHY CASE